BROMPTON T LINE RECALL

Below is information regarding the Brompton T Line and a recall we have announced in cooperation with the U.S. Consumer Product Safety Commission.

What is the issue?

The handlebar support and fork can become misaligned under specific circumstances, posing a crash hazard. We have received 15 reports relating to this issue. There have been no reports of injury.

If your bike falls within the above range, please check that the bike has not already been updated using the following Serial Number checker:

We have increased the torque value applied to the four steerer clamp hinge bolts during our manufacturing process, ensuring that misalignment cannot occur. This means that all bikes manufactured from 21st June 2024, have had the increased torque value applied and are not affected. These can be identified by having a serial number of 2406070001 or greater. If your bike is in this group, no further action is required.

How do you get it fixed?

If your bike is affected, it will require a repair to increase the torque to 7Nm on the four steerer clamp hinge bolts.

This can be performed for free through your local Brompton dealer, or at home, using a calibrated torque wrench. If it is inconvenient to take your bike to a dealer, you can perform the work at home if you have a calibrated torque wrench.

Compensation 

While this is a relative quick and simple job, we appreciate that this could cause some inconvenience to you. As a result, we will provide a $10 dollar credit to our website to any customer who performs this job at home and registers this job as being completed through the following online form.

Alternatively, any customer can visit their local authorised Brompton retailer to have this work performed at no cost.

Further information

If you would like more information, please direct them to contact us at +1-833-507-7975 or via our contact us page.