Abstract
Resistive random access memory (RRAM or ReRAM) is a non-volatile memory (NVM) technology that consumes minimal energy while offering sub-nanosecond switching. In addition, the data stability against high temperature and cycling wear is very robust, allowing new NVM applications in a variety of markets (automotive, embedded, storage, RAM). Based on sudden conduction through oxide insulators, the characteristics of RRAM technology have still yet to be fully described. In this paper, we present our current understanding of this very promising technology.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Lee H Y, Chen P S, Wu T Y, et al. Low power and high speed bipolar switching with a thin reactive Ti buffer layer in robust HfO2-based RRAM. In: IEDM 2008, 2008. 297–300
Mott N F. Metal-insulator transition. Rev Mod Phys, 1968, 40: 677–683
Wu Y, Lee B, Wong H P S. Ultra-low power Al2O3-based RRAM with 1 μA RESET current. In: VLSI-TSA 2010. 2010. 136–137
Lee H Y, Chen Y S, Chen P S, et al. Evidence and solutions of Over-RESET problem for HfOx-based resistive memory with sub-ns switching speed and high endurance. In: IEDM 2010. 460–463
Waser R. Resistive non-volatile memory devices. Microelectr Eng, 2009, 86: 1925–1928
Sata A. Resistive switching in transition metal oxides. Mater Today, 2008, 11: 28–36
Taskin A A, Lavrov A N, Ando Y. Achieving fast oxygen diffusion in perovskites by cation ordering. Appl Phy Lett, 2005, 86: 091910
Chevalier C J, Siau C H, Lim S F, et al. A 0.13 μm 64 Mb multi-layered conductive metal oxide memory. In: ISSCC2010. 2010. 260–261
Baek I G, Kim D C, Lee M J, et al. Multi-layer cross-point binary oxide resistive memory (OxRRAM) for post-NAND storage application. In: IEDM 2005. 2005. 750–753
Oh J H, Park J H, Lim Y S, et al. Full integration of highly manufacturable 512 Mb PRAM based on 90 nm technology. In: IEDM 2006. 2006
http://www.numonyx.com/EN-US/MEMORYPRODUCTS/PCM/Pages/P8P.aspx
Eliason J, Madan S, McAdams H, et al. An 8Mb 1T1C ferroelectric memory with zero cancellation and mi-cro-granularity redundancy. In: CICC 2005. 2005. 427–430
Schindler C, Thermadam S C P, Waser R, et al. Bipolar and unipolar resistive switching in Cu-doped SiO2. IEEE Trans Electr Dev, 2007, 54: 2762–2768
Guan W, Liu M, Long S, et al. On the resistive switching mechanisms of Cu/ZrO2:Cu/Pt. Appl Phys Lett, 2008, 93: 223506
Dietrich S, Angerbauer M, Ivanov M, et al. A nonvolatile 2-Mbit CBRAM memory core featuring advanced read and program control. IEEE J Solid-State Circ, 2007, 42: 839–845
Kozicki M N, Gopalan C, Balakrishnan M, et al. A low-power nonvolatile switching element based on cop-per-tungsten oxide solid electrolyte. IEEE Trans Nanotech, 2006, 5: 1–10
Thermadam S P, Bhagat S K, Alford T L, et al. Influence of Cu diffusion conditions on the switching of Cu-SiO2-based resistive memory devices. Thin Solid Films, 2009, 518: 3293–3298
Ono K, Kurotshuchi K, Fujisaki Y, et al. Resistive switching ion-plug memory for 32-nm technology node and beyond. In: SSDM 2008. 2008. 1164–1165
Jo H, Lu W. CMOS compatible nanoscale nonvolatile resistance switching memory. Nano Lett, 2008, 8: 392–397
Zhuge F, Dai W, He C L, et al. Nonvolatile resistive switching memory based on amorphous carbon. Appl Phys Lett, 2010, 96: 163505
Kayashima S, Takahashi K, Motoyama M, et al. Control of tunnel resistance of nanogaps by field-emission-induced electromigration. Jap J Appl Phys, 2007, 46: L907–909
Bernard Y, Gonon P, Jousseaume V. Resistance switching of Cu/SiO2 memory cells studied under voltage and currentdriven modes. Appl Phys Lett, 2010, 96: 193502
Kim K M, Choi B J, Hwang C S. Localized switching mechanism in resistive switching of atomic-layer-deposited TiO2 thin films. Appl Phys Lett, 2007, 90: 242906
Xu N, Gao B, Liu L F, et al. A unified physical model of switching behavior in oxide-based RRAM. In: 2008 Symposium on VLSI Technology, 2008. 100–101
Sim H, Seong D J, Chang M, et al. Excellent resistance switching characteristics of Pt/single-crystal Nb-doped SrTiO3 Schottky junction. In: Non-Volatile Semiconductor Memory Workshop, 2006. 88–89
