Design process for adaptronic machine tools | Production Engineering
Skip to main content
Springer Nature Link
Log in

Design process for adaptronic machine tools

  • Machine Tool
  • Published:
Production Engineering Aims and scope Submit manuscript

Abstract

A consistent goal in machine tool construction is to enhance the accuracy while increasing productivity. These two design parameters are negatively coupled. Increasing the machine dynamic is realized by increasing the engine power or with a lightweight design. As the engine power grows, so do the forces generated, which then lead to static deformations and excite the structure, leading to vibrations. Within the scope of this paper, the adaptronic framework has been adapted to machine tools. The development of such an adaptronic machine tool is no trivial task, as it requires an extensive knowledge overhead across a number of different scientific fields. Though these fields are interrelated, a methodical approach which takes advantage of a standard component is presented. This approach allows the interdisciplinary knowledge barriers to be overcome.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
¥17,985 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Japan)

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Weck M (2001) Werkzeugmaschinen, Volume 5-Messtechnische Untersuchungen und Beurteilung, 6th edn. Springer Verlag, Düsseldorf

    Google Scholar 

  2. Meschke A (1995) Verbesserung des dynamischen Verhaltens von Werkzeugmaschinen durch Erhöhung der Systemdämpfung. Dissertation, Technische Universität Braunschweig, Vulkan-Verlag, Essen

  3. Torrez-Torres J, Zornemann M, Rose M (2007) Damping of structural vibrations on a circular saw-blade dummy using an adaptive hybrid electromechanical network with piezoelectric devices. Conference Proceeding: Adaptronic Congress, Göttingen

  4. Munzinger C (2007) Adaptronische Strebe zur Steifigkeitssteigerung von Werkzeugmaschinen. Doctoral Thesis, Universität Karlsruhe (TH), Karlsruhe

  5. Becker J, Gaul L (2007) Semi-active control of adaptive friction dampers for structural vibration control. Proceeding of the IMAC-XXV, Orlando, Florida, USA

  6. Carlson JD, Goncalves F (2008) Controllable fluids come of age. Conference Proceeding of Actuator 08, Messe Bremen, Bremen

  7. Loix N, Verschueren J Ph (2005) Stand-alone active damping device. Conference Proceeding: Adaptronic Congress, Göttingen

  8. Janocha H (2007) Adaptronics and smart structures. Basics, materials, design and applications. Springer-Verlag, Berlin, Heidelberg

    Google Scholar 

  9. Neumann D (2007) Adaptronics—a concept for the development of adaptive and multifunctional structures. In: Adaptronics and smart structures. Basics, materials, design, and applications, Springer-Verlag, Berlin, Heidelberg

  10. Pahl G, Beitz W (2007) Konstruktionslehre. 7. Auflage, Springer Verlag, Berlin, Heidelberg

    Google Scholar 

  11. VDI-Richtlinien: VDI 2221 (1993) Methodik zum Entwickeln und Konstruieren technischer Systeme und Produkte. Beuth Verlag, Berlin

    Google Scholar 

  12. VDI-Richtlinien: VDI 2206 (2004) Entwicklungsmethodik für mechatronische systeme. Beuth Verlag, Berlin

    Google Scholar 

  13. Simnofske M, Hesselbach J (2006) The increase of the dynamic and static stiffness of a grinding machine. Conference Proceeding: ASME IDETC/CIE 2006, Philadelphia

  14. Preumont A (2002) Vibration control of active structures: an introduction, 2nd edn. Kluwer Academic Publishers Group, Netherlands

    MATH  Google Scholar 

  15. Simnofske M, Schuller B-C, Queiroz E, Hesselbach J, Hoffmeister H-W, Guenther R (2007) Aktive Einheiten in Werkzeugmaschinen. Conference Proceeding: Adaptronic Congress, Göttingen

  16. Hanselka H, Flake M (2002) Adaptronik und Fragen zur Systemzuverlässigkeit. Adaptronic Congress, Göttingen

  17. Gawronski WK (1998) Dynamics and control of structures, A modal approach. In: Mechanical engineering series, Springer Verlag, Berlin, Heidelberg, New York

  18. Boldering A, Simnofske M, Raatz A, Hesselbach J (2008) Grinding process stabilization with active modules. Proceedings of the 7th International Conference on Motion and Vibration Control (MOVIC), München

Download references

Author information

Authors and Affiliations

  1. Institute of Machine Tools and Production Technology, Technical University Braunschweig, Langer Kamp 19b, 38106, Braunschweig, Germany

    Marc Simnofske, Annika Raatz & Jürgen Hesselbach

Authors
  1. Marc Simnofske
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Annika Raatz
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jürgen Hesselbach
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Marc Simnofske.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Simnofske, M., Raatz, A. & Hesselbach, J. Design process for adaptronic machine tools. Prod. Eng. Res. Devel. 3, 461 (2009). https://doi.org/10.1007/s11740-009-0178-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11740-009-0178-9

Keywords

Search

Navigation