乐胖代购免代理版

1. Introduction

Tests

The test coverage information in this specification covers wpt/css/css-text/ and subdirectories, as well as those tests in wpt/css/CSS2/ and subdirectories that relate to this specification.

This module describes the typesetting controls of CSS; that is, the features of CSS that control the translation of source text to formatted, line-wrapped text. Various CSS properties provide control over case transformation, white space collapsing, text wrapping, line breaking rules and hyphenation, alignment and justification, spacing, and indentation.

Note: Font selection is covered in the CSS Fonts Module. [CSS-FONTS-3]

Features for decorating text, such as underlines, emphasis marks, and shadows, (previously part of this module) are covered in the CSS Text Decoration Module. [CSS-TEXT-DECOR-3]

Bidirectional and vertical text are addressed in the CSS Writing Modes Module. [CSS-WRITING-MODES-4].

Further information about the typesetting requirements of various languages and writing systems around the world can be found in the Internationalization Working Group’s Language Enablement Index. [TYPOGRAPHY]

Tests

The following tests are crash tests that relate to general usage of the features described in this specification but are not tied to any particular normative statement.

1.1. Module Interactions

Tests

Tests not needed for this section.

This module, together with the CSS Text Decoration Module, replaces and extends the text-level features defined in Cascading Style Sheets Level 2 chapter 16. [CSS-TEXT-DECOR-3] [CSS2]

In addition to the terms defined below, other terminology and concepts used in this specification are defined in Cascading Style Sheets Level 2 and the CSS Writing Modes Module. [CSS2] and [CSS-WRITING-MODES-4].

1.2. Value Definitions

Tests

Tests not really needed for this section; could possibly test that css-wide keywords apply to every property.

This specification follows the CSS property definition conventions from [CSS2] using the value definition syntax from [CSS-VALUES-3]. Value types not defined in this specification are defined in CSS Values & Units [CSS-VALUES-3]. Combination with other CSS modules may expand the definitions of these value types.

In addition to the property-specific values listed in their definitions, all properties defined in this specification also accept the CSS-wide keywords as their property value. For readability they have not been repeated explicitly.

1.3. Languages and Typesetting

Tests

Tests not needed for this section: these are definitions, they get tested through their application, not by themselves.

Authors should accurately language-tag their content for the best typographic behavior.

Many typographic effects vary by linguistic context. Language and writing system conventions can affect line breaking, hyphenation, justification, glyph selection, and many other typographic effects. In CSS, language-specific typographic tailorings are only applied when the content language is known (declared). Therefore, higher quality typography requires authors to communicate to the UA the correct linguistic context of the text in the document.

The content language of an element is the (human) language the element is declared to be in, according to the rules of the document language. Note that it is possible for the content language of an element to be unknown—e.g. untagged content, or content in a document language that does not have a language-tagging facility, is considered to have an unknown content language.

Note: Authors can declare the content language using the global lang attribute in HTML or the universal xml:lang attribute in XML. See the rules for determining the content language of an HTML element in HTML, and the rules for determining the content language of an XML element in XML 1.0. [HTML] [XML10]

The content language an element is declared to be in also identifies the specific written form of that language used in that element, known as the content writing system. Depending on the document language’s facilities for identifying the content language, this information can be explicit or implied. See the normative Appendix F: Identifying the Content Writing System.

Note: Some languages have more than one writing system tradition; in other cases a language can be transliterated into a foreign writing system. Authors should subtag such cases so that the UA can adapt appropriately.

For example, Korean (ko) can be written in Hangul (-Hang), Hanja (-Hani), or a combination (-Kore). Historical documents written solely in Hanja do not use word spaces and are formatted more like modern Chinese than modern Korean. In other words, for typographic purposes ko-Hani behaves more like zh-Hant than ko (ko-Kore).

As another example Japanese (ja) is typically written in a combination (-Japn) of Hiragana (-Hira), Katakana (-Kana), and Kanji (-Hani). However, it can also be “romanized” into Latin (-Latn) for special purposes like language-learning textbooks, in which case it should be formatted more like English than Japanese.

As a third example contemporary Mongolian is written in two scripts: Cyrillic (-Cyrl, officially used in Mongolia) and Mongolian (-Mong, more common in Inner Mongolia, part of China). These have very different formatting requirements, with Cyrillic behaving similar to Latin and Greek, and Mongolian deriving from both Arabic and Chinese writing conventions.

1.4. Characters and Letters

Tests

For the most part, tests not really needed for this section: these are definitions, they get tested through their applications, by themselves. The few testable assertions that are made have coverage.

Possible additions:

turning the content of example 1 into tests (first, check that it’s not already done).

The basic unit of typesetting is the character. However, because writing systems are not always as simple as the basic English alphabet, what a character actually is depends on the context in which the term is used. For example, in Hangul (the Korean writing system), each square representation of a syllable (e.g. 한=Han) can be considered a character. However, the square symbol is really composed of multiple letters each representing a phoneme (e.g. ㅎ=h, ㅏ=a, ㄴ=n) and these also could each be considered a character.

A basic unit of computer text encoding, for any given encoding, is also called a character, and depending on the encoding, a single encoding character might correspond to the entire pre-composed syllabic character (e.g. 한), to the individual phonemic character (e.g. ㅎ), or to smaller units such as a base letterform (e.g. ㅇ) and any combining marks that vary it (e.g. extra strokes that represent aspiration).

In turn, a single encoding character can be represented in the data stream as one or more bytes; and in programming environments one byte is sometimes also called a character.

Therefore the term character is fairly ambiguous where technical precision is required.

For text layout, we will refer to the typographic character unit as the basic unit of text. Even within the realm of text layout, the relevant character unit depends on the operation. For example, line-breaking and letter-spacing will segment a sequence of Thai characters that include U+0E33 ำ THAI CHARACTER SARA AM differently; or the behavior of a conjunct consonant in a script such as Devanagari may depend on the font in use. So the typographic character represents a unit of the writing system—such as a Latin alphabetic letter (including its diacritics), Hangul syllable, Chinese ideographic character, Myanmar syllable cluster—that is indivisible with respect to a particular typographic operation (line-breaking, first-letter effects, tracking, justification, vertical arrangement, etc.).

Tests

Unicode Standard Annex #29: Text Segmentation defines a unit called the grapheme cluster which approximates the typographic character. [UAX29] A UA must use the extended grapheme cluster (not legacy grapheme cluster), as defined in UAX29, as the basis for its typographic character unit. However, the UA should tailor the definitions as required by typographic tradition since the default rules are not always appropriate or ideal—and is expected to tailor them differently depending on the operation as needed.

Tests

Note: The rules for such tailorings are out of scope for CSS.

The following are some examples of typographic character unit tailorings required by standard typesetting practice:

In some scripts such as Myanmar or Devanagari, the typographic character unit for both justification and line-breaking is an entire syllable, which can include more than one Unicode grapheme cluster. [UAX29]
In other scripts such as Thai or Lao, even though for line-breaking the typographic character matches Unicode’s default grapheme clusters, for letter-spacing the relevant unit is less than a Unicode grapheme cluster, and may require decomposition or other substitutions before spacing can be inserted. [UAX29]
For instance, to properly letter-space the Thai word คำ (U+0E04 + U+0E33), the U+0E33 needs to be decomposed into U+0E4D + U+0E32, and then the extra letter-space inserted before the U+0E32: คํ า.

A slightly more complex example is น้ำ (U+0E19 + U+0E49 + U+0E33). In this case, normal Thai shaping will first decompose the U+0E33 into U+0E4D + U+0E32 and then swap the U+0E4D with the U+0E49, giving U+0E19 + U+0E4D + U+0E49 + U+0E32. As before the extra letter-space is then inserted before the U+0E32: นํ้ า.
Vertical typesetting can also require tailoring. For example, when typesetting upright text, Tibetan tsek and shad marks are kept with the preceding grapheme cluster, rather than treated as an independent typographic character unit. [CSS-WRITING-MODES-4]

A typographic letter unit (or letter for the purpose of this specification) is a typographic character unit belonging to one of the Letter or Number general categories. See Appendix E: Characters and Properties for how to determine the Unicode properties of a typographic character unit.

The rendering characteristics of a typographic character unit divided by an element boundary is undefined. Ideally each component should be rendered according to the formatting requirements of its respective element’s properties while maintaining correct shaping and positioning of the typographic character unit as a whole. However, depending on the nature of the formatting differences between its parts and the capabilities of the font technology in use, this is not always possible. Therefore such a typographic character unit may be rendered as belonging to either side of the boundary, or as some approximation of belonging to both. Authors are forewarned that dividing grapheme clusters or ligatures by element boundaries may give inconsistent or undesired results.

1.5. Text Processing

Tests

This section has adequate coverage. Exhaustive coverage unrealistic, since this section is effectively a dependency on all of Unicode. Some tests nonetheless provided for key functionality (such as the effect of certain control characters on Arabic shaping).

CSS is built on Unicode. [UNICODE] UAs that support Unicode must adhere to all normative requirements of the Unicode Core Standard, except where explicitly overridden by CSS. UAs implemented on the basis of a non-Unicode text encoding model are still expected to fulfill the same text handling requirements by assuming an appropriate mapping and analogous behavior.

Tests

For the purpose of determining adjacency for text processing (such as white space processing, text transformation, line-breaking, etc.), and thus in general within this specification, intervening inline box boundaries and out-of-flow elements must be ignored. With respect to text shaping, however, see § 7.3 Shaping Across Element Boundaries.

Tests

2. Transforming Text

Tests

This section and its subsections have good test coverage overall, and very good i18n coverage in particular.

Missing tests:

no test of Animation type.
Applies to text

Possible additions:

An automated test for plain text copy&paste not applying transforms. Not clear such an automated test is possible, but it would be nice to have one if it were.

2.1. Case Transforms: the text-transform property

Name:	text-transform
Value:	none \| [capitalize \| uppercase \| lowercase ] \|\| full-width \|\| full-size-kana
Initial:	none
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	specified keyword
Canonical order:	n/a
Animation type:	discrete

Tests

c545-txttrans-000.xht (live test) (source)

This property transforms text for styling purposes. It has no effect on the underlying content, and must not affect the content of a plain text copy & paste operation.

Tests

text-transform-upperlower-105.html (live test) (source)

Authors must not rely on text-transform for semantic purposes; rather the correct casing and semantics should be encoded in the source document text and markup.

Tests

text-transform-copy-paste-001-manual.html (manual test) (source)

Values have the following meanings:

none

No effects.

Tests

text-transform-none-001.xht (live test) (source)

text-transform-004.xht (live test) (source)

capitalize

Puts the first typographic letter unit of each word, if lowercase, in titlecase; other characters are unaffected.

Tests

uppercase

Puts all letters in uppercase.

Tests

lowercase

Puts all letters in lowercase.

Tests

full-width

Puts all typographic character units in full-width form. If a character does not have a corresponding full-width form, it is left as is. This value is typically used to typeset Latin letters and digits as if they were ideographic characters.

Tests

full-size-kana

Converts all small Kana characters to the equivalent full-size Kana. This value is typically used for ruby annotation text, where authors may want all small Kana to be drawn as large Kana to compensate for legibility issues at the small font sizes typically used in ruby.

Tests

The following example converts the ASCII characters used in abbreviations in Japanese text to their full-width variants so that they lay out and line break like ideographs:

abbr:lang(ja) { text-transform: full-width; }

Note: The purpose of text-transform is to allow for presentational casing transformations without affecting the semantics of the document. Note in particular that text-transform casing operations are lossy, and can distort the meaning of a text. While accessibility interfaces may wish to convey the apparent casing of the rendered text to the user, the transformed text cannot be relied on to accurately represent the underlying meaning of the document.

In this example, the first line of text is capitalized as a visual effect.

section > p:first-of-type::first-line {
  text-transform: uppercase;
}

This effect cannot be written into the source document because the position of the line break depends on layout. But also, the capitalization is not reflecting a semantic distinction and is not intended to affect the paragraph’s reading; therefore it belongs in the presentation layer.

In this example, the ruby annotations, which are half the size of the main paragraph text, are transformed to use regular-size kana in place of small kana.

rt { font-size: 50%; text-transform: full-size-kana; }
:is(h1, h2, h3, h4) rt { text-transform: none; /* unset for large text*/ }

Note that while this makes such letters easier to see at small type sizes, the transformation distorts the text: the reader needs to mentally substitute small kana in the appropriate places—not unlike reading a Latin inscription where all “U”s look like “V”s.

For example, if text-transform: full-size-kana were applied to the following source, the annotation would read “じゆう” (jiyū), which means “liberty”, instead of “じゅう” (jū), which means “ten”, the correct reading and meaning for the annotated “十”.

<ruby>十<rt>じゅう</ruby>

2.1.1. Mapping Rules

For capitalize, what constitutes a “word“ is UA-dependent; [UAX29] is suggested (but not required) for determining such word boundaries. Out-of-flow elements and inline element boundaries must not introduce a text-transform word boundary and must be ignored when determining such word boundaries.

Tests

Note: Authors cannot depend on capitalize to follow language-specific titlecasing conventions (such as skipping articles in English).

The UA must use the full case mappings for Unicode characters, including any conditional casing rules, as defined in the Default Case Algorithms section of The Unicode Standard. [UNICODE] If (and only if) the content language of the element is, according to the rules of the document language, known, then any appropriate language-specific rules must be applied as well. These minimally include, but are not limited to, the language-specific rules in Unicode’s SpecialCasing.txt.

Tests

For example, in Turkish there are two “i”s, one with a dot—“İ” and “i”—and one without—“I” and “ı”. Thus the usual case mappings between “I” and “i” are replaced with a different set of mappings to their respective dotless/dotted counterparts, which do not exist in English. This mapping must only take effect if the content language is Turkish written in its modern Latin-based writing system (or another Turkic language that uses Turkish casing rules); in other languages, the usual mapping of “I” and “i” is required. This rule is thus conditionally defined in Unicode’s SpecialCasing.txt file.

Tests

The definition of full-width and half-width forms can be found in Unicode Standard Annex #11: East Asian Width. [UAX11] The mapping to full-width form is defined by taking code points with the <wide> or the <narrow> tag in their Decomposition_Mapping in Unicode Standard Annex #44: Unicode Character Database. [UAX44] For the <narrow> tag, the mapping is from the code point to the decomposition (minus <narrow> tag), and for the <wide> tag, the mapping is from the decomposition (minus the <wide> tag) back to the original code point.

Tests

The mappings for small Kana to full-size Kana are defined in Appendix G: Small Kana Mappings.

