Ransomware Maze

EXECUTIVE SUMMARY

The Maze ransomware, previously known in the community as “ChaCha ransomware”, was discovered on May the 29th 2019 by Jerome Segura[1].

The main goal of the ransomware is to crypt all files that it can in an infected system and then demand a ransom to recover the files. However, the most important characteristic of Maze is the threat that the malware authors give to the victims that, if they do not pay, they will release the information on the Internet[2].

This threat has not been an idle one as the files of one company were indeed released on the Internet. Even though the company sued, the damage was already done. This is a behavior increasingly observed in new ransomware[3], such as Sodinokibi, Nemty, Clop and others.

It was highlighted last year[4] how ransomware would head in this direction to obtain money from victims who may be reluctant to pay for decryption.

TELEMETRY MAP

On the 29th of October a campaign distributing the Maze malware to Italian users was detected. Historically, the malware has used different techniques to gain entry, mainly using exploits kits, remote desktop connections with weak passwords or via email impersonation or, as in the Italian case, via different agencies or companies[5], i.e. the Italian Revenue Agency. These emails came with a Word attachment that was using macros to run the malware in the system.

The exploit kits used most often were Fallout and Spelevo[6].

The malware is hard programmed with some tricks to prevent reversing of it and to make static analysis more difficult. This report covers these protections and the behavior of the malware in an infected system.

The developers have inserted messages to provoke malware researchers, including the email address of Lawrence Abrams, owner of “BleepingComputer”, who they contacted directly. They are very active on social media sites such as Twitter.

McAfee protects its customers against the threats that we talk about in this report in all its products, including personal antivirus, endpoint and gateway.

MAZE OVERVIEW

The malware is a binary file of 32 bits, usually packed as an EXE or a DLL file. This report focuses on the EXE file.

FIGURE 2. INFORMATION ABOUT THE MALWARE

More information about the sample used in this report appears in this table:

TECHNICAL DETAILS

Maze is a complex piece of malware that uses some tricks to frustrate analysis right from the beginning.

The malware starts preparing some functions that appear to save memory addresses in global variables to use later in dynamic calls though it does not actually use these functions later. Whether it is residual code existing in the entry point of the malware or a trick to mislead researchers is up for debate.

FIGURE 3. SAVE ADDRESS OF FUNCTIONS TO USE LATER IN A DYNAMIC WAY

Later, the malware enters in a big block of trash code that also includes some elements to decrypt strings and important information for later. The malware uses some tricks to detect debuggers at this point.

The most important of those are:

• A big use of the PEB field “IsDebuggerPresent”. This field is a Boolean field that is filled from Windows with 1 (True) if the application is running inside of a debugger or 0 (False) if it is not.
• If the malware detects a debugger it will remain in an infinite loop without making anything while wasting system resources.

The malware gets all processes in the system but ignores the first one (the ‘idle process’ in Windows which is simply a tool to let the user know what percentage of system resources are being used). Using the name of each process it makes a custom name with a custom algorithm, along with a hash that is checked against a hardcoded list. If the hash is found in this list the process will be terminated.

For example, the process of the debugger “x32dbg”, is caught at this point:

It can terminate IDA debugger, x32dbg, OllyDbg and more processes to avoid dynamic analysis, close databases, office programs and security tools.

A partial list of the processes that can be cracked using a dictionary list terminated by the malware is shown below:

dumpcap.exe -> 0x5fb805c5
excel.exe -> 0x48780528
fiddler.exe -> 0x5e0c05b1
msaccess.exe -> 0x6a9c05ff
mysqld-nt.exe -> 0x79ec0661
outlook.exe -> 0x615605dc
pipanel.exe -> 0x5fb805c4
procexp64.exe -> 0x78020640
procexp.exe -> 0x606805d4
procmon64.exe -> 0x776e0635
procmon.exe -> 0x600005c9
python.exe -> 0x55ee0597
taskkill.exe -> 0x6c2e0614
visio.exe -> 0x49780539
winword.exe -> 0x60d805d5
x32dbg.exe -> 0x5062053b
x64dbg.exe -> 0x50dc0542

This short list shows the name of the process to kill and the custom hash from the special name generated from the original process name.

