Abstract
The complexity of a mechatronic Product-Service-System (PSS), as a combination of products, IT-components and services, requires a profound system’s understanding already in the early phase of the planning process. For a lifecycle oriented planning the different lifecycles of the subsytems and their interrelations with regard to context and time, as well as overlaps through the introduction of a new generation or a facelifted version have to be considered and predetermined. In this paper a framework, based on various existing lifecycle models, is presented to analyze and to deal with these different lifecycle constellations. The framework addresses both the description and temporal representation of singular lifecycle phases in the context of the overall PSS-lifecycle as well as lifecycle constellations of subsequently following PSS- versions.
Chapter PDF
Similar content being viewed by others
Keywords
References
Neely, A.: The servitization of manufacturing: An analysis of global trends. In: 14th European Operations Management Association Conference, Ankara (2007)
Aurich, J.C., Fuchs, C., DeVries, M.: An Approach to Lifecycle Oriented Technical Service Design. CIRP Annals - Manufacturing Technology 53(1), 151–154 (2004)
Hepperle, C., Orawski, R., Langer, S., Mörtl, M., Lindemann, U.: Temporal aspects in lifecycle oriented planning of product-service-systems. In: International Conference on Research into Design: ICoRD 2011, Bangalore (2011)
Ulrich, K.T., Eppinger, S.D.: Product design and development, 3rd edn. McGraw-Hill/Irwin, Boston (2004)
Scheuing, E.E.: The product lifecycle as an aid in strategy decisions. Management International Review 9(4/5), 111–130 (1969)
Ostertag, R.: Supply-Chain-Koordination im Auslauf in der Automobilindustrie: Koordinationsmodell auf Basis von Fortschrittszahlen zur dezentralen Planung bei zentraler Informationsbereitstellung. Gabler, Wiesbaden (2008)
Ehrlenspiel, K., Kiewert, A., Lindemann, U., Hundal, M.S.: Cost-efficient design. Springer, Berlin (2007)
Meerkamm, H.: Design for X - A Core Area of Design Methodology. Journal of Engineering Design 5(2), 165–181 (1994)
VDI-Richtlinie 2243: Recycling-oriented product development. VDI-Verlag, Düsseldorf (2002)
Hepperle, C., Thanner, S., Mörtl, M., Lindemann, U.: An integrated product lifecycle model and interrelations in-between the lifecycle phases. In: 6th International Conference on Product Lifecycle Management, Bath (2009)
Leffingwell, D., Widrig, D.: Managing software requirements: A use case approach, 2nd edn. Addison-Wesley, Boston (2003)
Zarnekow, R., Scheeg, J., Brenner, W.: Untersuchung der Lebenszykluskosten von IT-Anwendungen. Wirtschaftsinformatik 46(3), 181–187 (2004)
Ramaswamy, R.: Design andmanagementofserviceprocesses. Addison-Wesley, Reading (1996)
Meiren, T., Barth, T.: Service Engineering in Unternehmen umsetzen: Leitfaden für die Entwicklung von Dienstleistungen. Fraunhofer-IRB-Verlag, Stuttgart (2002)
Bullinger, H., Fähnrich, K.-P., Meiren, T.: Service engineering-methodical development of new service products. International Journal of Production Economics 85(3), 275–287 (2003)
Schneider, K., Scheer, A.-W.: Konzept zur systematischen und kundenorientierten Entwicklung von Dienstleistungen. InstitutfürWirtschaftsinformatik (IWi), Heft 175 (2003)
Potts, G.W.: Exploit Your Product’s Service Lifecycle. Harvard Business Review 66(5), 32–36 (1988)
Blinn, N., Nüttgens, M., Schlicker, M., Thomas, O., Walter, P.: Lebenszyklusmodelle hybrider Wertschöpfung: Modellimplikationen und Fallstudie. In: Thomas, O., Loos, P., Nüttgens, M. (eds.) Hybride Wertschöpfung, pp. 130–143. Springer, Berlin (2010)
Hepperle, C., Orawski, R., Nolte, B.D., Mörtl, M., Lindemann, U.: An integrated lifecycle model of product-service-systems. In: 2nd CIRP Industrial Product-Service Systems Conference, Linköping (2010)