2.1.2. Order of Operations

When multiple values are specified and therefore multiple transformations need to be applied, they are applied in the following order:

capitalize, uppercase, and lowercase
full-width
full-size-kana

Tests

text-transform-multiple-001.html (live test) (source)

Text transformation happens after § 4.1.1 Phase I: Collapsing and Transformation but before § 4.1.2 Phase II: Trimming and Positioning. This means that full-width only transforms spaces (U+0020) to U+3000 IDEOGRAPHIC SPACE within preserved white space.

Tests

Note: As defined in Appendix A: Text Processing Order of Operations, transforming text affects line-breaking and other formatting operations.

3. White Space and Wrapping: the white-space property

Tests

This section has good overall test coverage, particularly through tests for § 4 White Space Processing & Control Characters and subsections.

Missing tests:

No test of Animation type
Intrinsic (min and max) sizing tests for normal and nowrap.

Name:	white-space
Value:	normal \| pre \| nowrap \| pre-wrap \| break-spaces \| pre-line
Initial:	normal
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	specified keyword
Canonical order:	n/a
Animation type:	discrete

Tests

c562-white-sp-000.xht (live test) (source)

This property specifies two things:

whether and how white space is collapsed
whether lines may wrap at unforced soft wrap opportunities

Values have the following meanings, which must be interpreted according to the White Space Processing and Line Breaking rules:

normal

This value directs user agents to collapse sequences of white space into a single character (or in some cases, no character). Lines may wrap at allowed soft wrap opportunities, as determined by the line-breaking rules in effect, in order to minimize inline-axis overflow.

Tests

pre

This value prevents user agents from collapsing sequences of white space. Segment breaks such as line feeds are preserved as forced line breaks. Lines only break at forced line breaks; content that does not fit within the block container overflows it.

Tests

white-space-pre-001.xht (live test) (source)
white-space-pre-002.xht (live test) (source)
white-space-pre-005.xht (live test) (source)
white-space-pre-006.xht (live test) (source)
white-space-pre-007.xht (visual test) (source)
white-space-pre-element-001.xht (live test) (source)

nowrap

Like normal, this value collapses white space; but like pre, it does not allow wrapping.

Tests

pre-wrap

Like pre, this value preserves white space; but like normal, it allows wrapping.

Tests

break-spaces

The behavior is identical to that of pre-wrap, except that:

Note: This value does not guarantee that there will never be any overflow due to white space: for example, if the line length is so short that even a single white space character does not fit, overflow is unavoidable.

pre-line

Like normal, this value collapses consecutive white space characters and allows wrapping, but it preserves segment breaks in the source as forced line breaks.

Tests

White space that was not removed or collapsed due to white space processing is called preserved white space.

Note: In some cases, preserved white space and other space separators can hang when at the end of the line; this can affect whether they are measured for intrinsic sizing.

The following informative table summarizes the behavior of various white-space values:

	New Lines	Spaces and Tabs	Text Wrapping	End-of-line spaces	End-of-line other space separators
normal	Collapse	Collapse	Wrap	Remove	Hang
pre	Preserve	Preserve	No wrap	Preserve	No wrap
nowrap	Collapse	Collapse	No wrap	Remove	Hang
pre-wrap	Preserve	Preserve	Wrap	Hang	Hang
break-spaces	Preserve	Preserve	Wrap	Wrap	Wrap
pre-line	Preserve	Collapse	Wrap	Remove	Hang

Tests

See White Space Processing Rules for details on how white space collapses.

See Line Breaking for details on wrapping behavior.

4. White Space Processing & Control Characters

Tests

This section has reasonably good test coverage.

Missing tests:

“As required by Unicode, unsupported Default_ignorable characters must be ignored for text rendering”

The source text of a document often contains formatting that is not relevant to the final rendering: for example, breaking the source into segments (lines) for ease of editing or adding white space characters such as tabs and spaces to indent the source code. CSS white space processing allows the author to control interpretation of such formatting: to preserve or collapse it away when rendering the document. White space processing in CSS (which is controlled with the white-space property) interprets white space characters only for rendering: it has no effect on the underlying document data.

Note: Depending on the document language, segments can be separated by a particular newline sequence (such as a line feed or CRLF pair), or delimited by some other mechanism, such as the SGML RECORD-START and RECORD-END tokens.

For CSS processing, each document language–defined “segment break” or “newline sequence”—or if none are defined, each line feed (U+000A)—in the text is treated as a segment break, which is then interpreted for rendering as specified by the white-space property.

In the case of HTML, newlines are normalized to line feed characters (U+000A) for representation in the DOM, so when an HTML document is represented as a DOM tree each line feed (U+000A) is treated as a segment break. [HTML] [DOM]

Note: In most common CSS implementations, HTML does not get styled directly. Instead, it is processed into a DOM tree, which is then styled. Unlike HTML, the DOM does not give any particular meaning to carriage returns (U+000D), so they are not treated as segment breaks. If carriage returns (U+000D) are inserted into the DOM by means other than HTML parsing, they then get treated as defined below.

Tests

Note: A document parser might not only normalize any segment breaks, but also collapse other space characters or otherwise process white space according to markup rules. Because CSS processing occurs after the parsing stage, it is not possible to restore these characters for styling. Therefore, some of the behavior specified below can be affected by these limitations and may be user agent dependent.

Note: Anonymous blocks consisting entirely of collapsible white space are removed from the rendering tree. Thus any such white space surrounding a block-level element is collapsed away. See Cascading Style Sheets Level 2 Revision 1 (CSS 2.1) Specification § visuren#anonymous. [CSS2]

Control characters (Unicode category Cc)—other than tabs (U+0009), line feeds (U+000A), carriage returns (U+000D) and sequences that form a segment break—must be rendered as a visible glyph which the UA must synthesize if the glyphs found in the font are not visible, and must be otherwise treated as any other character of the Other Symbols (So) general category and Common script. The UA may use a glyph provided by a font specifically for the control character, substitute the glyphs provided for the corresponding symbol in the Control Pictures block, generate a visual representation of its code point value, or use some other method to provide an appropriate visible glyph. As required by Unicode, unsupported Default_ignorable characters must be ignored for text rendering. [UNICODE]

Tests

control-characters-001.html (visual test) (source)

control-characters-002.xht (visual test) (source)
white-space-control-characters-001.xht (visual test) (source)

Carriage returns (U+000D) are treated identically to spaces (U+0020) in all respects.

Tests

control-chars-00D.html (live test) (source)

Note: For HTML documents, carriage returns present in the source code are converted to line feeds at the parsing stage (see HTML § 13.2.3.5 Preprocessing the input stream and the definition of normalize newlines in Infra and therefore do no appear as U+000D CARRIAGE RETURN to CSS. [HTML] [INFRA]) However, the character is preserved—and the above rule observable—when encoded using an escape sequence ().

4.1. The White Space Processing Rules

Tests

This section has good test coverage, all parts are well exercised. Most tests to be found in subsections.

Except where specified otherwise, white space processing in CSS affects only the document white space characters: spaces (U+0020), tabs (U+0009), and segment breaks.

Tests

Note: The set of characters considered document white space (part of the document content) and those considered syntactic white space (part of the CSS syntax) are not necessarily identical. However, since both include spaces (U+0020), tabs (U+0009), and line feeds (U+000A) most authors won’t notice any differences.

Besides space (U+0020) and no-break space (U+00A0), Unicode defines a number of additional space separator characters. [UNICODE] In this specification all characters in the Unicode general category Zs except space (U+0020) and no-break space (U+00A0) are collectively referred to as other space separators.

Tests

4.1.1. Phase I: Collapsing and Transformation

Tests

This section has good test coverage, all parts are well exercised.

For each inline (including anonymous inlines; see Cascading Style Sheets Level 2 Revision 1 (CSS 2.1) Specification § visuren#anonymous [CSS2]) within an inline formatting context, white space characters are processed as follows prior to line breaking and bidi reordering, ignoring bidi formatting characters (characters with the Bidi_Control property [UAX9]) as if they were not there:

Tests

If white-space is set to normal, nowrap, or pre-line, white space characters are considered collapsible and are processed by performing the following steps:
1. Any sequence of collapsible spaces and tabs immediately preceding or following a segment break is removed.
  Tests
2. Collapsible segment breaks are transformed for rendering according to the segment break transformation rules.
3. Every collapsible tab is converted to a collapsible space (U+0020).
  Tests
4. Any collapsible space immediately following another collapsible space—even one outside the boundary of the inline containing that space, provided both spaces are within the same inline formatting context—is collapsed to have zero advance width. (It is invisible, but retains its soft wrap opportunity, if any.)
  Tests
If white-space is set to pre, pre-wrap, or break-spaces, any sequence of spaces is treated as a sequence of non-breaking spaces. However, for pre-wrap, a soft wrap opportunity exists at the end of a sequence of spaces and/or tabs, while for break-spaces, a soft wrap opportunity exists after every space and every tab.
Tests

Tests

The following example illustrates the interaction of white-space collapsing and bidirectionality. Consider the following markup fragment, taking special note of spaces (with varied backgrounds and borders for emphasis and identification):

<ltr>A <rtl> B </rtl> C</ltr>

where the <ltr> element represents a left-to-right embedding and the <rtl> element represents a right-to-left embedding. If the white-space property is set to normal, the white-space processing model will result in the following:

The space before the B ( ) will collapse with the space after the A ( ).
The space before the C ( ) will collapse with the space after the B ( ).

This will leave two spaces, one after the A in the left-to-right embedding level, and one after the B in the right-to-left embedding level. The text will then be ordered according to the Unicode bidirectional algorithm, with the end result being:

A  BC

Note that there will be two spaces between A and B, and none between B and C. This is best avoided by putting spaces outside the element instead of just inside the opening and closing tags and, where practical, by relying on implicit bidirectionality instead of explicit embedding levels.

Tests

white-space-bidirectionality-001.xht (live test) (source)

4.1.2. Phase II: Trimming and Positioning

Tests

This section has good test coverage, all parts are well exercised.

Then, the entire block is rendered. Inlines are laid out, taking bidi reordering into account, and wrapping as specified by the white-space property. As each line is laid out,

A sequence of collapsible spaces at the beginning of a line is removed.
Tests
If the tab size is zero, preserved tabs are not rendered. Otherwise, each preserved tab is rendered as a horizontal shift that lines up the start edge of the next glyph with the next tab stop. If this distance is less than 0.5ch, then the subsequent tab stop is used instead. Tab stops occur at points that are multiples of the tab size from the starting content edge of the preserved tab’s nearest block container ancestor. The tab size is given by the tab-size property.
Tests
- white-space-processing-042.xht (live test) (source)
Note: See the Unicode rules on how tabulation (U+0009) interacts with bidi. [UAX9]
Tests
- bidi-tab-001.html (live test) (source)
- tab-bidi-001.html (live test) (source)
A sequence of collapsible spaces at the end of a line is removed, as well as any trailing U+1680   OGHAM SPACE MARK whose white-space property is normal, nowrap, or pre-line.
Tests
Note: Due to Unicode Bidirectional Algorithm rule L1, a sequence of collapsible spaces located at the end of the line prior to bidi reordering will also be at the end of the line after reordering. [UAX9] [CSS-WRITING-MODES-4]
Tests
If there remains any sequence of white space, other space separators, and/or preserved tabs at the end of a line (after bidi reordering [CSS-WRITING-MODES-4]):

This example shows that conditionally hanging white space at the end of lines with forced breaks provides symmetry with the start of the line. An underline is added to help visualize the spaces.

p {
  white-space: pre-wrap;
  width: 5ch;
  border: solid 1px;
  font-family: monospace;
  text-align: center;
}

<p> 0 </p>

The sample above would be rendered as follows:

0

Since the final space is before a forced line break and does not overflow, it does not hang, and centering works as expected.

This example illustrates the difference between hanging spaces at the end of lines without forced breaks, and conditionally hanging them at the end of lines with forced breaks. An underline is added to help visualize the spaces.

p {
  white-space: pre-wrap;
  width: 3ch;
  border: solid 1px;
  font-family: monospace;
}

<p> 0 0 0 0 </p>

The sample above would be rendered as follows:

0

If p { text-align: right; } was added, the result would be as follows:

0

As the preserved spaces at the end of lines without a forced break must hang, they are not considered when placing the rest of the line during text alignment. When aligning towards the end, this means any such spaces will overflow, and will not prevent the rest of the line’s content from being flush with the edge of the line. On the other hand, preserved spaces at the end of a line with a forced break conditionally hang. Since the space at the end of the last line would not overflow in this example, it does not hang and therefore is considered during text alignment.

In the following example, there is not enough room on any line to fit the end-of-line spaces, so they hang on all lines: the one on the line without a forced break because it must, as well as the one on the line with a forced break, because it conditionally hangs and overflows. An underline is added to help visualize the spaces.

p {
  white-space: pre-wrap;
  width: 3ch;
  border: solid 1px;
  font-family: monospace;
}

<p>0 0 0 0 </p>

0 0 
0 0 

The last line is not wrapped before the last 0 because characters that conditionally hang are not considered when measuring the line’s contents for fit.

4.1.3. Segment Break Transformation Rules

Tests

This section has reasonable test coverage, though some assertions are only tested indirectly through test for other features that rely on this, rather than by dedicated tests.

When white-space is pre, pre-wrap, break-spaces, or pre-line, segment breaks are not collapsible and are instead transformed into a preserved line feed (U+000A).

Tests

For other values of white-space, segment breaks are collapsible, and are collapsed as follows:

First, any collapsible segment break immediately following another collapsible segment break is removed.
Tests
- segment-break-transformation-unremovable-2.html (live test) (source)
- segment-break-transformation-unremovable-4.html (live test) (source)
Then any remaining segment break is either transformed into a space (U+0020) or removed depending on the context before and after the break. The rules for this operation are UA-defined in this level.
Tests
Note: The white space processing rules have already removed any tabs and spaces around the segment break before this context is evaluated.

The purpose of the segment break transformation rules (and white space collapsing in general) is to “unbreak” text that has been broken into segments to make the document source code easier to work with. In languages that use word separators, such as English and Korean, “unbreaking” a line requires joining the two lines with a space.

Here is an English paragraph
that is broken into multiple lines
in the source code so that it can
be more easily read and edited
in a text editor.

Here is an English paragraph that is broken into multiple lines in the source code so that it can be more easily read and edited in a text editor.

Eliminating a line break in English requires maintaining a space in its place.

In languages that have no word separators, such as Chinese, “unbreaking” a line requires joining the two lines with no intervening space.