The malware will kill the process with the function “TerminateProcess” that it gets from the EAT (Export Address Table) of the module “kernel32.dll” to increase obfuscation, comparing the name with a custom hash taken from the name in high caps.

The malware calls Windows functions in a unique way to aid obfuscation, i.e. getting the first process in the system to use the function “Process32FirstW”. However, instead of calling it directly, it puts the parameters needed for the function on the stack, followed by a memory address with a “push” opcode and then makes a direct jump to the Windows function. When the function ends, Windows makes a “ret” opcode then gets the last memory address that the malware pushed inside the stack, returning to this address and continuing the flow. An example of this can be seen in this image:

Another ploy utilized by the malware (depending of the sample) is to get the function “DbgUIRemoteBreakin”, using the function “GetProcAddress”, before employing a trick to avoid having a debugger attach to it in runtime[7].

The trick used here is “VirtualProtect” to give the function memory address of “DbgUIRemoteBreakin” permission to write to it:

After gaining permission, which is granted only for 1 byte, the malware patches this byte with a 0xC3 value (the opcode of “ret”) and restores the previous permissions with “VirtualProtect”, again in the same address and byte, removing the write permission.

This is done to avoid having a debugger attach to it in runtime. This way, when a debugger attaches to the process internally, the system calls this function but, instead of creating a thread to start the debugging, the “ret” opcode forces the function to return without creating it. In brief, it prevents a debugger from being attached correctly. It is done before enumerating the system process.

The malware checks the language of the machine with function “GetUserDefaultUILanguage” and saves the value in the stack; it is not checked automatically after the call, but it is important later.

Maze creates a mutex with the name “Global\x” where x is a special value that is unique per machine. For example, in the next screenshot (some information has been deleted to anonymize the machine used for the analysis) is an example of this behavior. It is done to avoid two or more executions at the same time.

The malware, after creating the mutex, makes calls to the function “GetLastError” to check against two errors:

• 0x05 -> ERROR_ACCESS_DENIED. If the malware gets this error, it means that the mutex already exists in the system but, for some reason, the malware cannot access it (perhaps privileges, policies, etcetera).
• 0xb7 -> ERROR_ALREADY_EXISTS. If the malware gets this error, it means that the mutex already exists in the system and can be accessed.

If either of the above occur, the malware remains in execution but does not crypt any files in the system or use any resources of the machine. It means that it will appear in the program list using 0% of the processor.

The mutex value changes either per sample or on a periodic basis to avoid the possibility of vaccines being made against it. The malware also has a command to avoid the ‘problem’ of vaccines which will be explained later.

After the mutex, the malware checks the language previously saved in the stack against, for example, language 0x419 (Russian from the Russian Federation, ru-RU[8]).

The checks are done in an obfuscated way within the jumble of the code that the malware has (in the virtual machine used here the Spanish language of Spain (es-ES) was used; it is the code 0xC0A that appears in the stack in the screenshot):

If the language matches any of those in the list below, the malware will clean the memory and exit the main thread without wasting any resources or making any files.

• 0x419 -> ru-RU (Russian from Russian Federation)
• 0x422 -> uk-UA (Ukranian from Ukraine)
• 0x423 -> be-BY (Belarusian from Belarus)
• 0x428 -> tg-Cyrl-TJ (Tajik (Cyrilic from Tajikistan)
• 0x42B -> hy-AM (Armenian from Armenia)
• 0x42C -> az-Latn-AZ (Azerbaijani (Latin from Azerbaijan))
• 0x437 -> ka-GE (Georgian from Georgia)
• 0x43F -> kk-KZ (Kazakh from Kazakhastan)
• 0x440 -> ky-KG (Kyrgyz from Kyrgyzstan)
• 0x442 -> tk-TM (Turkmen from Turkmenistan)
• 0x443 -> uz-Latn-UZ (Uzbek (Latin from Uzbekistan))
• 0x444 -> tt-RU (Tatar from Russia Federation)
• 0x818 -> ro-MD (Romanian from Moldova, NOT Romanian from Romania!)
• 0x819 -> ru-MD (Russian from Moldova)
• 0x82C -> az-Cyrl-AZ (Azerbaijani (Cyrilic from Azerbaijan))
• 0x843 -> uz-Cyrl-UZ (Uzbek (Cyrilic from Uzbekistan))
• 0x7C1A -> sr (Serbian)
• 0x6C1A -> sr-Cyrl (Serbian in Cyrilic)
• 0x1C1A -> sr-Cyrl-BA (Serbian (Cyrilic from Bosnia and Herzegovina))
• 0x281A -> sr-Cyrl-RS (Serbian (Cyrilic from Serbia))
• 0x81A -> sr-Latn-CS (Serbian (Latin)) (this language code starts from Windows Vista)