VDI-Richtlinie 2422: Systematical development of devices controlled by microelectronics. VDI-Verlag, Düsseldorf (1994)
Pahl, G., Beitz, W., Feldhusen, J., Grote, K.-H.: Engineering Design: A Systematic Approach. 3rd English edition. Springer, London (2007)
Zaggl, R.: Product Lifecycle Management - Practical Application in the Drilling and Demolition Business at Hilti. Thexis 17(2), 39–42 (2000)
Hepperle, C., Langer, S., Scherer, A., Schwetz, P., Lindemann, U.: Consideration of factors influencing the time of launching new products. In: Proceedings of the 11th International Design Conference, DESIGN 2010, pp. 1099–1108 (2010)
Saunders, J., Jobber, D.: Product replacement: Strategies for simultaneous product deletion and launch. Journal of Product Innovation Management 11(5), 433–450 (1994)
Ryan, C., Riggs, W.E.: Redefining the product lifecycle: The five-element product wave. Business Horizons 39(5), 33–40 (1996)
Phaal, R., Farrukh, C.J., Probert, D.R.: Technology road mapping—A planning framework for evolution and revolution. Technological Forecasting and Social Change 7(1-2), 5–26 (2004)
Lindemann, U.: Methodische Entwicklung technischer Produkte: Methoden flexibel und situationsgerecht anwenden, 3rd edn. Springer, Berlin (2009)
Griffin, A.: Metrics for measuring product development cycle time. Journal of Product Innovation Management 10(2), 112–125 (1993)
Joglekar, N.R., Rosenthal, S.R.: Coordination of Design Supply Chains for Bundling Physical and Software Products. Journal of Product Innovation Management 20(5), 374–390 (2003)
Baumgarten, H., Risse, J.: Logistikbasiertes Management des Produktentstehungsprozesses. In: Hossner, R. (ed.) Jahrbuch der Logistik 2001, pp. 150–156. Verlagsgruppe Handelsblatt, Düsseldorf (2001)
Druehl, C., Schmidt, G., Souza, G.: The optimal pace of product updates. European Journal of Operational Research 192(2), 621–633 (2009)
Graf, R.: Erweitertes Supply-chain-Management zur Ersatzteilversorgung. Vulkan-Verlag, Essen (2005)
Schmidt, T., Laucht, O., Bauer, A.: Mehrwert schaffen durch Fokussierung auf das Servicegeschäft. In: Barkawi, K., Baader, A., Montanus, S (Hrsg.) Erfolgreich mit After Sales Service, pp. 95–111. Springer, Berlin (2006)
Jovane, F., Alting, L., Armillotta, A., Eversheim, W., Feldmann, K., Seliger, G., Roth, N.: A Key Issue in Product Lifecycle: Disassembly. CIRP Annals - Manufacturing Technology 42(2), 651–658 (1993)
Düssel, M.: Handbuch Marketingpraxis: Von der Analyse zur Strategie: Ausarbeitung der Taktik, Steuerung und Umsetzung in der Praxis. Cornelsen, Berlin (2006)
Azarenko, A., Roy, R., Shehab, E., Tiwari, A.: Technical product-service systems: some implications for the machine tool industry. Journal of Manufacturing Technology Management 20(5), 700–722 (2009)
Langer, S.F., Lindemann, U.: Managing Cycles in Development Processes - Analysis and Classification of External Context Factors. In: Proceedings of the 17th International Conference on Engineering Design (ICED 2009), Stanford, vol. 1, pp. 539–550 (2009)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 International Federation for Information Processing
About this paper
Cite this paper
Kernschmidt, K., Hepperle, C., Mörtl, M., Vogel-Heuser, B. (2012). Lifecycle Oriented Planning of Mechatronic Products and Corresponding Services. In: Rivest, L., Bouras, A., Louhichi, B. (eds) Product Lifecycle Management. Towards Knowledge-Rich Enterprises. PLM 2012. IFIP Advances in Information and Communication Technology, vol 388. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-35758-9_31
Download citation
DOI: https://doi.org/10.1007/978-3-642-35758-9_31
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-35757-2
Online ISBN: 978-3-642-35758-9
eBook Packages: Computer ScienceComputer Science (R0)