這個段落是那麼長，
在一行寫不行。最好
用三行寫。

這個段落是那麼長，在一行寫不行。最好用三行寫。

Eliminating a line break in Chinese requires eliminating any intervening white space.

The segment break transformation rules can use adjacent context to either transform the segment break into a space or eliminate it entirely.

Note: Historically, HTML and CSS have unconditionally converted segment breaks to spaces, which has prevented content authored in languages such as Chinese from being able to break lines within the source. Thus UA heuristics need to be conservative about where they discard segment breaks even as they strive to improve support for such languages.

4.2. Tab Character Size: the tab-size property

Tests

This section has good test coverage.

Missing test:

Applies to text

Name:	tab-size
Value:	<number [0,∞]> \| <length [0,∞]>
Initial:	8
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	the specified number or absolute length
Canonical order:	n/a
Animation type:	by computed value type

Tests

This property determines the tab size used to render preserved tab characters (U+0009). A <number> represents the measure as a multiple of the advance width of the space character (U+0020) of the nearest block container ancestor of the preserved tab, including its associated letter-spacing and word-spacing. Negative values are not allowed.

Tests

white-space-processing-042.xht (live test) (source)

5. Line Breaking and Word Boundaries

Tests

Tests mostly not needed for this section: these are definitions, they get tested through their application, not by themselves.

Can be a good section to host tests for i18n requirements not covered in detail by the spec.

When inline-level content is laid out into lines, it is broken across line boxes. Such a break is called a line break. When a line is broken due to explicit line-breaking controls (such as a preserved newline character), or due to the start or end of a block, it is a forced line break. When a line is broken due to content wrapping (i.e. when the UA creates unforced line breaks in order to fit the content within the measure), it is a soft wrap break. The process of breaking inline-level content into lines is called line breaking.

Wrapping is only performed at an allowed break point, called a soft wrap opportunity. When wrapping is enabled (see white-space), the UA must minimize the amount of content overflowing a line by wrapping the line at a soft wrap opportunity, if one exists.

Tests

line-breaking-020.html (live test) (source)

In most writing systems, in the absence of hyphenation a soft wrap opportunity occurs only at word boundaries. Many such systems use spaces or punctuation to explicitly separate words, and soft wrap opportunities can be identified by these characters. Scripts such as Thai, Lao, and Khmer, however, do not use spaces or punctuation to separate words. Although the zero width space (U+200B) can be used as an explicit word delimiter in these scripts, this practice is not common. As a result, a lexical resource is needed to correctly identify soft wrap opportunities in such texts.

In some other writing systems, soft wrap opportunities are based on orthographic syllable boundaries, not word boundaries. Some of these systems, such as Javanese and Balinese, are similar to Thai and Lao in that they require analysis of the text to find breaking opportunities. In others such as Chinese (as well as Japanese, Yi, and sometimes also Korean), each syllable tends to correspond to a single typographic letter unit, and thus line breaking conventions allow the line to break anywhere except between certain character combinations. Additionally the level of strictness in these restrictions varies with the typesetting style.

Tests

While CSS does not fully define where soft wrap opportunities occur, some controls are provided to distinguish common variations:

The line-break property allows choosing various levels of “strictness” for line breaking restrictions.
The word-break property controls what types of letters are glommed together to form unbreakable “words”, causing CJK characters to behave like non-CJK text or vice versa.
The hyphens property controls whether automatic hyphenation is allowed to break words in scripts that hyphenate.
The overflow-wrap property allows the UA to take a break anywhere in otherwise-unbreakable strings that would otherwise overflow.

Note: Unicode Standard Annex #14: Unicode Line Breaking Algorithm defines a baseline behavior for line breaking for all scripts in Unicode, which is expected to be further tailored. [UAX14] More information on line breaking conventions can be found in Requirements for Japanese Text Layout [JLREQ] and Formatting Rules for Japanese Documents [JIS4051] for Japanese, Requirements for Chinese Text Layout [CLREQ] and General Rules for Punctuation [ZHMARK] for Chinese. See also the Internationalization Working Group’s Language Enablement Index which includes more information on additional languages. [TYPOGRAPHY] Any guidance on additional appropriate references would be much appreciated.

Tests

Generic line-breaking tests not particularly anchored to any specific spec language

shaping_lig-001.html (live test) (source)

5.1. Line Breaking Details

Tests

This section has partial test coverage.

Missing tests:

For soft wrap opportunities before the first or after the last character of a box, the break occurs immediately before/after the box (at its margin edge) rather than breaking the box between its content edge and the content.

Untestable(?):

UAs that allow wrapping at punctuation other than spaces should prioritize breakpoints. […]

When determining line breaks:

The interaction of line breaking and bidirectional text is defined by CSS Writing Modes 4 § 2.4 Applying the Bidirectional Reordering Algorithm and the Unicode Bidirectional Algorithm (UAX9§3.4 Reordering Resolved Levels in particular). [CSS-WRITING-MODES-4] [UAX9]
Tests
Preserved segment breaks, and—regardless of the white-space value—any Unicode character with the BK and NL line breaking class, must be treated as forced line breaks. [UAX14]
Tests
- line-breaking-022.html (live test) (source)
Note: The bidi implications of such forced line breaks are defined by the Unicode Bidirectional Algorithm. [UAX9]
Except where explicitly defined otherwise (e.g. for line-break: anywhere or overflow-wrap: anywhere) line breaking behavior defined for the WJ, ZW, GL, and ZWJ Unicode line breaking classes must be honored. [UAX14]
Tests
UAs that allow wrapping at punctuation other than word separators in writing systems that use them should prioritize breakpoints. (For example, if breaks after slashes are given a lower priority than spaces, the sequence “check /etc” will never break between the "/" and the "e".) As long as care is taken to avoid such awkward breaks, allowing breaks at appropriate punctuation other than word separators is recommended, as it results in more even-looking margins, particularly in narrow measures. The UA may use the width of the containing block, the text’s language, the line-break value, and other factors in assigning priorities: CSS does not define prioritization of soft wrap opportunities. Prioritization of word separators is not expected, however, if word-break: break-all is specified (since this value explicitly requests line breaking behavior not based on breaking at word separators)—and is forbidden under line-break: anywhere.
Out-of-flow elements and inline element boundaries do not introduce a forced line break or soft wrap opportunity in the flow.
Tests
For Web-compatibility there is a soft wrap opportunity before and after each replaced element or other atomic inline, even when adjacent to a character that would normally suppress them, including U+00A0 NO-BREAK SPACE. However, with the exception of U+00A0 NO-BREAK SPACE, there must be no soft wrap opportunity between atomic inlines and adjacent characters belonging to the Unicode GL, WJ, or ZWJ line breaking classes. [UAX14]
Tests
For soft wrap opportunities created by characters that disappear at the line break (e.g. U+0020 SPACE), properties on the box directly containing that character control the line breaking at that opportunity. For soft wrap opportunities defined by the boundary between two characters or atomic inlines, the white-space property on the nearest common ancestor of the two characters controls breaking; which elements’ line-break, word-break, and overflow-wrap properties control the determination of soft wrap opportunities at such boundaries is undefined in Level 3.
Tests
For soft wrap opportunities before the first or after the last character of a box, the break occurs immediately before/after the box (at its margin edge) rather than breaking the box between its content edge and the content.
Line breaking in/around Ruby is defined in CSS Ruby Annotation Layout 1 § 3.4 Breaking Across Lines. [CSS-RUBY-1]
In order to avoid unexpected overflow, if the user agent is unable to perform the requisite lexical or orthographic analysis for line breaking any content language that requires it—for example due to lacking a dictionary for certain languages—it must assume a soft wrap opportunity between pairs of typographic letter units in that writing system.
Tests
Note: This provision is not triggered merely when the UA fails to find a word boundary in a particular text run; the text run may well be a single unbreakable word. It applies for example when a text run is composed of Khmer characters (U+1780 to U+17FF) if the user agent does not know how to determine word boundaries in Khmer.

5.2. Breaking Rules for Letters: the word-break property

Tests

This section has partial test coverage.

Missing tests:

Applies to text
No test of Animation type.
affects intrinsic sizing (tested for word-break:break-word)
treating non-letter typographic character units belonging to the NU, AL, AI, or ID Unicode line breaking classes
any typographic character units resolving to the any typographic letter units (and any typographic character units resolving to the NU (“numeric”), AL (“alphabetic”), or SA (“Southeast Asian”) line breaking classes
effect of word-break:keep-all on NU and AI classes
Symbols that line-break the same way as letters of a particular category are affected the same way as those letters.
does not suppress wbr
More tests for “does not affect rules governing the soft wrap opportunities created around punctuation

Name:	word-break
Value:	normal \| keep-all \| break-all \| break-word
Initial:	normal
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	specified keyword
Canonical order:	n/a
Animation type:	discrete

Tests

This property specifies soft wrap opportunities between letters, i.e. where it is “normal” and permissible to break lines of text. Specifically it controls whether a soft wrap opportunity generally exists between adjacent typographic letter units, treating non-letter typographic character units belonging to the NU, AL, AI, or ID Unicode line breaking classes as typographic letter units for this purpose (only). [UAX14] It does not affect rules governing the soft wrap opportunities created by white space (as well as by other space separators) and around punctuation. (See line-break for controls affecting punctuation and small kana.)

Tests

For example, in some styles of CJK typesetting, English words are allowed to break between any two letters, rather than only at spaces or hyphenation points; this can be enabled with word-break:break-all.

A snippet of Japanese text with English in it.
The word 'caption' is broken into 'capt' and 'ion' across two lines. — An example of English text embedded in Japanese being broken at an arbitrary point in the word.

As another example, Korean has two styles of line-breaking: between any two Korean syllables (word-break: normal) or, like English, mainly at spaces (word-break: keep-all).

각 줄의 마지막에 한글이 올 때 줄 나눔 기
준을 “글자” 또는 “어절” 단위로 한다.

각 줄의 마지막에 한글이 올 때 줄 나눔
기준을 “글자” 또는 “어절” 단위로 한다.

Ethiopic similarly has two styles of line-breaking, either only breaking at word separators (word-break: normal), or also allowing breaks between letters within a word (word-break: break-all).

ተወልዱ፡ኵሉ፡ሰብእ፡ግዑዛን፡ወዕሩያን፡
በማዕረግ፡ወብሕግ።ቦሙ፡ኅሊና፡ወዐቅል፡
ወይትጌበሩ፡አሐዱ፡ምስለ፡አሀዱ፡
በመንፈሰ፡እኍና።

ተወልዱ፡ኵሉ፡ሰብእ፡ግዑዛን፡ወዕሩያን፡በማ
ዕረግ፡ወብሕግ።ቦሙ፡ኅሊና፡ወዐቅል፡ወይትጌ
በሩ፡አሐዱ፡ምስለ፡አሀዱ፡በመንፈሰ፡እኍና።

Note: To enable additional break opportunities only in the case of overflow, see overflow-wrap.

Values have the following meanings:

normal

Words break according to their customary rules, as described above. Korean, which commonly exhibits two different behaviors, allows breaks between any two consecutive Hangul/Hanja. For Ethiopic, which also exhibits two different behaviors, such breaks within words are not allowed.

Tests

break-all

Breaking is allowed within “words”: specifically, in addition to soft wrap opportunities allowed for normal, any typographic letter units (and any typographic character units resolving to the NU (“numeric”), AL (“alphabetic”), or SA (“Southeast Asian”) line breaking classes [UAX14]) are instead treated as ID (“ideographic characters”) for the purpose of line-breaking. Hyphenation is not applied.

Tests

Note: This value does not affect whether there are soft wrap opportunities around punctuation characters. To allow breaks anywhere, see line-break: anywhere.

Tests

Note: This option enables the other common behavior for Ethiopic. It is also often used in a context where the text consists predominantly of CJK characters with only short non-CJK excerpts, and it is desired that the text be better distributed on each line.

keep-all

Breaking is forbidden within “words”: implicit soft wrap opportunities between typographic letter units (or other typographic character units belonging to the NU, AL, AI, or ID Unicode line breaking classes [UAX14]) are suppressed, i.e. breaks are prohibited between pairs of such characters (regardless of line-break settings other than anywhere) except where opportunities exist due to dictionary-based breaking. Otherwise this option is equivalent to normal. In this style, sequences of CJK characters do not break.

Tests

Note: This is the other common behavior for Korean (which uses spaces between words), and is also useful for mixed-script text where CJK snippets are mixed into another language that uses spaces for separation.

Symbols that line-break the same way as letters of a particular category are affected the same way as those letters.

Here’s a mixed-script sample text:

这是一些汉字 and some Latin و کمی خط عربی และตัวอย่างการเขียนภาษาไทย በጽሑፍ፡ማራዘሙን፡አንዳንድ፡

The break-points are determined as follows (indicated by ‘·’):

word-break: normal

这·是·一·些·汉·字·and·some·Latin·و·کمی·خط·عربی·และ·ตัวอย่าง·การเขียน·ภาษาไทย·በጽሑፍ፡·ማራዘሙን፡·አንዳንድ፡

word-break: break-all

这·是·一·些·汉·字·a·n·d·s·o·m·e·L·a·t·i·n·و·ﮐ·ﻤ·ﻰ·ﺧ·ﻁ·ﻋ·ﺮ·ﺑ·ﻰ·แ·ล·ะ·ตั·ว·อ·ย่·า·ง·ก·า·ร·เ·ขี·ย·น·ภ·า·ษ·า·ไ·ท·ย·በ·ጽ·ሑ·ፍ፡·ማ·ራ·ዘ·ሙ·ን፡·አ·ን·ዳ·ን·ድ፡

word-break: keep-all

这是一些汉字·and·some·Latin·و·کمی·خط·عربی·และ·ตัวอย่าง·การเขียน·ภาษาไทย·በጽሑፍ፡·ማራዘሙን፡·አንዳንድ፡

Japanese is usually typeset allowing line breaks within words. However, it is sometimes preferred to suppress these wrapping opportunities and to only allow wrapping at the end of certain sentence fragments. This is most commonly done in very short pieces of text, such as headings and table or figure captions.

This can be achieved by marking the allowed wrapping points with wbr or U+200B ZERO WIDTH SPACE, and suppressing the other ones using word-break: keep-all.

