MU-4000V
A trunnion table for high accuracy, ease of use, and compactness
The MU-4000V has a very rigid roller gear cam suited to high-speed drive on the trunnion table B-axis, and a direct drive motor that produces high torque even at low speeds on the C-axis. This makes it possible to achieve both high-speed and high-accuracy machining.
High-speed
B axis: 50min-1
C axis:
120min--1(Standard)
1,200min-1(Optional)[turning mode]
Indexing accuracy*
B-axis indexing accuracy/repeatability: ±1.78 sec/±0.50 sec
C-axis indexing accuracy/repeatability: ±2.26 sec/±0.12 sec
Note: The data shown are actual data but do not represent guaranteed accuracies.
Easy-to-use 5-axis machine from well-considered design
Large working range for applicable workpieces
The machining area is large enough to handle workpieces with a maximum diameter of ø500 mm and maximum height of 400 mm. Tools can also reach the end of workpieces even with the table inclined at various angles, making 5-axis machining possible over a wide range.
Tools can be changed even with the trunnion in a swung position, contributing to reduced cycle times and improved machining accuracies.
Large machining area
Swing range B axis: +90º to −120°, C-axis: 360º (infinite rotation)
Max workpiece weight: 300 kg
Max workpiece size: ø500 × 400 mm height
Max workpiece diameter with large X-axis travel (ø500) peripheral cutting is possible
Even the largest workpieces are machined with capacity to spare
Visibility of the cutting edge at the time of cutting also excellent
High cutting capability with high output motors
A motor with maximum torque of 199 N-m is used on the spindle. Machining time can be shortened with high-efficiency machining. The use of a high torque motor on the turning spindle also gives high turning capacity.
Standard spindle
Speed: 15,000min-1(With turning specs: 12,000min-1)
Max output: 22/18.5kW (10 min/cont)
Max torque: 199/146N・m (5 min/cont)
Speed: 15,000min-1(With turning specs: 12,000min-1)
Max output: 22/18.5kW (10 min/cont)
Max torque: 199/146N・m (5 min/cont)
Turning spindle (Optional)
Table (turning spindle) spindle speed: 1,200min-1
Max output: 15/10kW (15 min/cont)
Max torque: 477/318N・m (15 min/cont)
Table (turning spindle) spindle speed: 1,200min-1
Max output: 15/10kW (15 min/cont)
Max torque: 477/318N・m (15 min/cont)
Highlighted Specs
| Item | Unit | MU-4000V |
|---|---|---|
| Table size | mm(in) | ø400 (ø15.75) |
| Spindle speed | min-1 | 15,000 |
| Tool storage | tools | 32 |
| Motor | kW(hp) | 22/18.5 (10 min/cont) (30/25) |
| Machine size (W × D × H) | mm(in) | 2,399 × 3,248 × 2,950 (94.45 × 127.87 × 116.14) |
| Spec extension | L |
