Here’s Wooden Camera’s new Elite Accessory System for the Canon EOS C400 (above and detailed view below).
It will be released in September, when the camera will ship as well.
Elite Accessory System for C400
The Core Accessory System for the Canon EOS C400
The Core System includes the essentials for the C400 camera. The Elite System adds Wooden Camera’s Top Handle, Baseplate, and rods.
Let’s look at the Core Accessory System:
Battery Slide Pro (in Gold Mount or V-Mount): Powers the C400 via a 4-pin XLR connector. Attaches directly to the back of the camera without rods. You can hot-swap batteries when the C400’s onboard BP battery is attached as well.
Core Accessory System for C400
Base Plate System: The Arca Swiss style Riser Plate and Base Plate are centered on the lens mount and accept 15mm rods.
Riser plate with threaded lens mount adapter support rod
Top Plate System: Consists of a 3-piece Top Plate (center plus two symmetrical left/right plates) and a front-facing Dual Rod Clamp. The Center Top Plate attaches to the center mounting points on the camera body with a 3/16″ hex wrench, adding multiple ⅜-16 and ¼-20 mounting points for handles or accessories. The Left and Right Top Plates are symmetrical and can be used on either side and include forward-facing ⅜-16 mounting points. The Dual Rod Bracket can be used with the full top plate system to accept rods.
Top plate system
Top Handle Cheese Plate: Attaches to the camera (you can leave the C400 handle in place) with ¼-20 screws. Provides multiple ¼-20 and ⅜-16 mounting points on the top and side. A forward-facing ⅜-16 mounting lets you mount bolt-on rods or other front-mounted accessories. The custom cutout design allows access to the EOS C400 hot shoe for attaching a microphone.
NATO Side Rail: Mounts to the Top Plate near the rear of the camera without touching the EOS C400’s handle, providing additional ¼-20 and ⅜-16 mounting points. Attaches to the Top Plate with a 3/16″ hex wrench and has safety push pins for NATO accessories.
Side rail
Bolt-On Canon EVF Adaptor: Attach the C400 EVF Adapter directly to the Ultra Handle Front Riser or the front of the Ultra Handle Extension when using the Ultra Handle 5″ Kit. Provides two ⅜-16 mounting points in addition to the Canon EVF mount.
EVF Adapter
Also recommended:
RF to PL Mount Adaptor, Ultra Handles, etc.