For instance, the following markup can produce either of the renderings below, depending on the value of the word-break property:

<h1>窓ぎわの<wbr>トットちゃん</h1>

	`h1 { word-break: normal }`	`h1 { word-break: keep-all }`
Expected rendering	窓ぎわのトットちゃん	窓ぎわのトットちゃん
Result in your browser	`窓ぎわのトットちゃん`	`窓ぎわのトットちゃん`

When shaping scripts such as Arabic are allowed to break within words due to break-all the characters must still be shaped as if the word were not broken (see § 5.6 Shaping Across Intra-word Breaks).

Tests

word-break-break-all-004.html (live test) (source)

For compatibility with legacy content, the word-break property also supports a deprecated break-word keyword. When specified, this has the same effect as word-break: normal and overflow-wrap: anywhere, regardless of the actual value of the overflow-wrap property.

Tests

5.3. Line Breaking Strictness: the line-break property

Tests

This section has extensive test coverage for CJK.

Missing tests:

applies to text
affects intrinsic sizing

Untestable(?):

behavior of “auto”

Name:	line-break
Value:	auto \| loose \| normal \| strict \| anywhere
Initial:	auto
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	specified keyword
Canonical order:	n/a
Animation type:	discrete

Tests

This property specifies the strictness of line-breaking rules applied within an element: especially how wrapping interacts with punctuation and symbols. Values have the following meanings:

auto

The UA determines the set of line-breaking restrictions to use, and it may vary the restrictions based on the length of the line; e.g., use a less restrictive set of line-break rules for short lines.

loose

Breaks text using the least restrictive set of line-breaking rules. Typically used for short lines, such as in newspapers.

normal

Breaks text using the most common set of line-breaking rules.

strict

Breaks text using the most stringent set of line-breaking rules.

anywhere

There is a soft wrap opportunity around every typographic character unit, including around any punctuation character or preserved white spaces, or in the middle of words, disregarding any prohibition against line breaks, even those introduced by characters with the GL, WJ, or ZWJ line breaking classes or mandated by the word-break property. [UAX14] The different wrapping opportunities must not be prioritized. Hyphenation is not applied.

Tests

Note: This value triggers the line breaking rules typically seen in terminals.

Note: anywhere only allows preserved white spaces at the end of the line to be wrapped to the next line when white-space is set to break-spaces, because in other cases:

preserved white space at the end/start of the line is discarded (normal, pre-line)
wrapping is forbidden altogether (nowrap, pre)
the preserved white space hang (pre-wrap).

When it does have an effect on preserved white space, with white-space: break-spaces, it allows breaking before the first space of a sequence, which break-spaces on its own does not.

Tests

CSS distinguishes between four levels of strictness in the rules for text wrapping. The precise set of rules in effect for each of loose, normal, and strict is up to the UA and should follow language conventions. However, for these three keywords, this specification does require that:

The following breaks are forbidden in strict line breaking and allowed in normal and loose:
- breaks before Japanese small kana or the Katakana-Hiragana prolonged sound mark, i.e. characters from the Unicode line breaking class CJ. [UAX14]
  Tests
The following breaks are allowed for normal and loose line breaking if the writing system is Chinese or Japanese, and are otherwise forbidden:
- breaks before certain CJK hyphen-like characters:
  〜 U+301C, ゠ U+30A0
  Tests
The following breaks are allowed for loose line breaking if the preceding character belongs to the Unicode line breaking class ID [UAX14] (including when the preceding character is treated as ID due to word-break: break-all), and are otherwise forbidden:
- breaks before hyphens:
  ‐ U+2010, – U+2013
  Tests
The following breaks are forbidden for normal and strict line breaking and allowed in loose:
- breaks before iteration marks:
  々 U+3005, 〻 U+303B, ゝ U+309D, ゞ U+309E, ヽ U+30FD, ヾ U+30FE
  Tests
- breaks between inseparable characters (such as ‥ U+2025, … U+2026) i.e. characters from the Unicode line breaking class IN. [UAX14]
  Tests
The following breaks are allowed for loose if the writing system is Chinese or Japanese and are otherwise forbidden:
- breaks before certain centered punctuation marks:
  ・ U+30FB, ： U+FF1A, ； U+FF1B, ･ U+FF65, ‼ U+203C, ⁇ U+2047, ⁈ U+2048, ⁉ U+2049, ！ U+FF01, ？ U+FF1F
  Tests
- breaks before suffixes:
  Characters with the Unicode line breaking class PO [UAX14] and the East Asian Width property [UAX11] Ambiguous, Fullwidth, or Wide.
  Tests
- breaks after prefixes:
  Characters with the Unicode line breaking class PR [UAX14] and the East Asian Width property [UAX11] Ambiguous, Fullwidth, or Wide.
  Tests

Note: The requirements listed above only create distinctions in CJK text. In an implementation that matches only the rules above, and no additional rules, line-break would only affect CJK code points unless the writing system is tagged as Chinese or Japanese. Future levels may add additional specific rules for other writing systems and languages as their requirements become known.

As UAs can add additional distinctions between strict/normal/loose modes, these values can exhibit differences in other writing systems as well. For example, a UA with sufficiently-advanced Thai language processing ability could choose to map different levels of strictness in Thai line-breaking to these keywords, e.g. disallowing breaks within compound words in strict mode (e.g. breaking ตัวอย่างการเขียนภาษาไทย as ตัวอย่าง·การเขียน·ภาษาไทย) while allowing more breaks in loose (ตัวอย่าง·การ·เขียน·ภาษา·ไทย).

Note: The CSSWG recognizes that in a future edition of the specification finer control over line breaking may be necessary to satisfy high-end publishing requirements.

5.4. Hyphenation: the hyphens property

Tests

This section has partial test coverage.

Missing tests:

Applies to text
“Automatic hyphenation opportunities within a word must be ignored if the word contains a conditional hyphen (shy or U+00AD), in favor of the conditional hyphen(s)”
“However, if, even after breaking at such opportunities, a portion of that word is still too long to fit on one line, an automatic hyphenation opportunity may be used.”

Hyphenation is the controlled splitting of words where they usually would not be allowed to break to improve the layout of paragraphs, typically splitting words at syllabic or morphemic boundaries and often visually indicating the split (usually by inserting a hyphen, U+2010). In some cases, hyphenation may also alter the spelling of a word. Regardless, hyphenation is a rendering effect only: it must have no effect on the underlying document content or on text selection or searching.

Tests

Hyphenation practices vary across languages, and can involve not just inserting a hyphen before the line break, but inserting a hyphen after the break (or both), inserting a different character than U+2010, or changing the spelling of the word.

Language	Unbroken	Before	After
English	Unbroken	Un‐	broken
Dutch	cafeetje	café‐	tje
Hungarian	Összeg	Ösz‐	szeg
Mandarin	tú’àn	tú‐	àn
Mandarin	àizēng‐fēnmíng	àizēng‐	‐fēnmíng
Uyghur
Cree

Tests

Hyphenation occurs when the line breaks at a valid hyphenation opportunity, which is a type of soft wrap opportunity that exists within a word where hyphenation is allowed. In CSS hyphenation opportunities are controlled with the hyphens property. CSS Text Level 3 does not define the exact rules for hyphenation; however UAs are strongly encouraged to optimize their choice of break points and to chose language-appropriate hyphenation points.

Tests

hyphens-overflow-001.html (live test) (source)

Note: The soft wrap opportunity introduced by the U+002D - HYPHEN-MINUS character or the U+2010 ‐ HYPHEN character is not a hyphenation opportunity, as no visual indication of the split is created when wrapping: these characters are visible whether the line is wrapped at that point or not.

Hyphenation opportunities are considered when calculating min-content intrinsic sizes.

Tests

hyphens-auto-min-content.html (live test) (source)

Note: This allows tables to hyphenate their contents instead of overflowing their containing block, which is particularly important in long-word languages like German.

Name:	hyphens
Value:	none \| manual \| auto
Initial:	manual
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	specified keyword
Canonical order:	n/a
Animation type:	discrete

Tests

This property controls whether hyphenation is allowed to create more soft wrap opportunities within a line of text. Values have the following meanings:

none

Words are not hyphenated, even if characters inside the word explicitly define hyphenation opportunities.

Note: This does not suppress the existing soft wrap opportunities introduced by always visible characters such as U+002D - HYPHEN-MINUS or U+2010 ‐ HYPHEN.

Tests

manual

Words are only hyphenated where there are characters inside the word that explicitly suggest hyphenation opportunities. The UA must use the appropriate language-specific hyphenation character(s) and should apply any appropriate spelling changes just as for automatic hyphenation at the same point.

Tests

In Unicode, U+00AD is a conditional "soft hyphen" and U+2010 is an unconditional hyphen. Unicode Standard Annex #14 describes the role of soft hyphens in Unicode line breaking. [UAX14] In HTML,  represents the soft hyphen character, which suggests a hyphenation opportunity.

ex&shy;ample

auto

Words may be broken at hyphenation opportunities determined automatically by a language-appropriate hyphenation resource in addition to those indicated explicitly by a conditional hyphen. Automatic hyphenation opportunities elsewhere within a word must be ignored if the word contains a conditional hyphen ( or U+00AD SOFT HYPHEN), in favor of the conditional hyphen(s). However, if, even after breaking at such opportunities, a portion of that word is still too long to fit on one line, an automatic hyphenation opportunity may be used.

Tests

hyphens-auto-control.html (live test) (source)

Correct automatic hyphenation requires a hyphenation resource appropriate to the language of the text being broken. The UA must therefore only automatically hyphenate text for which the content language is known and for which it has an appropriate hyphenation resource.

Tests

hyphens-auto-001.html (live test) (source)

Authors should correctly tag their content’s language (e.g. using the HTML lang attribute or XML xml:lang attribute) in order to obtain correct automatic hyphenation.

The UA may use language-tailored heuristics to exclude certain words from automatic hyphenation. For example, a UA might try to avoid hyphenation in proper nouns by excluding words matching certain capitalization and punctuation patterns. Such heuristics are not defined by this specification. (Note that such heuristics will need to vary by language: English and German, for example, have very different capitalization conventions.)

For the purpose of the hyphens property, what constitutes a “word” is UA-dependent. However, inline element boundaries and out-of-flow elements must be ignored when determining word boundaries.

Tests

Any glyphs shown due to hyphenation at a hyphenation opportunity created by a conditional hyphen character (such as U+00AD SOFT HYPHEN) are represented by that character and are styled according to the properties applied to it.

Tests

shy-styling-001.html (live test) (source)

When shaping scripts such as Arabic are allowed to break within words due to hyphenation, the characters must still be shaped as if the word were not broken (see § 5.6 Shaping Across Intra-word Breaks).

Tests

For example, if the Uyghur word “داميدى” were hyphenated, it would appear as [isolated DAL + isolated ALEF + initial MEEM +
medial YEH + hyphen + line-break + final DAL +
isolated ALEF MAKSURA]

[isolated DAL + isolated ALEF + initial MEEM +
medial YEH + hyphen + line-break + final DAL +
isolated ALEF MAKSURA]

not as

[isolated DAL + isolated ALEF + initial MEEM +
final YEH + hyphen + line-break + isolated DAL +
isolated ALEF MAKSURA]

5.5. Overflow Wrapping: the overflow-wrap/word-wrap property

Tests

This section has fairly good test coverage.

Missing tests:

Applies to text
No test of Animation type

Name:	overflow-wrap, word-wrap
Value:	normal \| break-word \| anywhere
Initial:	normal
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	specified keyword
Canonical order:	n/a
Animation type:	discrete

Tests

This property specifies whether the UA may break at otherwise disallowed points within a line to prevent overflow, when an otherwise-unbreakable string is too long to fit within the line box. It only has an effect when white-space allows wrapping. Possible values:

Tests

overflow-wrap-002.html (live test) (source)

normal

Lines may break only at allowed break points. However, the restrictions introduced by word-break: keep-all may be relaxed to match word-break: normal if there are no otherwise-acceptable break points in the line.

Tests

anywhere

An otherwise unbreakable sequence of characters may be broken at an arbitrary point if there are no otherwise-acceptable break points in the line. Shaping characters are still shaped as if the word were not broken, and grapheme clusters must stay together as one unit. No hyphenation character is inserted at the break point. Soft wrap opportunities introduced by anywhere are considered when calculating min-content intrinsic sizes.

Tests

break-word

As for anywhere except that soft wrap opportunities introduced by break-word are not considered when calculating min-content intrinsic sizes.

Tests

For legacy reasons, UAs must treat word-wrap as a legacy name alias of the overflow-wrap property.

Tests

5.6. Shaping Across Intra-word Breaks

Tests

This section has good test coverage.

When shaping scripts such as Arabic wrap at unforced soft wrap opportunities within words (such as when breaking due to word-break: break-all, line-break: anywhere, overflow-wrap: break-word, overflow-wrap: anywhere, or when hyphenating) the characters must still be shaped (their joining forms chosen) as if the word were still whole.

Tests

For example, if the word “نوشتن” is broken between the “ش” and “ت”, the “ش” still takes its initial form (“ﺷ”), and the “ت” its medial form (“ﺘ”)—forming as in “ﻧﻮﺷ | ﺘﻦ”, not as in “نوش | تن”.

6. Alignment and Justification

Tests

Tests only needed in subsections.

Alignment and justification controls how inline content is distributed within a line box.

6.1. Text Alignment: the text-align shorthand

Tests

This section has partial test coverage.

Missing tests:

If (after justification, if any) the inline contents of a line box are too long to fit within it, then the contents are start-aligned: any content that doesn’t fit overflows the line box’s end edge.
“Values other than justify-all or match-parent are assigned to text-align-all and reset text-align-last to auto.”, and being a shorthand in general

Name:	text-align
Value:	start \| end \| left \| right \| center \| justify \| match-parent \| justify-all
Initial:	start
Applies to:	block containers
Inherited:	yes
Percentages:	see individual properties
Computed value:	see individual properties
Animation type:	discrete
Canonical order:	n/a

Tests

c546-txt-align-000.xht (visual test) (source)

text-align-005.xht (visual test) (source)
text-align-applies-to-001.xht (visual test) (source)
text-align-applies-to-002.xht (visual test) (source)
text-align-applies-to-003.xht (visual test) (source)
text-align-applies-to-005.xht (visual test) (source)
text-align-applies-to-006.xht (visual test) (source)
text-align-applies-to-007.xht (visual test) (source)
text-align-applies-to-008.xht (visual test) (source)
text-align-applies-to-009.xht (visual test) (source)
text-align-applies-to-010.xht (visual test) (source)
text-align-applies-to-011.xht (visual test) (source)
text-align-applies-to-012.xht (visual test) (source)
text-align-applies-to-013.xht (visual test) (source)
text-align-applies-to-014.xht (visual test) (source)
text-align-applies-to-015.xht (visual test) (source)
text-align-inherit-001.xht (visual test) (source)
text-align-bidi-011.xht (live test) (source)

This shorthand property sets the text-align-all and text-align-last properties and describes how the inline-level content of a block is aligned along the inline axis if the content does not completely fill the line box. Values other than justify-all or match-parent are assigned to text-align-all and reset text-align-last to auto.

