Abstract
In order to improve the posture adjustment ability of the minimally invasive surgical instrument joints, to better adapt to the needs of the surgical environment, the variable stiffness is achieved by changing the transmission efficiency, and the work of the actuated joint in each limb of the parallel mechanism is analyzed, Analysis of work done by main power to each motion pair in parallel Mechanism. Based on the solution of the matrix, the influence of the transmission efficiency on the Jacobian matrix is investigated, and the stiffness matrix of the Jacobian matrix-based mechanism is established. The research results shows that the stiffness can be adjusted by changing the transmission efficiency. Stiffness model analysis of the designed minimally invasive instrument joints was carried out. Through the stiffness calculation of the model, ANSYS static stiffness analysis and model experiment verification, it was finally proved that the variable stiffness based on transmission efficiency is highly practicable.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Li, X: Research and optimal design of the variable stiffness manipulator in single-port surgical instrument. Tianjin University (2017)
Bai, Z., Chen, W.: Calculation model of ball joint stiffness and improvement of stiffness of parallel machine tools by redundant branches. Int. J. Mech. Eng. Educ. 42(10), 142–145 (2006)
Qu, H., Liang, Y., Fang, Y., Zhou, Y.: Statics and stiffness analysis of 4-RRS redundant spherical parallel mechanism. J. Mech. Eng. 51(11), 8–15 (2015)
Gosselin, C.: Stiffness mapping for parallel manipulators. IEEE Trans. Robot. Autom. 6(3), 377–382 (1990)
Tsai, M.J., Lee, H.W.: Generalized evaluation for the transmission performance of mechanisms. Mech. Mach. Theory 29(4), 607–618 (1994)
Tsai, L.W., Joshi, S.: Jacobian analysis of limited-DOF parallel manipulators. Trans. ASME J. Mech. Des. 124(2), 254–258 (2002)
Yu, J., Liu, X., Ding, X.: Foundation of Mathematics of Robot Mechanism, 2nd edn. China Machine Press, Beijing (2008)
Liu, X., Xie, F., Wang, J.: The Basis of Mechanism of Parallel Robots. Higher Education Press, Beijing (2016)
Marquet, F., Krut, S., Company, O., Pierrot, F.: A new redundant parallel mechanism-modeling, control and first results. In: IEEE/RSJ International Conference on Intelligent Robots & Systems. IEEE (2001)
Tsai, L., Joshi, S.: Comparison study of architectures of four 3 degree-of-freedom translational parallel manipulators. In: IEEE International Conference on Robotics & Automation. IEEE (2001)
Cao, W., Yang, D., Ding, H.: A method for stiffness analysis of over constrained parallel robotic mechanisms with Scara motion. Robot. Comput. Integr. Manuf. 49, 426–435 (2018)
Jun, Z., Yanqin, Z., Jiansheng, D.: Compliance modeling and analysis of a 3-RPS parallel kinematic machine module. Chin. J. Mech. Eng. 27(4), 703–713 (2014)
Xu, Y., Liu, W., Yao, J., Zhao, Y.: A method for force analysis of the over constrained lower mobility parallel mechanism. Mech. Mach. Theory 88, 31–48 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Chen, L., Zhang, F., Cui, G., Sun, J., Zheng, M., Pan, R. (2019). Minimally Invasive Instrument Joint Design Based on Variable Stiffness of Transmission Efficiency. In: Yu, H., Liu, J., Liu, L., Ju, Z., Liu, Y., Zhou, D. (eds) Intelligent Robotics and Applications. ICIRA 2019. Lecture Notes in Computer Science(), vol 11745. Springer, Cham. https://doi.org/10.1007/978-3-030-27529-7_27
Download citation
DOI: https://doi.org/10.1007/978-3-030-27529-7_27
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27528-0
Online ISBN: 978-3-030-27529-7
eBook Packages: Computer ScienceComputer Science (R0)