Multi-plug insole design to reduce peak plantar pressure on the diabetic foot during walking | Medical & Biological Engineering & Computing Skip to main content
Springer Nature Link
Log in

Multi-plug insole design to reduce peak plantar pressure on the diabetic foot during walking

  • Original Article
  • Published:
Medical & Biological Engineering & Computing Aims and scope Submit manuscript

Abstract

There is evidence that appropriate footwear is an important factor in the prevention of foot pain in otherwise healthy people or foot ulcers in people with diabetes and peripheral neuropathy. A standard care for reducing forefoot plantar pressure is the utilization of orthotic devices such as total contact inserts (TCI) with therapeutic footwear. Most neuropathic ulcers occur under the metatarsal heads, and foot deformity combined with high localized plantar pressure, appear to be the most significant factors contributing to these ulcers. In this study, patient-specific finite element models of the second ray of the foot were developed to study the influence of TCI design on peak plantar pressure (PPP) under the metatarsal heads. A typical full contact insert was modified based on the results of finite element analyses, by inserting 4 mm diameter cylindrical plugs of softer material in the regions of high pressure. Validation of the numerical model was addressed by comparing the numerical results obtained by the finite element method with measured pressure distribution in the region of the metatarsal heads for a shoe and TCI condition. Two subjects, one with a history of forefoot pain and one with diabetes and peripheral neuropathy, were tested in the laboratory while wearing therapeutic shoes and customized inserts. The study showed that customized inserts with softer plugs distributed throughout the regions of high plantar pressure reduced the PPP over that of the TCI alone. This supports the outcome as predicted by the numerical model, without causing edge effects as reported by other investigators using different plug designs, and provides a greater degree of flexibility for customizing orthotic devices than current practice allows.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
¥17,985 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Japan)

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

Abbreviations

CT:

Computed tomography

DM:

Diabetes mellitus

FEA:

Finite element analysis

SXCT:

Spiral X-ray computed tomography

TCI:

Total contact insert

PPP:

Peak plantar pressure

References

  1. Actis RL, Ventura LB, Smith KE, Commean PK, Lott DJ, Pilgram TK, Mueller MJ (2006) Numerical simulation of the plantar pressure distribution in the diabetic foot during the push-off stance. Med Biol Eng Comput 44:653–663

    Article  Google Scholar 

  2. Ashry HR, Lavery LA, Murdoch DP, Frolich M, Lavery DC (1997) Effectiveness of diabetic insoles to reduce foot pressures. J Foot Ankle Surg 36:268–271

    Article  Google Scholar 

  3. Bus SA, Ulbrecht JS, Cavanagh PR (2004) Pressure relief and load redistribution by custom-made insoles in diabetic patients with neuropathy and foot deformity. Clin Biomech 19(6):629–638

    Article  Google Scholar 

  4. Chantelau E, Haage P (1994) An audit of cushioned diabetic footwear: relation to patient compliance. Diabet Med 11(1):114–116

    Article  Google Scholar 

  5. Chen WP, Ju CW, Tang F (2003) Effects of total contact insoles on the plantar stress distribution: a finite element analysis. Clin Biomech 18:S17–S24

    Article  Google Scholar 

  6. Cheung JTM, Phil M, Zhang M (2005) A three-dimensional finite element model of the human foot and ankle for insole design. Arch Phys Med Rehabil 88:353–358

    Article  Google Scholar 

  7. Commean PK, Mueller MJ, Smith KE, Hastings M, Klaesner J, Pilgram T, Robertson DD (2002) Reliability and validity for combined imaging and pressure assessment methods for diabetic feet. Arch Phys Med Rehabil 83(4):497–505

    Article  Google Scholar 

  8. Edmonds M., Blundell M., Morris M et al (1986) Improved survival of the diabetic foot: the role of a specialized foot clinic. Q J Med 60(232):763–771

    Google Scholar 

  9. Erdemir A, Saucerman JJ, Lemmon D, Loppnow B, Turso B, Ulbretch J S, Cavanagh PR (2005) Local pressure relief in therapeutic footwear: design guidelines from finite element models. J Biomech 38:1798–1806

    Article  Google Scholar 

  10. Gefen A (2003) Plantar soft tissue loading under the medial metatarsals in the standing diabetic foot. Med Eng Phys 25:491–499

    Article  Google Scholar 

  11. Gefen A (2003) The in vivo elastic properties of the plantar Fascia during the contact phase of walking. Foot Ankle Int 24:238–244