Values have the following meanings:

start

Inline-level content is aligned to the start edge of the line box.

Tests

text-align-006.html (live test) (source)
text-align-start-001.html (live test) (source)
text-align-start-002.html (live test) (source)
text-align-start-003.html (live test) (source)
text-align-start-004.html (live test) (source)
text-align-start-005.html (live test) (source)
text-align-start-006.html (live test) (source)
text-align-start-007.html (live test) (source)
text-align-start-008.html (live test) (source)
text-align-start-009.html (live test) (source)
text-align-start-010.html (live test) (source)
text-align-start-014.html (live test) (source)
text-align-start-015.html (live test) (source)
text-align-start-016.html (live test) (source)
text-align-start-017.html (live test) (source)
text-align-start-018.html (visual test) (source)
text-align-start-019.html (visual test) (source)
text-align-start-020.html (visual test) (source)
text-align-start-021.html (visual test) (source)

end

Inline-level content is aligned to the end edge of the line box.

Tests

text-align-007.html (live test) (source)
text-align-end-001.html (live test) (source)
text-align-end-002.html (live test) (source)
text-align-end-003.html (live test) (source)
text-align-end-004.html (live test) (source)
text-align-end-005.html (live test) (source)
text-align-end-006.html (live test) (source)
text-align-end-007.html (live test) (source)
text-align-end-008.html (live test) (source)
text-align-end-009.html (live test) (source)
text-align-end-010.html (live test) (source)
text-align-end-014.html (live test) (source)
text-align-end-015.html (live test) (source)
text-align-end-016.html (live test) (source)
text-align-end-017.html (live test) (source)
text-align-end-018.html (visual test) (source)
text-align-end-019.html (visual test) (source)
text-align-end-020.html (visual test) (source)
text-align-end-021.html (visual test) (source)

left

Inline-level content is aligned to the line-left edge of the line box. (In vertical writing modes, this can be either the physical top or bottom, depending on writing-mode.) [CSS-WRITING-MODES-4]

Tests

text-align-001.xht (visual test) (source)
text-align-bidi-001.xht (visual test) (source)
text-align-bidi-006.xht (visual test) (source)
text-align-bidi-007.xht (visual test) (source)

right

Inline-level content is aligned to the line-right edge of the line box. (In vertical writing modes, this can be either the physical top or bottom, depending on writing-mode.) [CSS-WRITING-MODES-4]

Tests

text-align-002.xht (visual test) (source)
text-align-bidi-005.xht (visual test) (source)

center

Inline-level content is centered within the line box.

Tests

text-align-003.xht (visual test) (source)
text-align-bidi-002.xht (visual test) (source)
text-align-bidi-003.xht (visual test) (source)
text-align-bidi-004.xht (visual test) (source)
text-align-inherit-001.xht (visual test) (source)

text-align-center-last-center.html (live test) (source)

justify

Text is justified according to the method specified by the text-justify property, in order to exactly fill the line box. Unless otherwise specified by text-align-last, the last line before a forced break or the end of the block is start-aligned.

Tests

letter-spacing-justify-001.xht (live test) (source)
text-align-004.xht (visual test) (source)
text-align-bidi-008.xht (visual test) (source)
text-align-bidi-009.xht (visual test) (source)
text-align-bidi-010.xht (visual test) (source)
text-align-bidi-012.xht (visual test) (source)
text-align-bidi-013.xht (visual test) (source)
text-align-white-space-002.xht (live test) (source)
text-align-white-space-004.xht (live test) (source)
text-align-white-space-006.xht (live test) (source)
text-align-white-space-008.xht (live test) (source)
word-spacing-justify-001.xht (live test) (source)

justify-all

Sets both text-align-all and text-align-last to justify, forcing the last line to justify as well.

Tests

match-parent

This value behaves the same as inherit (computes to its parent’s computed value) except that an inherited value of start or end is interpreted against the parent’s direction value and results in a computed value of either left or right. Computes to start when specified on the root element.

Tests

When specified on the text-align shorthand, sets both text-align-all and text-align-last to match-parent.

Tests

text-align-match-parent-05.html (live test) (source)

A block of text is a stack of line boxes. This property specifies how the inline-level boxes within each line box align with respect to the start and end sides of the line box. Alignment is not with respect to the viewport or containing block.

In the case of justify, the UA may stretch or shrink any inline boxes by adjusting their text. (See text-justify.) If an element’s white space is not collapsible, then the UA is not required to adjust its text for the purpose of justification and may instead treat the text as having no justification opportunities. If the UA chooses to adjust the text, then it must ensure that tab stops continue to line up as required by the white space processing rules.

Tests

If (after justification, if any) the inline contents of a line box are too long to fit within it, then the contents are start-aligned: any content that doesn’t fit overflows the line box’s end edge.

See § 8.3 Bidirectionality and Line Boxes for details on how to determine the start and end edges of a line box.

6.2. Default Text Alignment: the text-align-all property

Tests

This section lacks tests.

Name:	text-align-all
Value:	start \| end \| left \| right \| center \| justify \| match-parent
Initial:	start
Applies to:	block containers
Inherited:	yes
Percentages:	n/a
Computed value:	keyword as specified, except for match-parent which computes as defined above
Canonical order:	n/a
Animation type:	discrete

Tests

This longhand of the text-align shorthand property specifies the inline alignment of all lines of inline content in the block container, except for last lines overridden by a non-auto value of text-align-last. See text-align for a full description of values.

Authors should use the text-align shorthand instead of this property.

6.3. Last Line Alignment: the text-align-last property

Tests

This section has fairly good test coverage: all value combinations for text-align / text-align-last are exercised, except for text-align-last: match-parent (which is exercised, but in a more limited way).

Missing tests:

tests for Animation type

Name:	text-align-last
Value:	auto \| start \| end \| left \| right \| center \| justify \| match-parent
Initial:	auto
Applies to:	block containers
Inherited:	yes
Percentages:	n/a
Computed value:	keyword as specified, except for match-parent which computes as defined above
Canonical order:	n/a
Animation type:	discrete

Tests

inheritance.html (live test) (source)
text-align-last-valid.html (live test) (source)
text-align-last-invalid.html (live test) (source)
text-align-last-computed.html (live test) (source)
text-align-last-013.html (visual test) (source)
text-align-last-014.html (visual test) (source)
text-align-last-justify-br.html (live test) (source)

This property describes how the last line of a block or a line right before a forced line break is aligned.

Tests

text-align-last-001.html (visual test) (source)
text-align-last-002.html (visual test) (source)
text-align-last-003.html (visual test) (source)
text-align-last-004.html (visual test) (source)
text-align-last-005.html (visual test) (source)
text-align-last-006.html (visual test) (source)
text-align-last-010.html (live test) (source)
text-align-last-011.html (live test) (source)
text-align-last-012.html (visual test) (source)
text-align-last-wins-001.html (live test) (source)

If auto is specified, content on the affected line is aligned per text-align-all unless text-align-all is set to justify, in which case it is start-aligned. All other values are interpreted as described for text-align.

Tests

6.4. Justification Method: the text-justify property

Tests

This section has light test coverage. All values (other than auto) are tested, but the tests are minimal. Not sure we can do better though.

Missing text:

Applies to text

Untestable(?):

behavior of auto

Name:	text-justify
Value:	auto \| none \| inter-word \| inter-character
Initial:	auto
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	specified keyword (except for the distribute legacy value)
Canonical order:	n/a
Animation type:	discrete

Tests

This property selects the justification method used when a line’s alignment is set to justify (see text-align). The property applies to text, but is inherited from block containers to the root inline box containing their inline-level contents. It takes the following values:

Tests

text-justify-006.html (live test) (source)

auto

The UA determines the justification algorithm to follow, based on a balance between performance and adequate presentation quality. Since justification rules vary by writing system and language, UAs should, where possible, use a justification algorithm appropriate to the text.

Tests

For example, the UA could use by default a justification method that is a simple universal compromise for all writing systems—such as primarily expanding word separators and between CJK typographic letter units along with secondarily expanding between Southeast Asian typographic letter units. Then, in cases where the content language of the paragraph is known, it could choose a more language-tailored justification behavior e.g. following the Requirements for Japanese Text Layout for Japanese [JLREQ], using cursive elongation for Arabic, using inter-word for German, etc.

Two lines of calligraphic Arabic end together
due to a mix of compressed and swash forms. — An example of cursively-justified Arabic text, rendered by Tasmeem. Like English, Arabic can be justified by adjusting the spacing between words, but in most styles it can also be justified by calligraphically elongating or compressing the letterforms themselves. In this example, the upper text is extended to fill the line by the use of elongated (kashida) forms and swash forms, while the bottom line is compressed slightly by using a stacked combination for the characters between ت and م. By employing traditional calligraphic techniques, a typesetter can justify the line while preserving flow and color, providing a very high quality justification effect. However, this is by its nature a very script-specific effect.

Extra space is partly to spaces and partly among CJK and Thai letters. — Mixed-script text with text-justify: auto: this interpretation uses a universal-compromise justification method, expanding at spaces as well as between CJK and Southeast Asian letters. This effectively uses inter-word + inter-ideograph spacing for lines that have word-separators and/or CJK characters and falls back to inter-cluster behavior for lines that don’t or for which the space stretches too far.

none

Justification is disabled: there are no justification opportunities within the text.

Tests

text-justify-none-001.html (live test) (source)

No extra space is inserted. — Mixed-script text with text-justify: none

Note: This value is intended for use in user stylesheets to improve readability or for accessibility purposes.

inter-word

Justification adjusts spacing at word separators only (effectively varying the used word-spacing on the line). This behavior is typical for languages that separate words using spaces, like English or Korean.

Tests

Extra space is equally distributed mainly to spaces. — Mixed-script text with text-justify: inter-word

inter-character

Justification adjusts spacing between each pair of adjacent typographic character units (effectively varying the used letter-spacing on the line). This value is sometimes used in East Asian systems such as Japanese.

Tests

text-justify-002.html (visual test) (source)

text-justify-inter-character-001.html (live test) (source)

Extra space is equally distributed
at points between spaces and letters of all writing systems. — Mixed-script text with text-justify: inter-character

For legacy reasons, UAs must also support the alternate keyword distribute which must compute to inter-character, thus having the exact same meaning and behavior. UAs may treat this as a legacy value alias.

Tests

text-justify-003.html (visual test) (source)
text-justify-computed-legacy.html (live test) (source)
text-justify-distribute-001.html (live test) (source)

Since optimal justification is language-sensitive, authors should correctly language-tag their content for the best results.

Note: The guidelines in this level of CSS do not describe a complete justification algorithm. They are merely a minimum set of requirements that a complete algorithm should meet. Limiting the set of requirements gives UAs some latitude in choosing a justification algorithm that meets their needs and desired balance of quality, speed, and complexity.

6.4.1. Expanding and Compressing Text

Tests

This section lacks tests.

Missing tests:

whether a typographic character unit provides a justification opportunity is controlled by the text-justify value of its parent;
whether a justification opportunity exists between two consecutive typographic character units is determined by the text-justify value of their nearest common ancestor.
UAs must not break required ligatures or otherwise disable features required to correctly shape complex scripts
… and maybe more

When justifying text, the user agent takes the remaining space between the ends of a line’s contents and the edges of its line box, and distributes that space throughout its content so that the contents exactly fill the line box. The user agent may alternatively distribute negative space, putting more content on the line than would otherwise fit under normal spacing conditions.

A justification opportunity is a point where the justification algorithm may alter spacing within the text. A justification opportunity can be provided by a single typographic character unit (such as a word separator), or by the juxtaposition of two typographic character units. As with controls for soft wrap opportunities, whether a typographic character unit provides a justification opportunity is controlled by the text-justify value of its parent; similarly, whether a justification opportunity exists between two consecutive typographic character units is determined by the text-justify value of their nearest common ancestor.

Space distributed by justification is in addition to the spacing defined by the letter-spacing or word-spacing properties. When such additional space is distributed to a word separator justification opportunity, it is applied under the same rules as for word-spacing. Similarly, when space is distributed to a justification opportunity between two typographic character units, should be applied under the same rules as for letter-spacing.

A justification algorithm may divide justification opportunities into different priority levels. All justification opportunities within a given level are expanded or compressed at the same priority, regardless of which typographic character units created that opportunity. For example, if justification opportunities between two Han characters and between two Latin letters are defined to be at the same level (as they are in the inter-character justification style), they are not treated differently because they originate from different typographic character units. It is not defined in this level whether or how other factors (such as font size, letter-spacing, glyph shape, position within the line, etc.) may influence the distribution of space to justification opportunities within the line.

The UA may enable or break optional ligatures or use other font features such as alternate glyphs or glyph compression to help justify the text under any method. This behavior is not controlled by this level of CSS. However, UAs must not break required ligatures or otherwise disable features required to correctly shape complex scripts.

If a justification opportunity exists within a line, and text alignment specifies full justification (justify) for that line, it must be justified.

6.4.2. Handling Symbols and Punctuation

Tests

This section lacks tests. Not sure what is testable though.

When determining justification opportunities, a typographic character unit from the Unicode Symbols (S*) and Punctuation (P*) classes is generally treated the same as a typographic letter unit of the same script (or, if the character’s script property is Common, then as a typographic letter unit of the dominant script).

However, by typographic tradition there may be additional rules controlling the justification of symbols and punctuation. Therefore, the UA may reassign specific characters or introduce additional levels of prioritization to handle justification opportunities involving symbols and punctuation.

For example, there are traditionally no justification opportunities between consecutive U+2014 — EM DASH, U+2015 ― HORIZONTAL BAR, U+2026 … HORIZONTAL ELLIPSIS, or U+2025 ‥ TWO DOT LEADER characters [JLREQ]; thus a UA might assign these characters to a “never” prioritization level. As another example, certain full-width punctuation characters (such as U+301A 〚 LEFT WHITE SQUARE BRACKET) are considered to contain a justification opportunity in Japanese. The UA might therefore assign these characters to a higher prioritization level than the opportunities between ideographic characters.

6.4.3. Unexpandable Text

Tests

This section has basic test coverage.