Sharia O, Tse K, Robertson J, et al. Extended Frenkel pairs and band alignment at metal-oxide interfaces. Phys Rev B, 2009, 79: 125305
Liang C, Terabe K, Hasegawa T, et al. Resistance switching in anodic oxidized amorphous TiO2 films. Appl Phys Exp, 2008, 1: 064002
Hass G, Bradford A P. Optical properties and oxidation of evaporated titanium films. J Opt Soc Am A, 1957, 47: 125–129
Ferrari S, Scarel G. Oxygen diffusion in atomic layer deposited ZrO2 and HfO2 thin films on Si (100). J Appl Phys, 2004, 96: 144–149
Busch B W, Schulte W H, Garfunkel E, et al. Oxygen exchange and transport in thin zirconia films on Si (100). Phys Rev B, 2000, 62: 290–293
Kim I, Ahn S D, Cho B W, et al. Microstructure and electrical properties of tantalum oxide thin film prepared by electron-cyclotron resonance plasma-enhanced chemical vapor deposition. Jap J Appl Phys, 1994, 33: 6691–6698
Gulino D A. Oxygen barrier coatings for enhanced stability of polyimide composites at elevated temperatures. In: NASA 1994, 1994
Wei Z, Kanzawa Y, Arita K, et al. Highly reliable TaOx ReRAM and direct evidence of redox reaction mechanism. In: IEDM 2008. 2008. 293–296
Chen Y S, Lee H Y, Chen P S, et al. Highly scalable hafnium oxide memory with improvements of resistive distribution and read disturb immunity. In: IEDM 2009. 2009. 105–108
Kim H D, An H M, Kim K C. Large resistive-switching phenomena observed in Ag/Si3N4/Al memory cells. Semicon Sci Tech, 2010, 25: 065002
Pandian R, Kooi B J, Palasantzas G, et al. Polarity-dependent reversible resistance switching in Ge-Sb-Te phase-change thin films. Appl Phys Lett, 2007, 91: 152103
Cheung K P. A physics-based, unified gate-oxide breakdown model. In: IEDM 1999. 1999. 719–722
Chang S H, Chae S C, Lee S B, et al. Effects of heat dissipation on unipolar resistance switching in Pt/NiO/Pt capacitors. Appl Phys Lett, 2008, 92: 183507
Black J R. Electromigration—a brief survey and some recent results. In: Proc. IEEE Intl. Reliability Phys. Symposium, 1968. 338–347
Lee H Y, Chen Y S, Chen P S, et al. Comprehensive study of read disturb immunity and optimal read scheme for high speed HfOx-based RRAM with Ti layer. In: VLSI TSA 2010. 2010. 132–133
Meyer R, Schloss L, Brewer J, et al. Oxide dual-layer memory element for scalable non-volatile cross-point memory technology. In: NVMTS 2008
Tseng Y H, Huang C E, Kuo C H, et al. High density and ultra small cell size of contact ReRAM (CR-RAM) in 90 nm CMOS logic technology and circuits. In: IEDM 2009. 2009. 109–112
Tsunoda K, Kinoshita K, Noshiro H, et al. Low power and high speed switching of Ti-doped NiO ReRAM under the unipolar voltage source of less than 3 V. In: IEDM 2007. 2007. 767–770
Sheu S S, Chiang P C, Lin W P, et al. A 5 ns fast write multi-level non-volatile 1 K bits RRAM memory with advance write Scheme. In: 2009 Symposium on VLSI Circuits. 2009. 82–83
Kim M G, Kim S M, Choi E J. Study of transport and dielectric of resistive memory states in NiO thin film. Jpn J Appl Phys, 2005, 44: L1301–L1303
McWhan D B, Menth A, Remeika J P. Metal insulator transitions in transition metal oxides. J Phys Colloq, 1971, 32: C1-1079–C1-1085
Wang C H, Tsai Y H, Lin K C, et al. 3-Dimensional 4F2 ReRAM cell with CMOS compatible logic process. In: IEDM 2010, in press
Servalli G. A 45 nm generation phase change memory technology. In: IEDM 2009. 2009. 113–116
Taur Y, Ning T H. Fundamentals of Modern VLSI Devices. Cambridge: Cambridge University Press, 2009. 64–70
Singh R, Richmond J. SiC power Schottky diodes in power factor correction circuits. In: Cree Application Note, 2002
Krzysztof S, Speier W, Bihlmayer G, et al. Switching the electrical resistance of individual dislocations in singlecrystalline SrTiO3. Nat Mater, 2006, 5: 312–320
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, F.T., Lee, H., Chen, Y. et al. Resistance switching for RRAM applications. Sci. China Inf. Sci. 54, 1073–1086 (2011). https://doi.org/10.1007/s11432-011-4217-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11432-011-4217-8