The malware tries to delete the shadow volumes in the system using the “wmic.exe” program with the switches “shadowcopy” and “delete”. Prior to this, the malware gets the function of “WoW64DisableWow64FsRedirection” with “GetProcAddress” and uses it to avoid redirection by default in 64-bit operating systems and calls it in a dynamic way.

The malware tries to delete the shadow copies two times, once before crypting the files in the infected system and secondly after crypting them.

This execution is done with the function “CreateProcessW” but, to increase the level of obfuscation, the malware is launched with this command:

As you can see in the image above, the malware uses a command with the name of folders that do not exist by default in Windows, except “Windows”, “system32” and “wbem”. It enters these folders but then promptly exits them using the command “..”, meaning it returns to the previous folder in the path.

For example, in the beginning it enters the folders “ydw” and “fdygg” but later returns to the root of the Windows installation unit with two “..” commands that lead to “C:\” in this case. It later concatenates with the “Windows” folder and continues with the same behavior to finally enter into “system32” where it calls the “wmic.exe” program with the switches to delete the shadow volumes. This is done to try obfuscating this call, though such suspicious behavior may cause an antivirus program to stop it anyway, but it is proof that the malware coders have skills in programming and a good understanding of Windows behavior.

It is important to understand that this “path” used in the command with non-existent folders is random and does not need to use the same number of folders to make the obfuscation.

After the deletion process, the malware gets the function “Wow64RevertWow64FsRedirection” using the function “GetProcAddress” and calls it in a dynamic way to leave the system in the same state as before.

Maze affects network resources too, using the functions “WNetOpenEnumW”, “WNetEnumResourceW”, “WNetCloseEnum” and “WNetAddConnection2W”.

The malware uses two algorithms to crypt the files, ChaCha which is based on the Salsa20 algorithm that is symmetric and, for protection, an RSA algorithm that is asymmetric

In each execution the malware creates a Public BLOB of one RSA key that will be used to crypt the part that holds the information to decrypt the files, and one Private BLOB with an RSA key that allows decryption of the information crypted with the public RSA blob created previously.

Just like other ransomware, this malware has an RSA Public BLOB embedded that will be imported to protect the RSA private BLOB of the victim. Only the malware developers have the RSA private blob to decrypt their public RSA Blob.

This key is protected with a crypto using a key of 32 bits and iv of 8 bytes using the function “CryptGenRandom” to avoid memory dumps but, later, it will need to be decrypted before use.

After this, the malware starts the procedure of crypting the files, searching in units, before importing the RSA public BLOB key generated in runtime. After this, it creates the ransom note prepared for this infected machine in the root folder and then starts looking for folders and files to crypt.

An example ransom note, with some data anonymized, is shown below:

The procedure to crypt the files is easy, with the malware taking the following steps:

• Check the existence of the file with the function “SetFileAttributesW” with the attribute “FILE_ATTRIBUTE_ARCHIVE”.
• Reserve memory to the file with a call to “Virtual Alloc” for the key and iv.
• Open the file with read and write permissions with the function “CreateFileW” with the flag “OPEN_EXISTING”.
• Get the file size with the function “GetFileSizeEx” (it is important for managing big files, “GetFileSize” is not good for bigger files).
• Create a file mapping with the functions “CreateFileMappingW” and “MapViewOfFile”
• Generate a random key of 32 bytes with the function “CryptGenRandom”.
• Generate a random iv of 8 bytes with the function “CryptGenRandom”.
• Reserve 264 bytes of memory with the function “VirtualAlloc”.
• Generate a new random extension for the victim file. Each file has a different extension but does not lose the original extension; the new one is appended to the old one. For example, “1.zip” becomes “1.zip.gthf”.
• Crypt the file with the ChaCha algorithm and the key and iv with the RSA public key generated in runtime.
• Write this new block with the key and iv to decrypt at the end of the file.
• Rename the file with the function “MoveFileExW”. That way it is not possible to use forensic tools to recover the files because they use the same sector on the raw disk. The malware does not delete the file using the function “DeleteFileW” and later create a new one with the crypted data. Instead, all changes are applied in the mapping directly, in memory, without using a file pointer on the disk to read and write, which makes the process much quicker.
• The image of the file is unmapped, and handles closed.
• The process is repeated with new files.

