Novel moving-magnet electrodynamic feed units for small machine tools | Production Engineering Skip to main content
Springer Nature Link
Log in

Novel moving-magnet electrodynamic feed units for small machine tools

  • Machine Tool
  • Published:
Production Engineering Aims and scope Submit manuscript

Abstract

Small feed motions in the mm and cm range today are mostly realised with miniaturised leadscrew motor systems, piezo stages and moving-coil actuators. A short survey on typical properties of those existing feed units for small machine tools is given first. A simple yet powerful complement or alternative to the above-mentioned small drives are single-phase linear direct drives with moving magnets. Especially motor designs with slotted stator winding offer high force densities and good dynamics. Combination of those short-stroke motors with ball or flexure guides and with embedded position or force control resp. leads to particular compact feed units. Such modules are currently being developed at Technische Universität Dresden for applications in future small machine tools and in automation. Two different prototypes of those feed modules are presented in this paper. With travel ranges of 11 and 14 mm, resp., peak forces of 39 and 112 N resp., linear force characteristics and speeds up to 1.6 m/s they feature attractive properties. A first module with ball-guided slide already contains an integrated low-cost position sensor and embedded state space position control. A second module with flexure-guided mover is currently being extended with latter embedded control components. Due to their high compactness, force density, dynamics and modularity, the developed feed units can widely be used in future small machine tools and in automation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
¥17,985 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Japan)

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Wulfsberg JP, Grimske S, Kohrs P, Kong N (2010) Kleine Werkzeugmaschinen für kleine Werkstücke. wt Werkstattstechnik online Jahrgang 100 H.11/12, pp 886–891

  2. Smith S, Seugling R (2006) Sensor and actuator considerations for precision, small machines. Precis Eng 30(3):245–264

    Article  Google Scholar 

  3. Weck M, Brecher C (2006) Werkzeugmaschinen, Fertigungssysteme—3 : Mechatronische Systeme, Vorschubantriebe, Prozessdiagnose. 6th edn. Springer, Berlin

    Google Scholar 

  4. Trumper D, Lu X (2007) Fast tool servos: advances in precision, acceleration, and bandwidth. In: Towards synthesis of micro-/nano-systems: proceedings of the 11th international conference on precision engineering (ICPE), August 16–18, 2006, Tokyo, Japan. Springer, London, pp 11–19

  5. Tian Y, Zhang D, Shirinzadeh B (2011) Dynamic modelling of a flexure-based mechanism for ultra-precision grinding operation. Precis Eng 35(4):554–565

    Article  Google Scholar 

  6. Woronko A, Huang J, Altintas Y (2003) Piezoelectric tool actuator for precision machining on conventional CNC turning centers. Precis Eng 27(4):335–345

    Article  Google Scholar 

  7. PI-Physik Instrumente (2013) Precision linear actuators overview (piezo-motors) & electromagnetic motors, 13 Feb 2013. Available http://www.physikinstrumente.com/en/products/linear_actuator/index.php (Online)

  8. Rakuff S, Cuttino J (2009) Design and testing of a long-range, precision fast tool servo system for diamond turning. Precis Eng 33(1):18–25

    Article  Google Scholar 

  9. Jiang Y, Zhao W, Xi X, Kang X, Gu L (2012) Vibration assisted EDM of small-hole using voice coil motor. In: Proceedings of the fifth CIRP conference on high performance cutting, vol. 1, pp 645–650

  10. Bödrich T, Süßenbecker M, Lienig J (2012) Neuartige Vorschubantriebe für kleine Werkzeugmaschinen. wt Werkstattstechnik online Jahrgang 102 H. 7/8, pp 441–446

  11. Süßenbecker M, Bödrich T, Lienig J (2012) Test and comparison of different state space controllers for a small electrodynamic feed unit. In: The 13th mechatronics forum international conference, Linz, pp 163–170

  12. Bödrich T, Süßenbecker M, Lienig J (2012) Compact electrodynamic feed modules for small machine tools and automation. In: Proceedings of the ACTUATOR 2012—13th international conference on new actuators, Bremen, Germany, pp. 643–646

  13. Bödrich T (2010) Modellbasierter Entwurf von Schwingankerantrieben für Hubkolbenverdichter. Düsseldorf: Fortschritt-Berichte VDI: Reihe 21, Nr. 394. VDI

  14. Hultman L, Jack A (2003) Soft magnetic composites-materials and applications. In: Proceedings of the electric machines and drives conference, 2003. IEMDC’03, IEEE international conference, vol. 1, pp 516–522

  15. Jack A, Al-Otaibi Z, Persson M (2006) Alternative designs for oscillating linear single phase permanent magnet motors using soft magnetic composites. In Proceedings of the 2006 international conference on electrical machines and systems, Paper ID. DS4F2-07

  16. BEI Kimco Magnetics (2013) Description of voice coil actuators, 5 Feb 2013. Available http://www.beikimco.com/actuators_linear.php (Online)

Download references

Acknowledgments

The authors would like to thank the German Research Foundation (Deutsche Forschungsgemeinschaft—DFG) for funding of the presented work within the Priority Programme SPP 1476 “Small machine tools for small work pieces”.

Author information

Authors and Affiliations

  1. Institute of Electromechanical and Electronic Design, Technische Universität Dresden, 01062, Dresden, Germany

    Thomas Bödrich, Fabian Ehle, Michael Süßenbecker & Jens Lienig

Authors
  1. Thomas Bödrich
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Fabian Ehle
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Michael Süßenbecker
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jens Lienig
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Thomas Bödrich.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Bödrich, T., Ehle, F., Süßenbecker, M. et al. Novel moving-magnet electrodynamic feed units for small machine tools. Prod. Eng. Res. Devel. 7, 497–501 (2013). https://doi.org/10.1007/s11740-013-0473-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11740-013-0473-3

Keywords

Search

Navigation