Abstract
Supernumerary robotic limbs(SRLs) are new type of wearable robots. In order to achieve safe and stable operations for the SRLs, a tendon-driven passive variable stiffness joint(pVSJ) integrated into the shoulder joint of the SRLs is presented, which can output different stiffness and improve the safety of human-robot interaction. The stiffness change of the pVSJ is achieved by winding a tendon around pulleys to drive the flexible element to stretch. In the non-operating state, the stiffness characteristics of the pVSJ can be changed by adjusting the pre-tension of the flexible element, the winding method of the tendon, and replacing the flexible element. A mathematical model is established for the tendon-driven pVSJ to reveal its stiffness characteristics. The model is verified through quasi-static experiments. The experimental results show that there is an obvious hysteresis phenomenon during low torque loading. The hysteresis range is 20.8%-32.5%. The angular range of the loading hysteresis of the pVSJ is negatively related to the spring preload, spring stiffness, the number of working branches, and it is positively related to the rope diameter. The unloading process basically conformed to the theoretical model, with a maximum relative error of 3.4%. Therefore, the exact stiffness output can be achieved by first increasing and then decreasing the joint torque to reach the target torque.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Tong, Y., Liu, J.: Review of research and development of supernumerary robotic limbs. IEEE/CAA J. Autom. Sinica 8, 929–952 (2021)
Yang, B., et al.: Supernumerary robotic limbs: a review and future outlook. IEEE Trans. Med. Robot. Bionics 3, 623–639 (2021)
Dominijanni, G., et al.: The neural resource allocation problem when enhancing human bodies with extra robotic limbs. Nat. Mach. Intell. 3, 850–860 (2021)
Tsagarakis, N.G., et al.: A compact soft actuator unit for small scale human friendly robots. In: 2009 IEEE International Conference on Robotics and Automation(Kobe), pp. 4356–4362 (2009)
Vanderborght, B., et al.: Variable impedance actuators: a review. Robot. Auton. Syst. 61, 1601–1614 (2013)
Hasanen, B.B., et al.: Novel supernumerary robotic limb based on variable stiffness actuators for hemiplegic patients assistance. In: Proceedings of the 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (2022)
Awad, M.I., et al.: Passive discrete variable stiffness joint (pDVSJ-II): modeling, design, characterization, and testing toward passive haptic interface. J. Mech. Robot. 11, 011005 (2019)
Wolf, S., et al.: Variable stiffness actuators: review on design and components. IEEE/ASME Trans. Mechatron. 21, 2418–2430 (2016)
Petit, F., Dietrich, A., Albu-Schaffer, A.: Generalizing torque control concepts: using well-established torque control methods on variable stiffness robots. IEEE Robot. Automat. Mag. 22, 37–51 (2015)
Qian, Y., et al.: Design, modelling, and control of a reconfigurable rotary series elastic actuator with nonlinear stiffness for assistive robots. Mechatronics 86, 102872 (2022)
Park, J.-J., Song J.B.: Safe joint mechanism using inclined link with springs for collision safety and positioning accuracy of a robot arm. In: 2010 IEEE International Conference on Robotics and Automation(Anchorage), pp. 813–818 (2010)
Van Ham, R., et al.: MACCEPA, the mechanically adjustable compliance and controllable equilibrium position actuator: design and implementation in a biped robot. Robot. Auton. Syst. 55, 761–768 (2007)
Chen, T., Casas, R., Lum, P.S.: An elbow exoskeleton for upper limb rehabilitation with series elastic actuator and cable-driven differential. IEEE Trans. Robot. 35, 1464–1474 (2019)
Balser, F., et al.: A novel passive shoulder exoskeleton designed with variable stiffness mechanism. IEEE Robot. Autom. Lett. 7, 2748–2754 (2022)
Liu, Y., et al.: A low-cost single-motor-driven climbing robot based on overrunning spring clutch mechanisms. Int. J. Adv. Robot. Syst. 19 (2022)
Zhou, T., et al.: Reducing the metabolic energy of walking and running using an unpowered hip exoskeleton. J. NeuroEng. Rehabil. 18, 95 (2021)
Park, J.-J., et al.: Safe link mechanism based on nonlinear stiffness for collision safety. Mech. Mach. Theory 43, 1332–1348 (2008)
Liao, Z., et al.: A human augmentation device design review: supernumerary robotic limbs. IR 50, 256–274 (2023)
Li, Z., Chen, W., Bai, S.: A novel reconfigurable revolute joint with adjustable stiffness. In: 2019 International Conference on Robotics and Automation (ICRA), pp. 8388–8393 (2019)
Acknowledgement
This work was supported by the National Natural Science Foundation of China (U22A20204 and 52205018), the Fundamental Research Funds for the Central Universities, China (NP2022304).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Liu, K., Chen, B., Liao, Z., Chang, T., Xu, J., Tu, Z. (2023). Structural Design and Stiffness Characteristics of a Passive Variable Stiffness Joint. In: Yang, H., et al. Intelligent Robotics and Applications. ICIRA 2023. Lecture Notes in Computer Science(), vol 14268. Springer, Singapore. https://doi.org/10.1007/978-981-99-6486-4_35
Download citation
DOI: https://doi.org/10.1007/978-981-99-6486-4_35
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-6485-7
Online ISBN: 978-981-99-6486-4
eBook Packages: Computer ScienceComputer Science (R0)