Abstract
Haptic-based paradigms for human motor skill training which include virtual fixture, record-play method, shared control scheme and haptic disturbance have been proposed and widely used for applications like surgery, assembly, rehabilitation, motor skill and so on. However, no haptic-based training scheme applies to all types of human motor skills that new ideas and new approaches should be explored for some special training tasks. For example, tank gunners have to be rigorously trained to be able to complete the most accurate manipulation in the shortest possible time. Accuracy and operating speed are both critical for them to grasp the skill; therefore, tank gunnery is defined as a type of high precision and high speed human motor skill. In this paper, a hybrid spring-damper model which fuses haptic fixture and record-play is presented to simultaneously train accuracy and operating speed. The training approach is suitable for novices at all levels since force feedback is decomposed into two components: one for training accuracy, the other for training speed. The virtual envelope depicting is chosen as the training task for novices to validate the effectiveness of the proposed haptic-based scheme in high precision and high speed skill training. Experimental results indicate that force feedback generated based on the hybrid model can benefit novices in fast improving performances on tank gunnery.
Similar content being viewed by others
References
Abbott JJ, Marayong P, Okamura AM (2007) Haptic virtual fixtures for robot-assisted manipulation. Proc of 12th Int Symp Robot Res 28:49–64
Adams JR, Clowden D, Hannaford B (2001) Virtual training for a manual assembly task. Haptics-e 2(2): 1–7
Basdogan C, De S, Kim J, Muniyandi M, Kim H, Srinivasan MA (2004) Haptics in minimally invasive surgical simulation and training. IEEE Comput Graph Appl 24(2):56–64
Basdogan C, Ho C, Srinivasan MA (2001) Virtual environments for medical training: graphical and haptic simulation of laparoscopic common bile duct exploration. IEEE Trans Mechatron 6(3):267–285
Bayart B, Pocheville A, Kheddar A (2005) An adaptive haptic guidance software module for I-TOUCH: example through a handwriting teaching simulation and a 3D maze. Proc Haptic Audio Vis Environ Appl: 51–56
Dang T, Annaswamy TM, Srinivasan MA (2001) Development and evaluation of an epidural injection simulator with force feedback for medical training. Proc. Med Meets Virtual Reality 81:97–102
Feygin D, Keehner M, Tendick F (2002) Haptic guidance: experimental evaluation of a haptic training method for a perceptual motor skill. Proc. 10th Symposium on Haptic Interfaces for Virtual Environments and Tele-operator Systems 40–47
Fitts PM, Posner MI (1967) Human performance. Brooks/Cole, Belmont
Gillespie RB, O’Modhrain M, Tang P, Zaretzky D, Pham C (1998) The virtual teacher. ASME IMECE-DSC 64:171–178
Grindlay G (2008) Haptic guidance benefits musical motor learning. Proc. of Symp Haptic Interfaces Virtual Environ Teleoperator Syst: 397–404
Gupta A, O’Malley MK (2006) Design of a haptic arm exoskeleton for training and rehabilitation. IEEE/ASME Trans Mechatron 11(3):280–289
Henmi K, Yoshikawa T (1998) Virtual lesson and its application to virtual calligraphy system. Proceedings of the IEEE Int. Conf. Robot Autom: 1275–1280
Lee J, Choi S (2010) Effects of haptic guidance and disturbance on motor learning: potential advantage of haptic disturbance. IEEE Haptics Symp: 335–342
Leifer L (1981) Rehabilitation robots. Robotics Age 3(3):4–15
Li Y, Huegel JC, Patoglu V, O’Malley MK (2009) Progressive shared control for training in virtual environments. Third Joint Eurohaptics Conf Symp Haptic Interfaces Virtual Environ Teleoperator Syst: 332–337
Li M, Okamura AM, (2003) Recognition of operator motions for real-time assistance using virtual fixtures. Proc. 11th Symposium on Haptic Interfaces for Virtual Environments and Tele-operator Systems: 125–131
Lu K, Liu G, Zhang Y, Guo W, Zhou M (2010) Two-mode system for tank gunnery skill training based on haptic interaction. IEEE Int Conf Mechatronics Autom: 1449–1453
Marayong P, Okamura AM (2004) Speed-accuracy characteristics of human-machine cooperative manipulation using virtual fixtures with variable admittance. Hum Factors 46(3):518–532
Méndez E, Yoshida S, Noma H, Yanagida Y, Masaki S, Hosaka K (2005) A haptic-assisted guidance system for navigating volumetric data sets. Proc First Joint Euro Haptics Conf Symp Haptic Interfaces Virtual Environ Teleoperator Syst: 531–534
Moore CA et al (2003) Cobot implementation of virtual paths and 3-D virtual surfaces. IEEE Trans Robot Autom 19(2):347–351
O’Malley MK, Gupta A, Gen M, Li Y (2006) Shared control in haptic systems for performance enhancement and training. J Dyn Syst Meas Control 12:75–85
Prada R, Payandeh S (2001) A study on design and analysis of virtual fixtures for cutting in training environments. Proc First Joint Euro Haptics Conf Symp Haptic Interfaces Virtual Environ Teleoperator Syst: 1419–1420
Rosenberg L (1993) Virtual fixtures: perceptual tools for teler-obotic manipulation. Virtual Real Ann Int’l Symp: 76–82
Solis J, Avizzano CA, Bergamasco M (2003) Validating a skill transfer system based on reactive robots technology. Proc 2003 IEEE Int Workshop Robot Hum Interact Commun: 175–180
Srimathveeravalli G, Thenkurussi K, (2005) Motor skill training assistance using haptic attributes. First Joint Euro Haptics Conf Symp Haptic Interfaces Virtual Environ Teleoperator Syst: 452–457
Yu W, Dubey R, Pernalete N (2004) Telemanipulation enhancement through user’s motion intention recognition and fixture assistance. Proc 2004 IEEE Int Robot Sys 3:2235–2240
Zhou M, Liu G, Lu K (2012) A novel 2 DOF haptic device for gunnery training. Adv Mater Res 346:241–246
Acknowledgment
This research received support of National Science Foundation of China under grant No. 60803070.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, G., Zhang, Y., Lu, K. et al. A hybrid haptic guidance model for tank gunners in high precision and high speed motor skill training. Multimed Tools Appl 69, 1111–1130 (2014). https://doi.org/10.1007/s11042-012-1179-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11042-012-1179-9