意味 | 例文 (10件) |
粘性モデルの英語
追加できません
(登録数上限)
英訳・英語 viscosity model
「粘性モデル」の部分一致の例文検索結果
該当件数 : 10件
次に、粘性パラメータの値を代表モデルに与え、周期的な変形を代表モデルに与えることによりシミュレーションを行う。例文帳に追加
Then, the value of a viscosity parameter is applied to a representative model, and cyclic deformation is applied to the representative model, so that simulation is executed. - 特許庁
まず、変形中の前記モデルに作用する第1の物理量と第2の物理量を定め、さらに、代表モデルに粘性特性を表す粘性パラメータの値を定める。例文帳に追加
First physical quantity and second physical quantity acting on a model during deformation are decided, and the value of a viscosity parameter showing viscous characteristics is decided to a representative model. - 特許庁
そこで、密度ρと粘性摩擦係数cとを温度の関数として予めモデル化しておけば、各推定値に対応した制御が可能になる。例文帳に追加
Thereby, when density ρ and a viscosity friction coeeficient c are previously modeled as functions of the temperature, it is possible to carry out control in correspondence with each of estimated values. - 特許庁
逆関数モデル33では、推定摩擦Cfは、推定粘性摩擦と推定クーロン摩擦とを区別して計算する。例文帳に追加
In the inverse function model 33, the estimated friction Cf calculates separately an estimated viscous friction and an estimated Coulomb friction. - 特許庁
逆特性モデル300には、負荷であるテーブル02のイナーシャ、粘性、ばね剛性を考慮しつつ、ばね粘性を無視すると共に、モータ12のイナーシャや粘性を考慮して、「ひずみ」等を補償する補償制御用伝達関数が設定されている。例文帳に追加
A reverse characteristic model 300 includes a compensation control transmission function for compensating "distortion" or the like while considering the inertia, viscosity and spring rigidity of the table 02 as a load, ignoring the spring viscosity and considering the inertia and viscosity of the motor 12. - 特許庁
所定モデル式は、空気の粘性変化の影響を補正するための粘性補正係数TAMYUFを含み、粘性補正係数TAMYUFは、吸気温に応じて算出される粘性変化率TAMYUと、スロットル弁開度THに応じて算出される重み係数TAMYURATIOとを用いて算出される。例文帳に追加
The predetermined model formula includes a viscosity correcting coefficient TAMYUF for correcting the influences of a viscosity change of air, and the viscosity correcting coefficient TAMYUF is calculated using a viscosity change rate TAMYU calculated depending on the temperature of intake air and a weighting factor TAMYURATIO calculated depending on the throttle valve opening TH. - 特許庁
さらに、移流系予測モデル適用部160が、渦度に基づいてナビエ・ストークス方程式の粘性係数を決定することにより、渦パターンの予測精度の向上を可能とする。例文帳に追加
Moreover, an advection system prediction model application part 160 determines a viscosity coefficient of Navier-Stokes equation on the basis of the vorticity, so that prediction precision of a whirl pattern can be improved. - 特許庁
-
履歴機能過去に調べた
単語を確認! -
語彙力診断診断回数が
増える! -
マイ単語帳便利な
学習機能付き! -
マイ例文帳文章で
単語を理解!
「粘性モデル」の部分一致の例文検索結果
該当件数 : 10件
この結果、2慣性系機械モデルの総慣性モーメント値(J_M+J_L)、連結軸3のばね定数K_F、及び粘性摩擦係数C_F等を解析的に導く。例文帳に追加
The total inertial moment (J_M+J_L) of the dual inertial system mechanical model, a spring modulus K_F of the coupling shaft 3 and a viscous friction coefficient C_F are analytically derived. - 特許庁
鋼の連続鋳造において高粘性の連鋳パウダーを用いた鋳造や高鋳造速度での鋳造を可能にする鋳造条件を動的モデル式により求め、これを用いた鋼の連続鋳造方法を提供する。例文帳に追加
To obtain casting conditions achieving casting using continuous casting powder with a high viscosity or casting at a high casting rate in the continuous casting of a steel by dynamic model equations, and to provide a continuous casting method for a steel using the same. - 特許庁
鋼の連続鋳造において高粘性の連鋳パウダーを用いた鋳造や高鋳造速度での鋳造を可能にする鋳造条件を動的モデル式により求め、これを用いた鋼の連続鋳造方法を提供する。例文帳に追加
To provide a method for continuously casting steel by which a casting condition realizing casting using highly viscous continuous casting powder or at high casting speed is obtained from a dynamic model expression in continuous casting of steel and the steel is continuously cast using the obtained condition. - 特許庁
|
意味 | 例文 (10件) |
|
ピン留めアイコンをクリックすると単語とその意味を画面の右側に残しておくことができます。 |
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |
「粘性モデル」のお隣キーワード |
weblioのその他のサービス
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |