Conceptual Design Methodology for Knitted Fabrics | SpringerLink
Skip to main content
Springer Nature Link
Log in

Conceptual Design Methodology for Knitted Fabrics

  • Conference paper
  • First Online:
Product Lifecycle Management. Green and Blue Technologies to Support Smart and Sustainable Organizations (PLM 2021)

Part of the book series: IFIP Advances in Information and Communication Technology ((IFIPAICT,volume 639))

Included in the following conference series:

  • 1547 Accesses

Abstract

This paper proposes operational systematics for the design phase, specifically the conceptual design, considering integration with manufacturing variables, promoting the concurrent engineering in the knitted industry. The bibliographic references are analyzed to compose a theoretical framework about models for the product development process (PDP). In order to understand the PDP practiced in the knitting industries, field research was conducted in four large companies located in Brazil. The PDP models identified were compared with the theoretical frameworks for generic products. Based on this analysis and the contribution of three specialists in knitting development, a methodology is proposed to support the conceptual knitting design, considering manufacturing aspects and including some tools. This methodology is evaluated through a simulation, where two groups use the proposed methodology, and the indicators are compared with the third group with a high experience that does not use it to develop a conceptual knitting project. Among the results, the article proposes and evaluates a systematization, adapted to the Brazilian local reality and needs, considering the integration between product design and manufacturing phases.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
¥17,985 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
JPY 3498
Price includes VAT (Japan)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
JPY 19447
Price includes VAT (Japan)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
JPY 24309
Price includes VAT (Japan)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
JPY 24309
Price includes VAT (Japan)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. ABIT - Perfil geral do setor têxtil 2017. https://www.abit.org.br. Accessed 10 Apr 2017

  2. Rodrigues, R.: Proposed systematization of the conceptual phase in the process of product development in the textile industry.MSc degree thesis, Universidade Tecnológica Federal do Paraná, Curitiba, Brazil (2012)

    Google Scholar 

  3. Rodrigues, R.: Conceptual model for the textile product development process. Ph.D. degree thesis, Universidade Tecnológica Federal do Paraná, Curitiba, Brazil (2016)

    Google Scholar 

  4. Brillowski, F., Dammers, H., Koch, H., Müller, K., Reinsch, L., Greb, C.: Know-how transfer and production support systems to cultivate the internet of production within the textile industry. In: Russo, D., Ahram, T., Karwowski, W., Di Bucchianico, G., Taiar, R. (eds.) IHSI 2021. AISC, vol. 1322, pp. 309–315. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-68017-6_46

    Chapter  Google Scholar 

  5. Back, N., Ogliari, A., Dias, A., Silva, J.C.: Projeto Integrado de Produtos: Planejamento, Concepção e Modelagem. Editora Manole, Barueri, Brazil (2008)

    Google Scholar 

  6. Ma, Y.: An integrated model for shaped knit garment design and development. Ph.D. degree thesis, North Carolina State University, North Carolina, EUA (2013)

    Google Scholar 

  7. May-Plumlee, T., Little, T.J.: No-interval coherently phased product development model for apparel. Int. J. Cloth. Sci. Technol. 10, 342–364 (1998). https://doi.org/10.1108/09556229810239333

    Article  Google Scholar 

  8. Chen, J.H.C.: Integration of textile and fashion design with overstitching. Res. J. Text. Appar. 15, 33–43 (2011). https://doi.org/10.1108/RJTA-15-01-2011-B004

    Article  Google Scholar 

  9. Santiago-Santiago, K., Laureano-Cruces, A.L., Antuñano-Barranco, J.M.A., Domínguez-Pérez, O., Sarmiento-Bustos, E.: An expert system to improve the functioning of the clothing industry: a development methodology. Int. J. Cloth. Sci. Technol. 27, 99–128 (2015). https://doi.org/10.1108/IJCST-08-2013-0084

    Article  Google Scholar 

  10. LaBat, K.L., Sokolowski, S.L.: A three-stage design process applied to an industry-university textile product design project. Cloth. Text. Res. J. 17, 11–20 (1999). https://doi.org/10.1177/0887302X9901700102

    Article  Google Scholar 

  11. Chapman, L.P., Little, T.: Textile design engineering within the product shape. J. Text. Inst. 103, 866–874 (2012). https://doi.org/10.1080/00405000.2011.615491

    Article  Google Scholar 

  12. El-Hady, R.A.M.A.: The effect of aesthetic beauty design on the performance properties of jacquard weft knitted fabrics. Asian J. Text. 1, 74–86 (2011). https://doi.org/10.3923/ajt.2011.74.86

    Article  Google Scholar 

  13. Jiao, R., et al.: Design engineering in the age of industry 4.0. ASME. J. Mech. 143(7) (2021)

    Google Scholar 

  14. Rahman, M.: Applications of the digital technologies in textile and fashion manufacturing industry. Technium. 3(1), 1–14 (2021)

    Google Scholar 

  15. Rozenfeld, H.: Gestão de desenvolvimento de produtos: uma referência para a melhoria do processo. Saraiva, São Paulo, Brazil (2006)

    Google Scholar 

  16. Pahl, G., Beitz, W., Feldhusen, J., Grote, K.: Projeto na engenharia: fundamentos do desenvolvimento eficaz de produtos, métodos e aplicações. Edgard Blucher, São Paulo (2007)

    Google Scholar 

  17. Mattioda, R.A., Mazzi, A., Canciglieri, O., Scipioni, A.: Determining the principal references of the social life cycle assessment of products. Int. J. Life Cycle Assess. 20(8), 1155–1165 (2015). https://doi.org/10.1007/s11367-015-0873-z

    Article  Google Scholar 

  18. Fernandes, P.T., Canciglieri, J.O.: Desenvolvimento integrado do produto e as inter-relações com o ciclo de vida. Revista Sodebras 8(88) (2013)

    Google Scholar 

  19. Amitrano, F.G., Estorilio, C.C.A., De Oliveira Franzosi Bessa, L., Hatakeyama, K.: Six Sigma application in small enterprise. Concurr. Eng. Res. Appl. 24, 69–82 (2016). https://doi.org/10.1177/1063293X15594212

  20. Estorilio, C., Moraes Vaz, G.R., De Lisboa, F.C., De Oliveira Franzosi Bessa, L.: The relationship between industrial process maturity and quality certification (2015). https://doi.org/10.1016/j.csi.2014.11.002

  21. Rauniar, R., Rawski, G.: Organizational structuring and project team structuring in integrated product development project. Int. J. Prod. Econ. 135, 939–952 (2012). https://doi.org/10.1016/j.ijpe.2011.11.009

    Article  Google Scholar 

  22. Rauniar, R., Doll, W., Rawski, G., Hong, P.: Shared knowledge and product design glitches in integrated product development. Int. J. Prod. Econ. 114, 723–736 (2008). https://doi.org/10.1016/j.ijpe.2008.03.005

    Article  Google Scholar 

  23. Ahmad, S., Mallick, D.N., Schroeder, R.G.: New product development: impact of project characteristics and development practices on performance. J. Prod. Innov. Manag. 30, 331–348 (2013). https://doi.org/10.1111/j.1540-5885.2012.01002.x

    Article  Google Scholar 

  24. Salgado, E.G., Salomon, V.A.P., Mello, C.H.P., Silva, C.E.S.D.: A reference model for the new product development in medium-sized technology-based electronics enterprises. IEEE Lat. Am. Trans. 12, 1341–1348 (2014). https://doi.org/10.1109/TLA.2014.7014499

    Article  Google Scholar 

  25. Fernandes, P.T.: Método de desenvolvimento integrado de produto orientado para a sustentabilidade. MSc degree thesis, Pontifícia Universidade Católica do Paraná, Curitiba, Brazil (2013)

    Google Scholar 

  26. Fernandes, P.T.: Modelo de Referência para Processo de Design Orientado à Sustentabilidade. PhD degree thesis, Pontifícia Universidade Católica do Paraná, Curitiba, Brazil (2017)

    Google Scholar 

  27. Albiñana, J.C., Vila, C.: A framework for concurrent material and process selection during conceptual product design stages. Mater. Des. 41, 433–446 (2012). https://doi.org/10.1016/j.matdes.2012.05.016

    Article  Google Scholar 

  28. Groche, P., Schmitt, W., Bohn, A., Gramlich, S., Ulbrich, S., Günther, U.: Integration of manufacturing-induced properties in product design. CIRP Ann. - Manuf. Technol. 61, 163–166 (2012). https://doi.org/10.1016/j.cirp.2012.03.041

    Article  Google Scholar 

  29. Doll, W.J., Hong, P., Nahm, A.: Antecedents and outcomes of manufacturability in integrated product development. Int. J. Oper. Prod. Manag. 30, 821–852 (2010). https://doi.org/10.1108/01443571011068180

    Article  Google Scholar 

  30. Gedell, S., Michaelis, M.T., Johannesson, H.: Integrated model for co-development of products and production systems - a systems theory approach. Concurr. Eng. Res. Appl. 19, 139–156 (2011). https://doi.org/10.1177/1063293X11406751

    Article  Google Scholar 

  31. Pernstal, J., Magazinius, A., Gorschek, T.: A study investigating challenges in the interface between product development and manufacturing in the development of software-intensive automotive systems. Int. J. Softw. Eng. Knowl. Eng. 22, 965–1004 (2012). https://doi.org/10.1142/S0218194012500271

    Article  Google Scholar 

  32. Pereira, J.A.: Modelo de desenvolvimento integrado de produto orientado para projetos P&D do setor elétrico brasileiro. PhD degree thesis, Pontifícia Universidade Católica do Paraná, Curitiba, Brazil (2014)

    Google Scholar 

  33. Demoly, F., Yan, X.T., Eynard, B., Rivest, L., Gomes, S.: An assembly-oriented design framework for product structure engineering and assembly sequence planning. Robot. Comput. Integr. Manuf. 27, 33–46 (2011). https://doi.org/10.1016/j.rcim.2010.05.010

    Article  Google Scholar 

  34. Kaminski, P.C.: Desenvolvendo produtos com planejamento, criatividade e qualidade. Editora LTC, Rio de Janeiro, Brazil (2000)

    Google Scholar 

  35. Baxter, M.: Projeto de produto: guia prático para o design de novos produtos. 3rd edn. Blucher, São Paulo (2011)

    Google Scholar 

  36. Cooper, R.G.: Winning at New Products: Accelerating the Process from Idea to Launch, 3rd edn. Basic Books, New York (2001)

    Google Scholar 

  37. Krishnan, V., Ulrich, K.T.: Product development decisions: a review of the literature. Manag. Sci. 47(1), 1–21 (2001)

    Google Scholar 

  38. Romano, L.N.: Modelo de referência para o processo de desenvolvimento de máquinas agrícolas. PhD degree thesis, Universidade Federal de Santa Catarina - UFSC, Florianópolis, Brazil (2003)

    Google Scholar 

  39. Waage, S.A.: Re-considering product design: a practical “road-map” for integration of sustainability issues. J. Clean. Prod. 15, 638–649 (2007). https://doi.org/10.1016/j.jclepro.2005.11.026

    Article  Google Scholar 

  40. Okumura, M.L.M.: A engenharia simultânea aplicada ao projeto de desenvolvimento integrado de produtos inclusivos: uma proposta de framework conceitual. MSc degree tesis, Pontifícia Universidade Católica do Paraná, Curitiba, Brazil (2012)

    Google Scholar 

  41. Sales, O.P.: Método híbrido de desenvolvimento de produto: um estudo de caso baseado nos modelos funil e stage gate. MSc degree thesis, Pontifícia Universidade Católica do Paraná, Curitiba, Brazil (2013)

    Google Scholar 

  42. Velden, N.M.V.D., Kuusk, K., Köhler, A.R.: Life cycle assessment and eco-design of smart textiles: the importance of material selection demonstrated through e-textile product redesign. Mater. Des. 84, 313–324 (2015)

    Article  Google Scholar 

  43. Vezzetti, E., Alemanni, M., Macheda, J.: Supporting product development in the textile industry through the use of a product lifecycle management approach: a preliminary set of guidelines. Int. J. Adv. Manuf. Technol. 79(9–12), 1493–1504 (2015). https://doi.org/10.1007/s00170-015-6926-4

    Article  Google Scholar 

  44. Pugh, S.: Total Design: Integrated Methods for Successful Product Engineering. Addison Wesley, Wokingham (1991)

    Google Scholar 

  45. Setti, P.H.P., Canciglieri Junior, O., Estorilio, C.C.A.: DFA concepts in a concurrent engineering environment: a white goods case. Concurrent Eng. 29, 169–182 (2021). https://doi.org/10.1177/1063293X20985531

  46. Setti, P.H.P., Canciglieri Junior, O., Estorilio, C.C.A.: Integrated product development method based on Value Engineering and design for assembly concepts. J. Ind. Inf. Integr. 21, 100199 (2021). https://doi.org/10.1016/j.jii.2020.100199

  47. Rodrigues, R. dos S., Cziulik, C., Estorilio, C.C.A., Hatakeyama, K.: Projeto conceitual para a indústria têxtil. Espacios 37, 14–27 (2016)

    Google Scholar 

  48. Borsato, M., Estorilio, C.C.A., Cziulik, C., Ugaya, C.M.L., Rozenfeld, H.: An ontology building approach for knowledge sharing in product lifecycle management. Int. J. Bus. Syst. Res. 4 (2010). https://doi.org/10.1504/IJBSR.2010.032951

  49. Franzosi, L.D.O., Estorilio, C.C.A.: Relationship between PDP maturity and ISO certification in the food industry. Gest. e Prod. 26 (2019). https://doi.org/10.1590/0104-530X3929-19

  50. Estorilio, C.C.A., Rodrigues, F.R.M., Canciglieri, O., Hatakeyama, K.: Preventing problems in technology transfer: a case study. J. Ind. Integr. Manag. 02, 1750006 (2017). https://doi.org/10.1142/S2424862217500063

    Article  Google Scholar 

  51. Mattioda, R.A., Fernandes, P.T., Detro, S.P., Casela, J.L., Junior, O.C.: Principle of triple bottom line in the integrated development of sustainable products. Chem. Eng. Trans. 35, 199–204 (2013). https://doi.org/10.3303/CET1335033

    Article  Google Scholar 

  52. Fernandes, P.T., Canciglieri Júnior, O., Sant’Anna, Â.M.O.: Method for integrated product development oriented to sustainability. Clean Technol. Environ. Policy (Print) 18, 1265–1284 (2016)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Federal Technological University of Paraná, UTFPR/DAMEC, Curitiba, PR, 81280-340, Brasil

    Carla Estorilio, Ronaldo Rodrigues & Carlos Cziulik

  2. Federal Technological University of Paraná, UTFPR/COENT, Apucarana, PR, 86812-460, Brasil

    Ariana Fagan

Authors
  1. Carla Estorilio
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ronaldo Rodrigues
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ariana Fagan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Carlos Cziulik
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Carla Estorilio .

Editor information

Editors and Affiliations

  1. Pontifícia Universidade Católica do Paraná, Curitiba, Brazil

    Osiris Canciglieri Junior

  2. University Grenoble Alpes, Grenoble, France

    Frédéric Noël

  3. École de Technologie Supérieure, Montreal, QC, Canada

    Louis Rivest

  4. Qatar University, Doha, Qatar

    Abdelaziz Bouras

Rights and permissions

Reprints and permissions

Copyright information

© 2022 IFIP International Federation for Information Processing

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Estorilio, C., Rodrigues, R., Fagan, A., Cziulik, C. (2022). Conceptual Design Methodology for Knitted Fabrics. In: Canciglieri Junior, O., Noël, F., Rivest, L., Bouras, A. (eds) Product Lifecycle Management. Green and Blue Technologies to Support Smart and Sustainable Organizations. PLM 2021. IFIP Advances in Information and Communication Technology, vol 639. Springer, Cham. https://doi.org/10.1007/978-3-030-94335-6_4

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-94335-6_4

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-94334-9

  • Online ISBN: 978-3-030-94335-6

  • eBook Packages: Computer ScienceComputer Science (R0)

Publish with us

Policies and ethics

Societies and partnerships

Search

Navigation