The list of folders that the malware avoids are:

• Windows main directory.
• Games
• Tor Browser
• ProgramData
• cache2\entries
• Low\Content.IE5
• User Data\Default\Cache
• All Users
• Local Settings
• AppData\Local
• Program Files

The malware ignores these file extensions:

• LNK
• EXE
• SYS
• DLL

The malware also has a list of filenames that will not be crypted:

• inf
• ini
• ini
• dat
• db
• bak
• dat.log
• db
• bin
• DECRYPT-FILES.txt

However, it does crypt the file “ntuser.ini” to prevent other ransomwares from crypting it. It creates the ransom note in each folder that it can.

When the malware finishes crypting all files it changes the desktop wallpaper to this image:

The malware tries to make connections to IP addresses that have been crypted in the binary to send information about the infected machine, as seen below:

 

hxxp://91.218.114.4/nwjknpeevx.action?pw=g1y652l&kyn=21y3vvhh&dvr=5e&us=g25e3582a

hxxp://91.218.114.11/forum/siaib.jspx?v=h&xyna=0vip863&eul=xsn3q0

hxxp://91.218.114.26/view/ticket/pigut.jspx?o=664quo0s&fp=ot52

hxxp://91.218.114.25/xrr.jspx?ygad=r35e2cx&e=6as6ta

hxxp://91.218.114.4/j.php

hxxp://91.218.114.11/payout/view/fa.aspx?y=y&qbx=4&kws=n2&iuy=8k7

hxxp://91.218.114.25/lxh.asp?mtxm=l7&r=836wy5

hxxp://91.218.114.26/signin/ticket/eq.action?x=yk6rr&e=50b&q=327dr5&ofk=065cdp

hxxp://91.218.114.31/signin/rnmnnekca.jsp?kdn=6snl5&e=7a50cx4hyp

hxxp://91.218.114.31/forum/a.aspx?byx=56&bc=62t0h&u=75w6n6&sot=2v0l761or6

hxxp://91.218.114.32/withdrawal/checkout/l.do?nuny=qj6&sdv=45g2boyf5q&dnr=rh8lk31ed

hxxp://91.218.114.77/task/bxfbpx.jspx?nq=cge63

hxxp://91.218.114.38/account/payout/ujwkjhoui.shtml

hxxp://91.218.114.37/imrhhjitop.phtml?wto=344dsc84&sp=x&oml=c173s71u&iy=m3u2

hxxp://91.218.114.38/auth/login

hxxp://91.218.114.79/logout/hfwdmugdi.php?upaj=mj7g

hxxp://91.218.114.38/sepa/juel.php?ars=51qse4p3y&xjaq=r5o4t4dp

hxxp://91.218.114.32/fwno.cgi?yd=410&o=y7x5kx371&p=m3361672

hxxp://91.218.114.37/sepa/signout/mjsnm.aspx?r=7o47wri&rtew=uu8764ssy&bri=51gxx6k5&opms=72gy0a

hxxp://91.218.114.77/payout/analytics/lrkaaosp.do?y=62h&aq=3jq8k6&v=0svt

hxxp://91.218.114.79/create/dpcwk.php?u=28qy0dpmt&qwbh=k&f=g1ub5ei&ek=3ee

 

It is important to take into consideration that the malware forges the POST string to make the connection with a random choice from a list of possible strings such as “forum”, “php”, “view”, etc., to make detection harder with IPS or other filters on the network.

The IP addresses are detected as from the Russian Federation but that does not prove that the malware came from this country; it could be deliberate misdirection but, with the language checks of CIS countries, it certainly appears possible.

The use of IP addresses instead of domain names is to avoid DNS resolutions that can be altered or redirected to a loopback, for example using the “host” file in Windows. This makes the trace of IPs more complicated and avoids having the connection blocked.