Missing tests:

Values of text-align-last other than justify
A broader range of non-stretchable content that just an empty span with padding

If the inline contents of a line cannot be stretched to the full width of the line box, then they must be aligned as specified by the text-align-last property. (If text-align-last is justify, then they must be aligned as for center.)

Tests

text-align-last-empty-inline.html (live test) (source)

6.4.4. Cursive Scripts

Tests

This section lacks automated tests.

Justification must not introduce gaps between the joined typographic letter units of cursive scripts such as Arabic. If it is able, the UA may translate space distributed to justification opportunities within a run of such typographic letter units into some form of cursive elongation for that run. It otherwise must assume that no justification opportunity exists between any pair of typographic letter units in cursive script (regardless of whether they join).

Tests

text-justify-004.html (visual test) (source)
text-justify-005.html (visual test) (source)

The following are examples of unacceptable justification:

Adding gaps between every pair of Arabic letters

Adding gaps between every pair of unjoined Arabic letters

Some font designs allow for the use of the tatweel character for justification. A UA that performs tatweel-based justification must properly handle the rules for its use. Note that correct insertion of tatweel characters depends on context, including the letter-combinations involved, location within the word, and location of the word within the line.

6.4.5. Minimum Requirements for auto Justification

Tests

This section lacks tests.

For auto justification, this specification does not define what all of the justification opportunities are, how they are prioritized, or when and how multiple levels of justification opportunities interact. However, it does require that:

Unless contraindicated by the typographic traditions of the content language or adjacent symbols/punctuation, each of the following provides a justification opportunity:
- Word separators
- The boundary between a typographic character unit of any block scripts and any other typographic character unit
- The boundary between a typographic character unit of any clustered scripts and any other typographic character unit
All letters belonging to all block scripts are treated the same, and all letters belonging to all clustered scripts are treated the same. For example, no distinction is made between the justification opportunity between a Han letter followed by another Han letter, vs. the justification opportunity between a Han letter followed by a Hangul letter.

Further information on text justification can be found in (or submitted to) “Approaches to Full Justification”, which indexes by writing system and language, and is maintained by the W3C Internationalization Working Group. [JUSTIFY]

7. Spacing

Tests

Tests only needed in subsections.

CSS offers control over text spacing via the word-spacing and letter-spacing properties, which specify additional space around word separators or between typographic character units, respectively.

7.1. Word Spacing: the word-spacing property

Tests

This section has limited test coverage.

Missing tests:

Applies to text
inherit lengths as absolute
should be applied half on each side of the character unless otherwise dictated by typographic tradition.
doesn’t do anything between words defined by text analysis like in Thai, only on actual word separators
works on the Ethiopic word space (U+1361), the Aegean word separators (U+10100,U+10101), the Ugaritic word divider (U+1039F), and the Phoenician Word Separator (U+1091F).
word-spacing and bidi

Name:	word-spacing
Value:	normal \| <length>
Initial:	normal
Applies to:	text
Inherited:	yes
Percentages:	N/A
Computed value:	an absolute length
Canonical order:	n/a
Animation type:	by computed value type

Tests

This property specifies additional spacing between “words”. Values are interpreted as defined below:

normal

No additional spacing is applied. Computes to zero.

Tests

word-spacing-100.xht (live test) (source)

word-spacing-computed-001.html (live test) (source)

<length>

Specifies extra spacing in addition to the intrinsic inter-word spacing defined by the font.

Tests

tab-size-spacing-001.html (live test) (source)

word-spacing-002.html (live test) (source)

Additional spacing is applied to each word separator left in the text after the white space processing rules have been applied, and should be applied half on each side of the character unless otherwise dictated by typographic tradition. Values may be negative, but there may be implementation-dependent limits.

Tests

word-spacing-negative-value-001.html (live test) (source)

Word-separator characters are typographic character units whose primary purpose and general usage is to separate words. In Unicode this includes (but is not exhaustively defined as) the space (U+0020), the no-break space (U+00A0), the Ethiopic word space (U+1361), the Aegean word separators (U+10100,U+10101), the Ugaritic word divider (U+1039F), and the Phoenician word separator (U+1091F). [UNICODE]

Tests

word-spacing-characters-001.xht (live test) (source)

Note: Neither punctuation in general, nor fixed-width spaces (such as U+3000 and U+2000 through U+200A), are considered word-separator characters, because even though they frequently happen to separate words, their primary purpose is not to separate words.

Tests

word-spacing-characters-002.xht (live test) (source)

If there are no word-separator characters, or if a word-separating character has a zero advance width (such as U+200B ZERO WIDTH SPACE) then the user agent must not create an additional spacing between words.

Tests

word-spacing-characters-003.xht (live test) (source)

7.2. Tracking: the letter-spacing property

Tests

This section has partial test coverage.

Missing tests:

Applies to text
Due to issue 1518, some/many tests in this section should be converted from MUST to SHOULD.
inherit lengths as absolute
For legacy reasons, a computed letter-spacing of zero yields a resolved value (getComputedStyle() return value) of normal.
However, ligatures and other font features specified via the low-level font-feature-settings property take precedence over this rule

Name:	letter-spacing
Value:	normal \| <length>
Initial:	normal
Applies to:	inline boxes and text
Inherited:	yes
Percentages:	n/a
Computed value:	an absolute length
Canonical order:	n/a
Animation type:	by computed value type

Tests

This property specifies additional spacing (commonly called tracking) between adjacent typographic character units. Letter-spacing is applied after bidi reordering and is in addition to kerning and word-spacing. [CSS-WRITING-MODES-4] [CSS-FONTS-3] Depending on the justification rules in effect, user agents may further increase or decrease the space between typographic character units in order to justify text.

Tests

Values have the following meanings:

normal

No additional spacing is applied. Computes to zero.

Tests

letter-spacing-100.xht (live test) (source)

<length>

Specifies additional spacing between typographic character units. Values may be negative, but there may be implementation-dependent limits.

Tests

tab-size-spacing-001.html (live test) (source)

For legacy reasons, a computed letter-spacing of zero yields a resolved value (getComputedStyle() return value) of normal.

For the purpose of letter-spacing, each consecutive run of atomic inlines (such as images and inline blocks) is treated as a single typographic character unit.

Tests

letter-spacing-204.html (live test) (source)

Letter-spacing must not be applied at the beginning of a line. Whether letter-spacing is applied at the end of a line is undefined in this level.

Tests

When letter-spacing is not applied at the beginning or end of a line, text always fits flush with the edge of the block.

p { letter-spacing: 1em; }

<p>abc</p>

a　b　c

UAs therefore really should not [RFC6919] append letter spacing to the right or trailing edge of a line:

a　b　c　

Letter spacing between two typographic character units effectively “belongs” to the innermost element that contains the two typographic character units: the total letter spacing between two adjacent typographic character units (after bidi reordering) is specified by and rendered within the innermost element that contains the boundary between the two typographic character units. However, the UA may instead attach letter-spacing at element boundaries to one or the other typographic character unit using the letter-spacing value pertaining to its containing element.

Note: This secondary behavior is permitted in this level due to Web-compat concerns.

Tests

An inline box is expected to only include letter spacing between characters completely contained within that element, thus excluding letter spacing on the right or trailing edge of the element:

p { letter-spacing: 1em; }

<p>a<span>bb</span>c</p>

a　b　b　c

Consequently a given value of letter-spacing is expected to only affect the spacing between characters completely contained within the element for which it is specified:

p    { letter-spacing: 1em; }
span { letter-spacing: 2em; }

<p>a<span>bb</span>c</p>

a　b　　b　c

This further implies that applying letter-spacing to an element containing only a single character has no effect on the rendered result:

p    { letter-spacing: 1em; }
span { letter-spacing: 2em; }

<p>a<span>b</span>c</p>

a　b　c

Since letter spacing is inserted after RTL reordering, the letter spacing applied to the inner span below likewise has no effect, since after reordering the "c" doesn’t end up next to "א":

p    { letter-spacing: 1em; }
span { letter-spacing: 2em; }

<!-- abc followed by Hebrew letters alef (א), bet (ב) and gimel (ג) -->
<!-- Reordering will display these in reverse order. -->
<p>ab<span>cא</span>בג</p>

a　b　c　א　ב　ג

Letter spacing ignores invisible zero-width formatting characters (such as those from the Unicode Cf category). Spacing must be added as if those characters did not exist in the document.

Tests

For example, letter-spacing applied to AB is identical to AB, regardless of where any element boundaries might fall.

When the effective spacing between two characters is not zero (due to either justification or a non-zero value of letter-spacing), user agents should not apply optional ligatures, i.e. those that are not defined as required for fundamentally correct glyph shaping. However, ligatures and other font features specified via the low-level font-feature-settings property take precedence over this rule. See CSS Fonts Module Level 3 § feature-precedence.

Tests

For example, if the word “filial” is letter-spaced, an “fi” ligature should not be used as it will prevent even spacing of the text.

filial vs ﬁlial

Note: In OpenType, required ligatures are expected to be associated to the rlig feature. All other ligatures are therefore considered optional. In some cases, however, UA or platform heuristics apply additional ligatures in order to handle broken fonts; this specification does not define or override such exceptional handling.

7.2.1. Cursive Scripts

Tests

This section lacks tests. Not sure automated tests are possible.

If it is able, the UA may apply letter spacing to cursive scripts by translating the total extra space to be distributed to a run of such letters into some form of cursive elongation (or compression, for negative tracking values) for that run that results in an equivalent total expansion (or compression) of the run. Otherwise, if the UA cannot expand text from a cursive script without breaking its cursive connections, it must not apply spacing between any pair of that script’s typographic letter units at all (effectively treating each word as a single typographic letter unit for the purpose of letter-spacing). Both cases will result in an effective spacing of zero between such letters; however the former will preserve the sense of stretching out the text.

Below are some appropriate and inappropriate examples of spacing out Arabic text.

	—	Original text
	BAD	Even distribution of space between each letter. Notice this breaks cursive joins!
	OK	Distributing ∑`letter-spacing` by typographically-appropriate cursive elongation. The resulting text is as long as the previous evenly-spaced example.
	OK	Suppressing letter-spacing between Arabic letters. Notice letter-spacing is nonetheless applied to non-Arabic characters (like spaces).
	BAD	Applying letter-spacing only between non-joined letters. This distorts typographic color and obfuscates word boundaries.

Note: Proper cursive elongation or compression of a text can vary depending on the script, typeface, language, location within a word, location within a line, implementation complexity, font capabilities, and calligraphic preferences, and may not be possible in certain cases at all. It may involve the use of shortening ligatures, swash variants, contextual forms, elongation glyphs such as U+0640 ـ ARABIC TATWEEL, or other microtypography. It is outside the scope of CSS to define rules for these effects. Authors should avoid applying letter-spacing to cursive scripts unless they are prepared to accept non-interoperable results.

7.3. Shaping Across Element Boundaries

Tests

This section has good test coverage.

Text shaping must be broken at inline box boundaries when any of the following are true for any box whose boundary separates the two typographic character units:

Any of margin/border/padding separating the two typographic character units in the inline axis is non-zero.
Tests
vertical-align is not baseline.
Tests
- boundary-shaping-002.html (live test) (source)
- boundary-shaping-006.html (live test) (source)
The boundary is a bidi isolation boundary.
Tests

Text shaping must not be broken across inline box boundaries when there is no effective change in formatting, or if the only formatting changes do not affect the glyphs (as in applying text decoration).

Tests

Text shaping should not be broken across inline box boundaries otherwise, if it is reasonable and possible for that case given the limitations of the font technology.

Tests

An example of reasonable and possible shaping across boundaries is Arabic shaping: in many systems this is performed by the font engine, allowing the font to provide variant glyphs with potentially very sophisticated contextual shaping. It’s not generally possible to rely on this system across a font change unless the font engine has an API to provide context, but it is straightforward and therefore quite reasonable for an engine to work around this limitation by, for example, using the zero-width-joiner (U+200D) or zero-width-non-joiner (U+200C) as appropriate to solicit the correct choice of initial/medial/final/isolated glyph.

An example of possible but not reasonable shaping across boundaries is handling a font that is sensitive to 20 characters of context on either side to choose its glyphs: passing all the text before and after the string in question, even through multiple inline boundaries with formatting changes, is complicated. The UA could handle such cases, but is not required to, as they are not typical or fundamentally required by any modern writing system.

An example of impossible shaping across boundaries is a change in font weight partway through the word “and” in a font where a ligature would replace all three letters of the word “and” with an ampersand glyph (“&”).

8. Edge Effects

Tests

Tests only needed in subsections.

Edge effects control the indentation of lines with respect to other lines in the block (text-indent) and how content is measured at the start and end edges of a line (hanging-punctuation).

8.1. First Line Indentation: the text-indent property

Tests

This section has adequate test coverage.

Name:	text-indent
Value:	[ <length-percentage> ] && hanging? && each-line?
Initial:	0
Applies to:	block containers
Inherited:	yes
Percentages:	refers to block container’s own inline-axis inner size
Computed value:	computed <length-percentage> value, plus any specified keywords
Canonical order:	per grammar
Animation type:	by computed value type

Tests

This property specifies the indentation applied to lines of inline content in a block. The indent is treated as a margin applied to the start edge of the line box.

Tests

Unless otherwise specified by the each-line and/or hanging keywords, only lines that are the first formatted line of an element are affected. [CSS-PSEUDO-4] For example, the first line of an anonymous block box is only affected if it is the first child of its parent element.

Tests

text-indent-with-absolute-pos-child.html (live test) (source)

Values have the following meanings:

<length>

Gives the amount of the indent as an absolute length.

Tests

<percentage>

Gives the amount of the indent as a percentage of the block container’s own logical width.

Tests

Percentages must be treated as 0 for the purpose of calculating intrinsic size contributions, but are always resolved normally when performing layout.

Tests

Note: This can lead to the element overflowing. It is not recommended to use percentage indents and intrinsic sizing together.

each-line

Indentation affects the first line of each block container and each line after a forced line break (but not lines after a soft wrap break).

Tests

text-indent-each-line-hanging.html (live test) (source)

hanging

Inverts which lines are affected.

Tests

text-indent-each-line-hanging.html (live test) (source)

If text-align is start and text-indent is 5em in left-to-right text with no floats present, then first line of text will start 5em into the block:

     Since CSS1 it has been possible to
indent the first line of a block element
5em by setting the 'text-indent' property 
to '5em'.

If we add the hanging keyword, then the first line will start flush, but other lines will be indented 5em:

In CSS3 we can instead indent all other
     lines of the block element by 5em
     by setting the 'text-indent' property
     to 'hanging 5em'.

