Fluid flow characterization of liquid–liquid mixing in mixer-settler | Engineering with Computers Skip to main content
Springer Nature Link
Log in

Fluid flow characterization of liquid–liquid mixing in mixer-settler

  • Original Article
  • Published:
Engineering with Computers Aims and scope Submit manuscript

Abstract

Agitation in a mixer-settler is one of the most common operations, yet presents one of the greatest challenges in the area of computer simulation. Mixer-settlers typically contain an impeller mounted on a shaft, and optionally can contain baffles. The hydrodynamic characteristics of mixer-settlers have been studied in the present study. The effect of different geometrical parameters on the efficiency characteristics of the system has been investigated. The effects of different width of impellers, impeller speed, inlet velocity, impeller diameter, etc. have been studied. Computational fluid dynamics (CFD) model has been developed to predict the efficiency characteristics. The model has been validated with the help of experimental data for different velocity outlets used in the work. This work has enabled developing efficiency that can produce higher condition than those reported in previous literature. From the CFD simulations results, optimum mixer-settler geometry has been proposed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
¥17,985 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Japan)

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Chiu YN, Naser J, Ngian KF, Pratt KC (2007) Investigation and improvement of ejector refrigeration system using computational fluid dynamics technique. Energy Convers Manag 48:2556–2564

    Article  Google Scholar 

  2. Takahashi K, Abdel A, Tawab SA, Yajima T, Kawaizumi F (2002) Extraction of rare earth metals with a multistage mixer-settler extraction column. Chem Eng Sci 57:469–478

    Article  Google Scholar 

  3. Gomes EF, Guimara˜es MML, Ribeiro LM (2007) Numerical modelling of a gravity settler in dynamic conditions. Adv Eng Softw 38:810–817

    Article  Google Scholar 

  4. Bakker A, LaRoche RD, Marshall EM (1998) Laminar flow in static mixers with helical elements, “The Online CFM Book” at http://www.bakker.org/cfm

  5. Mostaedi MT, Safdari J, Moosavian MA, Maragheh MG (2009) Flooding characteristics in a Hanson mixer settler extraction column. Chem Eng Process 48:1249–1254

    Article  Google Scholar 

  6. Vakili MH, Esfahany M (2009) CFD analysis of turbulence in a baffled stirred tank, a three-compartment model. Chem Eng Sci 64:351–362

    Article  Google Scholar 

  7. Reeve RN, Godfry JC (2002) Phase inversion during liquid–liquid mixing in continuous flow, pump-mix, agitated tanks, Institution of Chemical Engineers, Trans IChemE, vol 80, part A

  8. Zughbi HD, Rakib MA (2004) Mixing in a fluid jet agitated tank: efects of jet angle and elevation and number of jets. Chem Eng Sci 59:829–842

    Article  Google Scholar 

  9. Srilatha C, Mundada TP, Patwardhan AW (2010) Scale-up of pump-mix mixers using CFD. Chem Eng Res Des 88:10–22

    Article  Google Scholar 

  10. Meroney RN, Colorado PE (2009) CFD simulation of mechanical draft tube mixing in anaerobic digester tanks. Water Res 43:1040–1050

    Article  Google Scholar 

  11. Pianthong K, Seehanam W, Behnia M, Sriveerakul T (2007) Investigation and improvement of ejector refrigeration system using computational fluid dynamics technique. Energy Convers Manag 48:2556–2564

    Article  Google Scholar 

  12. Marshall EM, Bakker A (2003) Computational fluid mixing, Fluent Inc. Lebanon. http://www.fluent.com

  13. Bakker A, Fasano JB, Myers KJ (1998) Effects of flow pattern on the solids distribution in a stirred tank, “The Online CFM Book” at http://www.bakker.org/cfm

  14. Bakker A, LaRoche RD (1998) Modeling of the turbulent flow in HEV static mixers, “The Online CFM Book” at http://www.bakker.org/cfm

  15. Binxin Wu (2009) CFD simulation of mixing in egg-shaped anaerobic digesters, water research 1–13

  16. Bakker A, Fasano JB (1998) Turbulent mixing and chemical reaction in stirred tanks, “The Online CFM Book” at http://www.bakker.org/cfm

  17. Murthy BN, Joshi JB (2008) Assessment of standard k–ε, RSM and LES turbulence models in a baffled stirred vessel agitated by various impeller designs. Chem Eng Sci 63:5468–5495

    Article  Google Scholar 

  18. Singh KK, Mahajani SM, Shenoy KT, Patwardhan AW, Ghosh SK (2007) CFD modeling of pilot-scale pump-mixer: single-phase head and power characteristics. Chem Eng Sci 62:1308–1322

    Article  Google Scholar 

  19. Singh KK, Shenoy KT, Mahendra AK, Ghosh SK (2004) Artificial neural network based modelling of head and power characteristics of pump-mixer. Chem Eng Sci 59:2937–2945

    Article  Google Scholar 

  20. Srilatha C, Savant AR, Patwardhan AW, Ghosh SK (2008) Head–flow characteristics of pump-mix mixers. Chem Eng Process 47:1678–1692

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Materials and Energy Research Center (MERC), Tehran, Iran

    Mohsen Ostad Shabani & Mehdi Alizadeh

  2. School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran

    Ali Mazahery

Authors
  1. Mohsen Ostad Shabani
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Mehdi Alizadeh
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ali Mazahery
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mohsen Ostad Shabani.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Shabani, M.O., Alizadeh, M. & Mazahery, A. Fluid flow characterization of liquid–liquid mixing in mixer-settler. Engineering with Computers 27, 373–379 (2011). https://doi.org/10.1007/s00366-011-0209-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00366-011-0209-y

Keywords

Search

Navigation