The malware uses this agent to make the connection, but it can change between samples:

From a memory dump we can extract the IPs used by these connections, as well as a curious string that talks about Lawrence Abrams, the admin of the web site “bleepingcomputer” who was contacted directly by the developers. It is not known why they included this email address because it has no relation to the ransom note and is not used anywhere else. Perhaps it is a means of mocking the administrator of a site that frequently reports on ransomware?

The connections to the C2C IP addresses, in a pcap using Wireshark, can be seen perfectly:

Maze has some strings in memory that are interesting and something that may be worth further analysis in the future:

The webpage for making the payment requested in the ransom note gives a price and verifies that all is correct.

Maze has a chat function to contact the operators and receive information about how to obtain the cryptocurrency required to make payment.

Of course, as with many types of ransomware, there is an offer to decrypt three images for free and that service has been verified as working:

SWITCHES

The malware has some switches that can be used in the command line to launch. These switches can either disable some elements or enable logging.

The switches are:

• –nomutex -> This switch prevents checking the mutex so that it can run more than one instance on the same machine. It can also be used to avoid vaccines that are made before the malware creates the mutex name in the machine.
• –noshares -> With this switch the malware will not crypt network shares, only the local machine.
• –path x -> Where x is a full path. In this case the malware will crypt all files in all folders starting from this path unless they are blacklisted names, extensions or folder names. This is useful for the malware developers to attack a special path instead of losing time going after a full machine and it makes the attack more targeted.
• –logging -> If this switch is enabled the malware will log all the steps it makes. Useful to the malware developers in debug environments, or in the attack phase to know that all was ok, step by step. Here is a small example of this information:

OTHER SAMPLES

In January 2020 a new version of the malware appeared with a special text dedicated to some researchers in the security field. The malware developers appear to have chosen those individuals to be provocative and make fun of them.

The sample was discovered by malwrhunterteam[9] on the 28th of January 2020. The sample has some differences when compared with the previous one that was analyzed in this report. Those differences will be covered later via another sample that was found by Luca Nagy[10] on the 30th of January 2020.

The most important thing here is that the developers appear to have carefully selected the researchers and waited for them to answer as a psychological trick, and it worked, because all of them replied, trolling the malware developers over the version of their malware detected on the 28th.

Here is one response from a malware developer to this trolling that contains some interesting facts:

• It is not known if one person is behind the malware or not. It is curious that they said “I” instead of “we” twice in their answer. So, perhaps it was written by one person for trolling purposes, or perhaps the developer of the malware really is only one person (or they want researchers to think that is the case).
• Another important fact in the note is the talk about the tools used by one of the researchers for regular malware analysis. Why are they mentioning regular malware analysis? Is it because they are reversing malware themselves for fun or could it be their day job? Could it be that perhaps the developer is a researcher (because of the way that they talk with others and provoke them)? Secondly, malware analysis is mentioned more than once and, thirdly, they said that they made an IDAPython script to remove all obfuscated code that the malware has (the ransomware may have got the name ‘Maze’ because of how analysis of it is like walking through a labyrinth). So, it may be either a researcher who knows IDAPro very well or is an advanced developer (and the obfuscated code in Maze is very well done) or perhaps it is a developer that has another job in normal life besides the creation of malware? Of course, these are just possibilities, not facts.
• The malware developer achieved their goal with this interaction as their target audience saw the answer and talked about their malware, as noted in the final line of their response “ …but you need to know that we love you researchers without you our job also would be fuc**** boring as hell”.

It is curious that here they said “we” instead of “I” as before but perhaps they were talking about all malware development?

The differences that these samples have are:

• Usually comes as a DLL instead of an EXE file. It does not run on Windows operating systems older than Vista as this makes analysis harder. By using the malware as a DLL, they can inject this module into a target process more easily than if they use an EXE sample of the malware.
• Instead of deleting the “Shadow Volumes” the developers instead use WMIC with the special trick of the path as mentioned earlier, using WMIC classes to control the Shadow Volumes. An example of this use can be seen in the next image.

Each sample of the malware uses different strings as PDB to send messages or to make the sample unique, for example:

• C:\somerandomsh**\sh**\obama.pdb
• C:\kill\yourself\<nickname>\chinese\idio*.pdb

(In these examples some things were removed or changed to remove sensitive information in the report).