    Google Scholar 

  12. Gefen A, Megido-Ravid M, Itzchak Y, Arcan M (2000) Biomechanical analysis of the three-dimensional foot structure during Gait: a basic tool for clinical applications. J Biomech Eng 122:630–639

    Article  Google Scholar 

  13. Goske S, Erdemir A, Petre M, Budhabhatti S, Cavanagh PR (2005) Reduction of plantar heel pressure: insole design using finite element analysis. J Biomech 39:2363–2370

    Article  Google Scholar 

  14. Hastings MK, Commean PK, Smith KE, Pilgram TK, Mueller MJ (2003) Aligning anatomical structure from spiral X-ray computed tomography with plantar pressure data. Clin Biomech 18:877–882

    Article  Google Scholar 

  15. Jacob S, Patil MK (1999) Stress analysis in three-dimensional foot models of normal and diabetic Neuropathy. Front Med Biol Eng 9:211–227

    Google Scholar 

  16. Jacob S, Patil MK (1999) Three-dimensional foot modeling and analysis of stresses in normal and early stage Hansen’s disease with muscle paralysis. J Rehabil Res Dev 36:252–263

    Google Scholar 

  17. Lemmon D, Shiang TY, Hashmi A, Ulbrecht JS, Cavanagh PR (1997) The effect of insoles in therapeutic footwear––A finite element approach. J Biomech 30(6):615–620

    Article  Google Scholar 

  18. Lord M, Hosein R (1994) Pressure redistribution by molded inserts in diabetic footwear: a pilot study. J Rehabil Res Dev 31(3):214–221

    Google Scholar 

  19. Mueller MJ, Strube MJ (1996) Generalizability of in-shoe peak pressure measures using the f-scan system. Clin Biomech 11:159–164

    Article  Google Scholar 

  20. Mueller MJ, Lott DJ, Hastings MK, Commean PK, Smith KE, Pilgram HK (2006) Efficacy and mechanism of orthotic devices to unload metatarsal heads in people with diabetes and a history of plantar ulcers. Phys Ther 86(6):833–842

    Google Scholar 

  21. Nicolopoulos CS, Anderson EG, Solomonidis SE, Giannoudis PV (2000) Evaluation of the gait analysis FSCAN pressure system: clinical tool or toy? Foot 10:124–130

    Article  Google Scholar 

  22. Pecoraro RE, Reiber GE, Burgess EM (1990) Pathways to diabetic limb amputation. Basis for prevention. Diabetes Care 13(5):513–521

    Article  Google Scholar 

  23. Pitei DL, Lord M, Foster A, Wilson S, Watkins PJ, Edmonds ME (1999) Plantar pressures are elevated in the neuroischemic and the neuropathic diabetic foot. Diabetes Care 22(12):1966–1970

    Article  Google Scholar 

  24. Robb RA, Barillot C (1989) Interactive display and analysis of 3-D medical images. IEEE Trans Med Imaging 8(3):217–226

    Article  Google Scholar 

  25. Szabo BA, Babuska I (1991) Finite element analysis. Wiley, New York

    MATH  Google Scholar 

  26. Tsung BYS, Zhang M, Mak AFT, Wong MWN (2004) Effectiveness of insoles on plantar pressure redistribution. J Rehabil Res Dev 41(6A):767–774

    Article  Google Scholar 

  27. Yamada H (1970) Strength of Biological Materials. The William & Wilkins Company, Baltimore

    Google Scholar 

Download references

Acknowledgments

We acknowledge funding from NCMRR, NIH, RO1 HD 36895. We also acknowledge Mike Dailey, CPed CO, for fabricating orthotic devices used in this study.

Author information

Authors and Affiliations

  1. Engineering Software Research and Development, Inc., 111 West Port Plaza, Suite 825, St Louis, MO, 63146, USA

    Ricardo L. Actis & Liliana B. Ventura

  2. Program in Physical Therapy, Washington University School of Medicine, St Louis, MO, USA

    Donovan J. Lott, Mary K. Hastings & Michael J. Mueller

  3. Washington University School of Medicine, St Louis, MO, USA

    Kirk E. Smith & Paul K. Commean

Authors
  1. Ricardo L. Actis
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Liliana B. Ventura
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Donovan J. Lott
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Kirk E. Smith
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Paul K. Commean
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Mary K. Hastings
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Michael J. Mueller
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ricardo L. Actis.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Actis, R.L., Ventura, L.B., Lott, D.J. et al. Multi-plug insole design to reduce peak plantar pressure on the diabetic foot during walking. Med Biol Eng Comput 46, 363–371 (2008). https://doi.org/10.1007/s11517-008-0311-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11517-008-0311-5

Keywords

Search

Navigation