前來令片套組

適用車型：YAMAHA RD 350 1973 +
YAMAHA RD B, S 250 1973-1977
YAMAHA RD C 250 1977-1978
YAMAHA RD C, D, E 400 1977 +
YAMAHA RD S 400 1973-1976
YAMAHA TX 650 1972 +
YAMAHA TX A 750 1973-1976
YAMAHA TZ 250 1982 +
YAMAHA XS B 350 1976 +
YAMAHA XS B, C, XS2 650 1975-1977

 BREMBO FRONT BRAKE PADS SETQuantity : 1 blister (For  1 Caliper )Using a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.Brembo brake pads represent the best in terms of performance, comfort and durability. They are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.Brembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.Please remind to choose the compound in the dropdown menu when you add the product to your cart. We invite you to compare the measurements indicated in the images.Compounds: RC : A compound conceived solely for track use, a true racing pad suited for any type of competition.The most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.SC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.Genuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer. Genuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.SA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.SP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.Carbon Ceramic (CC) : An organic compound for Scooters with an excellent quality/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.SX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.SD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.TT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.XS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions. It is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.LA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use.NB: La foto è puramente indicativa a dimostrazione della qualità del prodotto.

【訂購前注意】

訂購前，還請詳加確認欲購買的顏色、尺寸等等資訊。

商品多為下定後回覆交期，所以可能有商品停產之狀況

訂單若因為廠商缺貨與暫時無法交貨等因素，則不會成立；訂單若沒有成立則不會收取任何費用。

【退貨注意】

若您需要商品退貨的服務，還請您至退貨區塊進行申請；並請您保持商品外觀、用原包裝外箱封裝完好。

在收到您的退貨申請時，我們會盡快派物流業者前去收貨。

【正品保證】

正品保證之商品，若有被查獲疑似為仿冒品，並經過相關訴訟，最後交由法院判決如實者，將會對購買此商品的顧客進行當初購買價格的10倍賠償。

※ 此商品為歐洲供應商直接採購、進口。因此若訂單成立，本站恕不接受取消該訂購。

※ 若您於商品訂購前，有任何問題；舉凡商品內容、規格、交期等，請透過商品諮詢進行確認。