The new samples discovered in January 2020 make these connections to the C2 (or try to make them):

As we can see, they are the same IPs as seen in the previous versions of the malware.

The samples’ compile dates are from the 24th of January 2020 (the first version with the strings that provoked the researchers) to the 28th of January 2020 (the version with the answers to the researchers), meaning they were made on the same day the responses to the previous version were published on Twitter.

Another interesting fact from the later sample is that, besides it saying that the language code used to program it was Korean, the IPs where it connects belong to the Russian Federation as before, as can be seen in the next two images.

It is impossible to know the truth, but this could be a trick to try misleading researchers into thinking that the malware comes from some country when in truth it originates in another. It is known that malware developers often check the language on potential victim’s machines to avoid the CIS countries, so we can guess that the check for the “Korean” language was a trick designed to mislead, but it is impossible to know that for sure. Of course, the “Korean” language can be changed manually, or it could be a Korean packer, but it is impossible to say with certainty.

CONCLUSION

Maze is a ransomware created by skilled developers. It uses a lot of tricks to make analysis very complex by disabling disassemblers and using pseudocode plugins.

It poses a big problem to individuals and enterprises that do not pay as the developers threaten to release the information if they do not receive payment and they do indeed keep their word on that. More and more ransomwares are exhibiting the same behavior and we expect to see more of it this year and perhaps further into the future too.

The malware developers are active on social media sites, such as Twitter, and they are familiar with the work of malware researchers. They also know how to provoke them perfectly and they like to play cat and the mouse with them.

We recommend making periodic backups of files and keeping them isolated off the network and having an always updated antivirus in place. The latest software patch should also be applied. Remote Desktop Connections that are not needed should be avoided.

Avoid suspicious emails and do not open attachments that come from anyone that you do not know. The same goes for links in emails and, even if they come from a known source, check with the sender if you have any doubts. Also, disable macros in Office programs and never enable them unless it is essential to do so.

COVERAGE

McAfee protects against this threat in all its products, including personal antivirus, endpoint and gateway.

The names that it can have are:

• Ransom-Maze!<hash>

YARA RULE

rule maze_unpacked {

   meta:

      description = “Rule to detect unpacked Maze samples”

      author = “Marc Rivero | McAfee ATR Team”

    

   strings:

      $opcode_sequence = { 5589e583ec208b450c8b4d08c745fc00 }

 

                  $opcode_sequence_2 = { 5589e553575683e4f883ec28c7042400 }

 

                  $opcode_sequence_3 = { 5589e55dc3662e0f1f84000000000090 }

 

                  $opcode_sequence_4 = { 5589e553575683e4f081ec600200008b }

 

                  $opcode_sequence_5 = { 5589e553575683e4f081ecc00000000f }

 

                  $opcode_sequence_6 = { 5589e583ec208b45108b4d0c8b550883 }

 

                  $opcode_sequence_7 = { 5589e5575683ec388b45108b4d0c8b55 }

 

                  $opcode_sequence_8 = { 5589e5575683e4f883ec088b45088b48 }

 

                  $opcode_sequence_9 = { 558b6c241468997a41000f84bdc50000 }

 

                  $opcode_sequence_10 = { 5589e553575683e4f883ec588b5d088b }

 

                  $opcode_sequence_11 = { 5589e553575683e4f083ec408a42048b }

 

                  $opcode_sequence_12 = { 5589e583ec188b4508837d08008945fc }

 

                  $opcode_sequence_13 = { 5589e553575683e4f8b8d05b0000687f }

 

                  $opcode_sequence_14 = { 5589e5508b450831c98945fc89c883c4 }

 

                  $opcode_sequence_15 = { 5589e553575683e4f883ec708b5d0889 }

                 

                  $opcode_sequence_16 = { 5589e583ec308b45088b4d08894df883 }

 

                  $opcode_sequence_17 = { 5589e553575683e4f881ec18030000f2 }

 

                  $opcode_sequence_18 = { 5589e583ec188b45088b4d08894df48b }

 

                  $opcode_sequence_19 = { 5589e583ec2056be74c14400566a0068 }

 