Since the text-indent property only affects the “first formatted line”, a line after a forced break will not be indented.

   For example, in the middle of
this paragraph is an equation,
which is centered:
             x + y = z
The first line after the equation
is flush (else it would look like
we started a new paragraph).

However, sometimes (as in poetry or code), it is appropriate to indent each line that happens to be long enough to wrap. In the following example, text-indent is given a value of 3em hanging each-line, giving the third line of the poem a hanging indent where it soft-wraps at the block’s right boundary:

In a short line of text
There need be no wrapping,
But when we go on and on and on  
   and on,
Sometimes a soft break
Can help us stay on the page.

Note: Since the text-indent property inherits, when specified on a block element, it will affect descendant inline-block elements. For this reason, it is often wise to specify text-indent: 0 on elements that are specified display: inline-block.

8.2. Hanging Glyphs

Tests

Test coverage TBD. Partly tested through § 8.2.1 Hanging Punctuation: the hanging-punctuation property partly through § 4.1.2 Phase II: Trimming and Positioning.

When a glyph at the start or end edge of a line hangs, it is not considered when measuring the line’s contents for fit, alignment, or justification. Depending on the line’s alignment/justification, this can result in the mark being placed outside the line box. The hanging glyph is also not taken into account when computing intrinsic sizes (min-content size and max-content size), and any sizes derived thereof. (The interaction of this measurement and kerning is currently UA-defined; the CSSWG welcomes advice on this point.)

Tests

A hanging glyph is still enclosed inside its parent inline box and still participates in text justification: its character advance is just not measured when determining how much content fits on the line, how much the line’s contents need to be expanded or compressed for justification, or how to position the content within the line box for text alignment. Effectively, the hanging glyph character advance is re-interpreted as an additional negative margin on the affected edge of its parent inline box; the line is otherwise laid out as usual. An overflowing hanging glyph should typically be considered ink overflow so as to avoid creating unnecessary scrollbars, but the UA may treat it as scrollable overflow when the content is editable or in other circumstances where treating it as scrollable overflow would be useful to the user. [CSS-OVERFLOW-3]

Tests

In some cases, a glyph at the end of a line can conditionally hang: it hangs only if it does not otherwise fit in the line prior to justification. It is not considered when measuring the line’s contents for fit; however, any part of it that does not fit is considered to hang. Glyphs that conditionally hang are not taken into account when computing min-content sizes and any sizes derived thereof, but they are taken into account for max-content sizes and any sizes derived thereof.

Tests

Non-zero inline-axis borders or padding between a hangable glyph and the edge of the line prevent the glyph from hanging. For example, a period at the end of an inline box with end padding does not hang at the end edge of a line.

Multiple adjacent glyphs can hang together, however specific limits on how many are allowed to hang may be specified (e.g. at most one punctuation character may hang at each edge of the line).

8.2.1. Hanging Punctuation: the hanging-punctuation property

Tests

This section has spotty test coverage. All values have tests.

Missing tests:

No test of Animation type.
Applies to text
Affects intrinsic sizing
each value has a test, and checks with some characters, but there isn’t a test for every relevant unicode character
it is not considered when measuring the line’s contents for […] alignment
it is not considered when measuring the line’s contents for […] justification
Non-zero inline-axis borders or padding between a hangable mark and the edge of the line prevent the mark from hanging
At most one punctuation character may hang at each edge of the line.
should be treated as ink overflow

Name:	hanging-punctuation
Value:	none \| [ first \|\| [ force-end \| allow-end ] \|\| last ]
Initial:	none
Applies to:	text
Inherited:	yes
Percentages:	n/a
Computed value:	specified keyword(s)
Canonical order:	per grammar
Animation type:	discrete

Tests

This property determines whether a punctuation mark, if one is present, hangs and may be placed outside the line box (or in the indent) at the start or at the end of a line of text.

Note: If there is not sufficient padding on the block container, hanging-punctuation can trigger overflow.

Values have the following meanings:

none

No punctuation character is made to hang.

first

An opening bracket, quote, or ideographic space at the start of the first formatted line of an element hangs. This applies to all characters in the Unicode categories Ps, Pf, Pi plus the ASCII quote marks U+0027 ' APOSTROPHE and U+0022 " QUOTATION MARK and the IDEOGRAPHIC SPACE U+3000.

Tests

last

A closing bracket or quote at the end of the last formatted line of an element hangs. This applies to all characters in the Unicode categories Pe, Pf, Pi plus the ASCII quote marks U+0027 ' APOSTROPHE and U+0022 " QUOTATION MARK.

Tests

hanging-punctuation-last-001.xht (live test) (source)

force-end

A stop or comma at the end of a line hangs.

Tests

hanging-punctuation-force-end-001.xht (live test) (source)

allow-end

A stop or comma at the end of a line conditionally hangs.

Tests

hanging-punctuation-allow-end-001.xht (live test) (source)

At most one punctuation character may hang at each edge of the line.

Stops and commas allowed to hang include:

U+002C	,	COMMA
U+002E	.	FULL STOP
U+060C	،	ARABIC COMMA
U+06D4	۔	ARABIC FULL STOP
U+3001	、	IDEOGRAPHIC COMMA
U+3002	。	IDEOGRAPHIC FULL STOP
U+FF0C	，	FULLWIDTH COMMA
U+FF0E	．	FULLWIDTH FULL STOP
U+FE50	﹐	SMALL COMMA
U+FE51	﹑	SMALL IDEOGRAPHIC COMMA
U+FE52	﹒	SMALL FULL STOP
U+FF61	｡	HALFWIDTH IDEOGRAPHIC FULL STOP
U+FF64	､	HALFWIDTH IDEOGRAPHIC COMMA

The UA may include other characters as appropriate.

Note: The CSS Working Group would appreciate if UAs including other characters would inform the working group of such additions.

The allow-end and force-end are two variations of hanging punctuation used in East Asia.

p {
  text-align: justify;
  hanging-punctuation: allow-end;
}

p {
  text-align: justify;
  hanging-punctuation: force-end;
}

The punctuation at the end of the first line for allow-end does not hang, because it fits without hanging. However, if force-end is used, it is forced to hang. The justification measures the line without the hanging punctuation. Therefore when the line is expanded, the punctuation is pushed outside the line.

8.3. Bidirectionality and Line Boxes

Tests

This section mostly lacks tests.

The start and end sides of a line box are determined by the inline base direction of the line box. Although they usually match, the inline base direction of a line box is distinct from the inline base direction of the containing block or the bidi paragraph. The line box’s inline base direction affects text-align-all, text-align-last, text-indent, and hanging-punctuation—i.e. the position and alignment of its contents with respect to its edges. It does not affect the formatting or ordering of inline content (which is controlled by the Unicode Bidirectional Algorithm as applied by CSS Writing Modes [UAX9] [CSS-WRITING-MODES-4]).

In most cases, a line box’s inline base direction is given by its containing block’s computed direction. However, if its containing block has unicode-bidi: plaintext [CSS-WRITING-MODES-4]:

If the bidi paragraph to which the line box belongs (that is, the bidi paragraph for which the line box holds content) has strong directionality, the line box’s inline base direction is that direction.
Tests
- bidi-lines-001.html (live test) (source)
- bidi-lines-002.html (live test) (source)
If the line box is empty (i.e. contains no atomic inlines or characters other than the newline character, if any) or otherwise has no strong directionality (contains only weak or neutral characters), its inline base direction is taken from the preceding line box (if any), or, if this is the first line box in the containing block, from the direction property of the containing block. (This can result in an RTL line box whose contents have an LTR base direction.)
Tests
- bidi-lines-002.html (live test) (source)

In the following example, assuming the <block> is a start-aligned preformatted block (display: block; white-space: pre; text-align: start), every other line is right-aligned:

<block style="unicode-bidi: plaintext">
français
فارسی
français
فارسی
français
فارسی
</block>

Because neutral characters (such as punctuation) and isolated runs are skipped when finding the inline base direction of a plaintext bidi paragraph, the line box in the following example will be left-to-right (and thus left-aligned given text-align: start), as dictated by the first strong character, ‘h’:

<para style="display: block; direction: rtl; unicode-bidi:plaintext">
“<quote style="unicode-bidi:plaintext">שלום!</quote>”, they said.
</para>

<textarea style="direction: rtl; unicode-bidi:plaintext">

Hello!

</textarea>

Because of unicode-bidi: plaintext, the “Hello!” is typeset LTR (i.e. with the exclamation mark on the right side) and left-aligned, ignoring the containing block’s RTL direction. This makes the empty line following it LTR as well, which means that a caret on that line should appear at its left edge. The empty first line, however, is right-aligned: having no preceding line, it assumes the RTL direction of its containing block.

Appendix A: Text Processing Order of Operations

Tests

Tests probably not needed for this section, as it is exercised through the rest of the specification.

This appendix is normative.

The following list defines the order of text operations. (Implementations are not bound to this order as long as the resulting layout is the same.)

white space processing part I (pre-wrapping)
text transformation
text combination [CSS-WRITING-MODES-4]
text orientation [CSS-WRITING-MODES-4]
text wrapping while applying per line:
justification (which may affect glyph selection and/or text wrapping, looping back into that step)
text alignment

Tests

letter-spacing-bidi-003.xht (live test) (source)

Appendix B: Conversion to Plaintext

Tests

This section lacks tests.

This appendix is normative for the purpose of plaintext copy-paste operations.

When a CSS-rendered document is converted to a plaintext format, it is expected that:

The text-transform property has no effect.
§ 4.1.1 Phase I: Collapsing and Transformation is applied and any sequence of collapsible white space at the beginning of a block or immediately following a forced line break is removed.

Appendix C: Default UA Stylesheet

Tests

Tests not needed for this section.

This appendix is informative, and is to help UA developers to implement a default stylesheet for HTML, but UA developers are free to ignore or modify as appropriate.

/* make option elements align together */
option { text-align: match-parent; }

Appendix D: Scripts and Spacing

Tests

Tests not needed for this section: these are definitions, they get tested through their application, not by themselves.

This appendix is normative.

Typographic behavior varies somewhat by language, but varies drastically by writing system. This appendix categorizes some common scripts in Unicode 6.0 according to their justification and spacing behavior. Category descriptions are descriptive, not prescriptive; the determining factor is the prioritization of justification opportunities.

block scripts: CJK and by extension all Wide characters (see East Asian Width [UAX11]). The following Unicode scripts are included: Bopomofo, Han, Hangul, Hiragana, Katakana, and Yi. Characters of the East Asian Width property Wide and Fullwidth are also included, but Ambiguous characters are included only if the writing system is Chinese, Korean, or Japanese.
clustered scripts: Clustered scripts have discrete units and break only at word boundaries, but do not use visible word separators. They prioritize stretching spaces, but comfortably admit inter-character spacing for justification. The clustered scripts include, but are not limited to, the following Unicode scripts: Khmer, Lao, Myanmar, New Tai Lue, Tai Le, Tai Tham, Tai Viet, Thai
cursive scripts: Cursive scripts do not admit gaps between their letters for either justification or letter-spacing. The following Unicode scripts are included: Arabic, Hanifi Rohingya, Mandaic, Mongolian, N’Ko, Phags Pa, Syriac
Note: Indic scripts with baseline connectors (such as Devanagari and Gujarati) are not considered cursive scripts, and do admit such gaps between typographic character units. See Indic Layout Requirements. [ILREQ]

User agents should update this list as they update their Unicode support to handle as-yet-unencoded cursive scripts in future versions of Unicode, and are encouraged to ask the CSSWG to update this spec accordingly.

Appendix E: Characters and Properties

Tests

This section lacks tests.

This appendix is normative.

Unicode defines four code point-level properties that are referenced in CSS typesetting:

East Asian width property: Defined in Unicode Standard Annex #11 [UAX11] and given as the East_Asian_Width property in the Unicode Character Database [UAX44].
general category: Defined in Unicode Standard Annex #44 [UAX44] and given as the General_Category property in the Unicode Character Database [UAX44].
script property: Defined in Unicode Standard Annex #24 [UAX24] and given as the Script property in the Unicode Character Database [UAX44]. (UAs must include any ScriptExtensions.txt assignments in this mapping.)
Vertical Orientation: Defined in Unicode Standard Annex #50 [UAX50] as the Vertical_Orientation property in the Unicode Character Database [UAX44].

Unicode defines properties for individual code points, but sometimes it is necessary to determine the properties of a typographic character unit. For the purposes of CSS Text, the properties of a typographic character unit are given by the base character of its first grapheme cluster—except in two cases:

Grapheme clusters formed with an Enclosing Mark (Me) of the Common script are considered to be Other Symbols (So) in the Common script. They are assumed to have the same Unicode properties as the replacement character (U+FFFD).
Grapheme clusters formed with a Space Separator (Zs) as the base are considered to be Modifier Symbols (Sk). They are assumed to have the same East Asian Width property as the base, but take their other properties from the first combining character in the sequence.

Appendix F: Identifying the Content Writing System

Tests

This section has partial test coverage. Each of the various properties that take the content language into account is tested, except tested on text-justification:auto, but probably not testable anyway.

Missing tests:

if the writing system to specified to be one of the Hant, Hans, Hani, Hanb, or Bopo ISO15924 codes, then the writing system is Chinese.
if the writing system to specified to be one of the Jpan, Hira ISO15924 codes, then the writing system is Japanese.
if the writing system to specified to be one of the Kore, Hang, or Jamo ISO15924 codes, then the writing system is Korean.

This appendix is normative.

While most languages have a preferred writing system, some have multiple, and most can also be transcribed into one or more foreign writing systems. As a common example, most languages have at least one Latin transcription, and can thus be written in the Latin writing system. Transcribed texts typically adopt the typographic conventions of the writing system: for example Japanese “romaji” and Chinese Pinyin use Latin letters and word spaces, and follow Latin line-breaking and justification practices accordingly. As another example, historical ideographic Korean (ko-Hani) does not use word spaces, and should therefore be typeset similar to Chinese rather than modern Korean.

In HTML or any other document language using BCP47 tags for identifying languages to declare the content language, authors can disambiguate or indicate the use of an atypical writing system with script subtags. [BCP47] For example, to indicate use of the Latin writing system for languages which don’t natively use it, the -Latn script subtag can be added, e.g. ja-Latn for Japanese romaji. Other subtags exist for other writing systems, see ISO’s Code for the Representation of Names of Scripts and the ISO15924 script tag registry. [ISO15924]

Some common/historical examples of using BCP47 tags with script subtags:

zh-Latn: Chinese, written in Latin transcription.
ko-Hani: Korean, written in Hanja (Chinese ideographic characters).
tr-Arab: Turkish, written in Arabic script.
mn-Cyrl: Mongolian, written in Cyrillic.
mn-Mong: Mongolian, written in traditional Mongolian script.

