AIMEXR uses the same state-of-the-art heads as NXTR. By expanding the range of parts that can be supported, they contribute to line balancing and flexible production without drops in production rates even when a different set of parts is used in the next production.

The possible placement area can be expanded up to the maximum panel size of 1,068 x 610 mm. The machine supports a wide range of applications, from LED placement and automotive panels, to the large panels required for communication infrastructure.

With the large capacity part supply units the machine can hold up to 130 different part types. Shared setups that utilize the large quantity of loaded parts reduce the changeover frequency and operator work loads.

Program changes due to sudden production changes and data editing for vision processing errors during production can be supported immediately on the machine. On-machine functions that support editing programs reduce the lead time to ramping up production.

Placements can be performed with a high accuracy of ±25 µm at all times; there are no constraints for the head type or the part to be placed. Additionally, the machine controls the push-in amount during placement and places with the appropriate pressure.

Reliable placement is attained by detecting and adjusting for the panel warpage and individual part differences using advanced functions. Maintain productivity and support even large panels for which it is easy for the warpage to be large (up to 7 mm).

The installed IPS system can cater to a wide range of checks, from part pickup stance to parts remaining on nozzles, as well as upside-down checks for minimold parts. It prevents placement defects attributed to packaging, nozzles, and parts.

Placement defects caused by operation errors and defective parts are prevented by checking the electrical properties of chip parts with LCR checks and by checking the leads and bumps on IC parts with coplanarity checks. (Option)

AIMEXR saves log and image data automatically. Resolutions can be reached quickly whenever problems occur by making use of this information.
If there is a network problem, production can be continued using the program information stored inside the machine. This yet-to-be-released feature will make it possible to avoid sudden stops at the production line.

Nozzles, feeders, and also heads are applicable for offline maintenance. Using automation units ensures reliable maintenance without requiring any skills. Linking these units with Nexim improves maintenance management.

Production method: Dual lane production*
Supported panel size: 48 x 48mm to 1,068 x 280mm
Supported part size: 0201 (008004") to 7 x 7 mm, height: 6.5 mm
* Under development

Production method: Single lane production
Supported panel size: 48 x 48mm to 1,068 x 610mm
Supported part size: 0402 (01005") to 180 x 35 mm*, height: 38.1 mm
* Maximum part sizes include 135 x 120, 175 x 50, and 167 x 74 mm in addition to the above.