                  $opcode_sequence_20 = { 5589e553575683e4f081ec900000008b }

 

                  $opcode_sequence_21 = { 5589e583e4f083ec208b4d108b450c0f }

 

                  $opcode_sequence_22 = { 5589e55383e4f883ec108b4d0c8b4508 }

 

                  $opcode_sequence_23 = { 558b8e150409133f03fd08f81b0c4f22 }

 

                  $opcode_sequence_24 = { 5589e553575683e4f883ec7031f68379 }

 

                  $opcode_sequence_25 = { 5589e553575683e4f881ec3001000089 }

 

                  $opcode_sequence_26 = { 5589e553575683e4f881ece00000000f }

 

                  $opcode_sequence_27 = { 558b589608361d1943a57d0ba6492beb }

 

                  $opcode_sequence_28 = { 5589e553575683e4f883ec1089ce6a00 }

 

                  $opcode_sequence_29 = { 5589e5575683e4f883ec688b75088b7d }

 

                  $opcode_sequence_30 = { 5589e553575683e4f883ec386a006a00 }

 

                  $opcode_sequence_31 = { 558b7c240868dca8440057683d484300 }

 

                  $opcode_sequence_32 = { 5589e55683e4f881ec2801000089ce8d }

 

                  $opcode_sequence_33 = { 5589e583ec188b450831c98b5508c704 }

 

                  $opcode_sequence_34 = { 5589e583ec308b450c8b4d088b55088b }

 

                  $opcode_sequence_35 = { 5589e583ec348b450831c983c1188b55 }

 

                  $opcode_sequence_36 = { 5589e553575683e4f881ec78040000f2 }

 

                  $opcode_sequence_37 = { 5589e583ec108b4508837d08008945f8 }

 

                  $opcode_sequence_38 = { 5589e583ec348b4508837d08008945dc }

 

                  $opcode_sequence_39 = { 5589e55683ec548b45088b4d08894df0 }

 

                  $opcode_sequence_40 = { 558bec5de9a48efeffe9ef8efeffcccc }

 

                  $opcode_sequence_41 = { 5589e553575683ec108b45108b4d0c8b }

 

                  $opcode_sequence_42 = { 5589e5575683ec348b4508c745f40100 }

 

                  $opcode_sequence_43 = { 558bec8325a0c345000083ec1c5333db }

 

                  $opcode_sequence_44 = { 5589e553575683e4f083ec208b750c0f }

 

                  $opcode_sequence_45 = { 5589e583ec348b450c8b4d088b55088b }

 

                  $opcode_sequence_46 = { 558b6fd8d843ef516154e2526781aecd }

 

   condition:

 

      ( uint16(0) == 0x5a4d) and 38 of them

}

IOCs

Network

Domain          mazedecrypt.top

IP                     91.218.114.11

IP                     91.218.114.25

IP                     91.218.114.26

IP                     91.218.114.31

IP                     91.218.114.32

IP                     91.218.114.37

IP                     91.218.114.38

IP                     91.218.114.4

IP                     91.218.114.77

IP                     91.218.114.79

MITRE ATT&CK COVERAGE

• CommonlyUsedPort
• StandardApplicationLayerProtocol
• SecuritySoftwareDiscovery
• SystemTimeDiscovery
• CommandLineInterface
• DataEncrypted
• DataEncryptedForImpact
• Query registry
• Hooking

[1] https://twitter.com/jeromesegura/status/1133767240686288896

[2] https://www.bleepingcomputer.com/news/security/maze-ransomware-demands-6-million-ransom-from-southwire/

[3] https://www.bleepingcomputer.com/news/security/nemty-ransomware-to-start-leaking-non-paying-victims-data/

[4] https://twitter.com/McAfee_Labs/status/1206651980086685696

[5] https://www.bleepingcomputer.com/news/security/new-threat-actor-impersonates-govt-agencies-to-deliver-malware/

[6] https://securityintelligence.com/news/spelevo-ek-exploits-flash-player-vulnerability-to-deliver-maze-ransomware/

[7] https://github.com/revsic/AntiDebugging

[8] https://ss64.com/locale.html

[9] https://twitter.com/malwrhunterteam/status/1222253947332841472

[10] https://twitter.com/luca_nagy_/status/1222819371644522500