However, BCP47 script subtags are not typically used (and are in fact discouraged) for languages strongly associated with a single writing system: instead that writing system is expected to be implied when no other is specified. [BCP47] IANA maintains a database of various languages’ most common writing system via the Suppress-Script field in its language subtag registry for this purpose.

Note: More advice on language tagging can be found in the Internationalization Working Group’s “Language tags in HTML and XML” and “Choosing a Language Tag”.

When no writing system is explicitly indicated, UAs should assume the most common writing system of the declared content language for language-sensitive typographic behaviors such as line-breaking or justification. However, UAs must not assume that writing system if the author has explicitly declared a different one. If the UA has no language-specific knowledge of a particular language and writing system combination, it must use the typographic conventions of the declared writing system (assuming the conventions of a different language if necessary), not the conventions of the declared language in an assumed writing system, which would be inappropriate to the declared writing system.

Tests

The full correspondence between languages and their most common writing systems is out of scope for this document. However, user agents must assume at least the following:

If the content language is Chinese and the writing system is unspecified, or for any content language if the writing system to specified to be one of the Hant, Hans, Hani, Hanb, or Bopo ISO script codes, then the writing system is Chinese.
If the content language is Japanese and the writing system is unspecified, or for any content language if the writing system to specified to be one of the Jpan, Hrkt, Hira, or Kana ISO script codes, then the writing system is Japanese.
Tests
- writing-system-line-break-002.html (live test) (source)
- writing-system-segment-break-001.html (live test) (source)
If the content language is Korean and the writing system is unspecified, or for any content language if the writing system to specified to be one of the Kore, Hang, or Jamo ISO script codes, then the writing system is Korean.
The writing system is only considered to be unknown if the content language itself is unknown, or if it explicitly indicates an unknown writing system.
Note: Mere omission of the writing system information when the content language is declared means the that the writing system is implied, not unknown.

Appendix G: Small Kana Mappings

Tests

This section has good test coverage, through the text-transform property.

This appendix is normative.

Small Kana Map to Full-size Kana
Small	Full-size
ぁ U+3041	あ U+3042
ぃ U+3043	い U+3044
ぅ U+3045	う U+3046
ぇ U+3047	え U+3048
ぉ U+3049	お U+304A
ゕ U+3095	か U+304B
ゖ U+3096	け U+3051
𛄲 U+1B132	こ U+3053
っ U+3063	つ U+3064
ゃ U+3083	や U+3084
ゅ U+3085	ゆ U+3086
ょ U+3087	よ U+3088
ゎ U+308E	わ U+308F
𛅐 U+1B150	ゐ U+3090
𛅑 U+1B151	ゑ U+3091
𛅒 U+1B152	を U+3092
ァ U+30A1	ア U+30A2
ィ U+30A3	イ U+30A4
ゥ U+30A5	ウ U+30A6
ェ U+30A7	エ U+30A8
ォ U+30A9	オ U+30AA
ヵ U+30F5	カ U+30AB
ㇰ U+31F0	ク U+30AF
ヶ U+30F6	ケ U+30B1
𛅕 U+1B155	コ U+30B3
ㇱ U+31F1	シ U+30B7
ㇲ U+31F2	ス U+30B9
ッ U+30C3	ツ U+30C4
ㇳ U+31F3	ト U+30C8
ㇴ U+31F4	ヌ U+30CC
ㇵ U+31F5	ハ U+30CF
ㇶ U+31F6	ヒ U+30D2
ㇷ U+31F7	フ U+30D5
ㇸ U+31F8	ヘ U+30D8
ㇹ U+31F9	ホ U+30DB
ㇺ U+31FA	ム U+30E0
ャ U+30E3	ヤ U+30E4
ュ U+30E5	ユ U+30E6
ョ U+30E7	ヨ U+30E8
ㇻ U+31FB	ラ U+30E9
ㇼ U+31FC	リ U+30EA
ㇽ U+31FD	ル U+30EB
ㇾ U+31FE	レ U+30EC
ㇿ U+31FF	ロ U+30ED
ヮ U+30EE	ワ U+30EF
𛅤 U+1B164	ヰ U+30F0
𛅥 U+1B165	ヱ U+30F1
𛅦 U+1B166	ヲ U+30F2
𛅧 U+1B167	ン U+30F3
ｧ U+FF67	ｱ U+FF71
ｨ U+FF68	ｲ U+FF72
ｩ U+FF69	ｳ U+FF73
ｪ U+FF6A	ｴ U+FF74
ｫ U+FF6B	ｵ U+FF75
ｯ U+FF6F	ﾂ U+FF82
ｬ U+FF6C	ﾔ U+FF94
ｭ U+FF6D	ﾕ U+FF95
ｮ U+FF6E	ﾖ U+FF96

Tests

Privacy Considerations

Tests

Tests not needed for this section.

This specification leaks the user’s installed hyphenation and line-breaking dictionaries.

Security Considerations

Tests

Tests not needed for this section.

This specification introduces no new security considerations.

Acknowledgements

Tests

Tests not needed for this section.

This specification would not have been possible without the help from: Addison Phillips, Aharon Lanin, Alan Stearns, Ambrose Li, Arnold Schrijver, Arye Gittelman, Ayman Aldahleh, Ben Errez, Bert Bos, Chris Lilley, Chris Pratley, Chris Thrasher, Chris Wilson, Dave Hyatt, David Baron, Emilio Cobos Álvarez, Eric LeVine, Etan Wexler, Frank Tang, Håkon Wium Lie, IM Mincheol, Ian Hickson, James Clark, Javier Fernandez, John Daggett, Jonathan Kew, Ken Lunde, Laurie Anna Edlund, Marcin Sawicki, Martin Dürst, Martin Heijdra, Masafumi Yabe, Masayasu Ishikawa, Michael Jochimsen, Michel Suignard, Mike Bemford, Myles Maxfield, Nat McCully, Paul Nelson, Rahul Sonnad, Richard Ishida, Shinyu Murakami, Stephen Deach, Steve Zilles, Takao Suzuki, Tantek Çelik, Xidorn Quan, Yaniv Feinberg.

Changes

Recent Changes

The following normative changes have been made since the September 2023 Candidate Recommendation Draft:

Corrected the Computed Value line for text-align-last. (Issue 7331)
Disambiguate soft wrap opportunities around replaced elements. (Issue 9964)

For soft wrap opportunities defined by the boundary between two characters or atomic inlines , the white-space property on the nearest common ancestor of the two characters controls breaking;
Tests

The following normative changes have been made since the February 2023 Candidate Recommendation Draft.

Update Appendix G: Small Kana Mappings to Unicode 15.0. (Issue 8442)
Tests
- text-transform-full-size-kana-008.html (live test) (source)
Non-tailorable Unicode line breaking controls other than NBSP take precedence over our rule about atomic inlines. (Issue 8972)

For Web-compatibility there is a soft wrap opportunity before and after each replaced element or other atomic inline, even when adjacent to a character that would normally suppress them, ~~such as~~ including U+00A0 NO-BREAK SPACE. However, with the exception of U+00A0 NO-BREAK SPACE, there must be no soft wrap opportunity between atomic inlines and adjacent characters belonging to the Unicode GL, WJ, or ZWJ line breaking classes. [UAX14]
Tests

The following normative changes have been made since the December 2020 Candidate Recommendation.

Allow hanging-punctuation: first to hang U+300 IDEOGRAPHIC SPACE in order to accommodate plaintext indentation habits. (Issue 2462)

first
An opening bracket , or quote , or ideographic space at the start of the first formatted line of an element hangs. This applies to all characters in the Unicode categories Ps, Pf, Pi plus the ASCII quote marks U+0027 ' APOSTROPHE and U+0022 " QUOTATION MARK plus the ASCII quote marks U+0027 ' APOSTROPHE and U+0022 " QUOTATION MARK and the IDEOGRAPHIC SPACE U+3000 .
Tests
- hanging-punctuation-first-002.html (live test) (source)
Define that distribute computes to inter-character, rather than merely behave the same; allow distribute to be implemented as a legacy value alias, since this is easier for some engines and does not matter for compatibility. (Issue 6156, Issue 7322)
Tests
- text-justify-computed-legacy.html (live test) (source)
Clarify that language-specific hyphenation rules also apply to explicit hyphenation opportunities. (Issue 5973)

Words are only hyphenated where there are characters inside the word that explicitly suggest hyphenation opportunities. The UA must use the appropriate language-specific hyphenation character(s) and should apply any appropriate spelling changes just as for automatic hyphenation at the same point.
Tests
Define match-parent on the root element to compute to start instead of computing against the principal writing mode. (Issue 6542)
Tests
- text-align-match-parent-root-logical.html (live test) (source)
Make authoring advice regarding text-transform a normative recommendation. (Issue 8279)

~~Note: The text-transform property only affects the presentation layer; correct casing for semantic purposes is expected to be represented in the source document.~~

Advisement: Authors must not rely on text-transform for semantic purposes; rather the correct casing and semantics should be encoded in the source document text and markup.
Tests

This is an authoring requirement, tests not needed

In addition there have been some minor editorial fixes.

Older Changes

See also earlier list of changes covering the 2020 and 2019 Working Drafts prior to that Candidate Recommendation and the Disposition of Comments covering all comments between 2013 and 2020.

Conformance

Document conventions

Conformance requirements are expressed with a combination of descriptive assertions and RFC 2119 terminology. The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in the normative parts of this document are to be interpreted as described in RFC 2119. However, for readability, these words do not appear in all uppercase letters in this specification.

All of the text of this specification is normative except sections explicitly marked as non-normative, examples, and notes. [RFC2119]

Examples in this specification are introduced with the words “for example” or are set apart from the normative text with class="example", like this:

Informative notes begin with the word “Note” and are set apart from the normative text with class="note", like this:

Advisements are normative sections styled to evoke special attention and are set apart from other normative text with <strong class="advisement">, like this: UAs MUST provide an accessible alternative.

Conformance classes

A style sheet is conformant to this specification if all of its statements that use syntax defined in this module are valid according to the generic CSS grammar and the individual grammars of each feature defined in this module.

A renderer is conformant to this specification if, in addition to interpreting the style sheet as defined by the appropriate specifications, it supports all the features defined by this specification by parsing them correctly and rendering the document accordingly. However, the inability of a UA to correctly render a document due to limitations of the device does not make the UA non-conformant. (For example, a UA is not required to render color on a monochrome monitor.)

An authoring tool is conformant to this specification if it writes style sheets that are syntactically correct according to the generic CSS grammar and the individual grammars of each feature in this module, and meet all other conformance requirements of style sheets as described in this module.

Partial implementations

So that authors can exploit the forward-compatible parsing rules to assign fallback values, CSS renderers must treat as invalid (and ignore as appropriate) any at-rules, properties, property values, keywords, and other syntactic constructs for which they have no usable level of support. In particular, user agents must not selectively ignore unsupported component values and honor supported values in a single multi-value property declaration: if any value is considered invalid (as unsupported values must be), CSS requires that the entire declaration be ignored.

Implementations of Unstable and Proprietary Features

Non-experimental implementations

Once a specification reaches the Candidate Recommendation stage, non-experimental implementations are possible, and implementors should release an unprefixed implementation of any CR-level feature they can demonstrate to be correctly implemented according to spec.

To establish and maintain the interoperability of CSS across implementations, the CSS Working Group requests that non-experimental CSS renderers submit an implementation report (and, if necessary, the testcases used for that implementation report) to the W3C before releasing an unprefixed implementation of any CSS features. Testcases submitted to W3C are subject to review and correction by the CSS Working Group.

Further information on submitting testcases and implementation reports can be found from on the CSS Working Group’s website at http://www.w3.org/Style/CSS/Test/. Questions should be directed to the public-css-testsuite@w3.org mailing list.

CSS Text Module Level 3

Abstract

Status of this document

1. Introduction

1.1. Module Interactions

1.2. Value Definitions

1.3. Languages and Typesetting

1.4. Characters and Letters

1.5. Text Processing

2. Transforming Text

2.1. Case Transforms: the text-transform property

2.1.1. Mapping Rules

2.1.2. Order of Operations

3. White Space and Wrapping: the white-space property

4. White Space Processing & Control Characters

4.1. The White Space Processing Rules

4.1.1. Phase I: Collapsing and Transformation

4.1.2. Phase II: Trimming and Positioning

4.1.3. Segment Break Transformation Rules

4.2. Tab Character Size: the tab-size property

5. Line Breaking and Word Boundaries

5.1. Line Breaking Details

5.2. Breaking Rules for Letters: the word-break property

5.3. Line Breaking Strictness: the line-break property

5.4. Hyphenation: the hyphens property

5.5. Overflow Wrapping: the overflow-wrap/word-wrap property

5.6. Shaping Across Intra-word Breaks

6. Alignment and Justification

6.1. Text Alignment: the text-align shorthand

6.2. Default Text Alignment: the text-align-all property

6.3. Last Line Alignment: the text-align-last property

6.4. Justification Method: the text-justify property

6.4.1. Expanding and Compressing Text

6.4.2. Handling Symbols and Punctuation

6.4.3. Unexpandable Text

6.4.4. Cursive Scripts

6.4.5. Minimum Requirements for auto Justification

7. Spacing

7.1. Word Spacing: the word-spacing property

7.2. Tracking: the letter-spacing property

7.2.1. Cursive Scripts

7.3. Shaping Across Element Boundaries

8. Edge Effects

8.1. First Line Indentation: the text-indent property

8.2. Hanging Glyphs

8.2.1. Hanging Punctuation: the hanging-punctuation property

8.3. Bidirectionality and Line Boxes

Appendix A: Text Processing Order of Operations

Appendix B: Conversion to Plaintext

Appendix C: Default UA Stylesheet

Appendix D: Scripts and Spacing

Appendix E: Characters and Properties

Appendix F: Identifying the Content Writing System

Appendix G: Small Kana Mappings

Privacy Considerations

Security Considerations

Acknowledgements

Changes

Recent Changes

Older Changes

Conformance

Document conventions

Conformance classes

Partial implementations

Implementations of Unstable and Proprietary Features

Non-experimental implementations

Index

Terms defined by this specification

Terms defined by reference

References

Normative References

Informative References

Property Index