default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCID10th ETFA 2005: Catania, Italy
- Proceedings of 10th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2005, September 19-22, 2005, Catania, Italy. IEEE 2005, ISBN 0-7803-9401-1
- Fumio Harashima:
Human Adaptive Mechatronics - Interaction and Intelligence. - Cássia Yuri Tatibana, Rômulo Silva de Oliveira, Carlos Montez
:
Dynamic guarantee in component-based distributed real-time systems. - Sandro Santos Andrade, Raimundo José de Araújo Macêdo:
A component-based real-time architecture for distributed supervision and control applications. - Patricia Della Méa Plentz, Rômulo Silva de Oliveira, Carlos Montez:
Scheduling of the distributed thread abstraction with timing constraints using RTSJ. - Mohamed Khalgui, Xavier Rebeuf, Francesco Zampognaro:
Adaptable OPC-XML contracts taking into account network traffic. - Kleanthis Thramboulidis, A. Zoupas:
Real-time Java in control and automation: a model driven development approach. - Y. Veryha:
Going beyond performance limitations of OPC DA implementation. - Lucia Lo Bello, Orazio Mirabella:
Communication techniques and architectures for Bluetooth networks in industrial scenarios. - R. Brito, Yeqiong Song:
A dispatching mechanism providing REMPLI applications with QoS. - Nicolas Krommenacker, Vincent Lecuire:
Building industrial communication systems based on IEEE 802.11g wireless technology. - Andreas Willig:
Scheduling multiple streams with (m, k)-firm deadlines having different importance over Markovian channels. - Andreas Miaoudakis, A. Lekkas, Grigorios Kalivas, Stavros A. Koubias:
Radio channel characterization in industrial environments and spread spectrum modem performance. - Paulo Bartolomeu, José Alberto Fonseca, Pedro Duarte, Paulo Maria Rodrigues, Luís Miguel Girão:
MIDI over Bluetooth. - Arndt Lüder, Christian Schwab, Marcus Tangermann, Jörn Peschke:
Formal models for the verification of IEC 61499 function block based control applications. - D. Pollmacher, Wolf Zimmermann, Hans-Michael Hanisch:
Translation validation for model-based code-generators for PLCs. - Andrei Lobov, Jose L. Martinez Lastra, Reijo Tuokko:
On controller and plant modeling for model-based formal verification. - Valeriy Vyatkin, Hans-Michael Hanisch:
Reuse of components in formal modeling and verification of distributed control systems. - Robert Wójcik, Krzysztof Bzdyra, Manuel M. Crisóstomo, Zbigniew Antoni Banaszak:
Constraint programming approach to design of deadlock-free schedules in concurrent production systems. - A. Wegrzyn:
Parallel algorithm for computation of deadlocks and traps in Petri nets. - Francesco M. Raimondi, T. Raimondi, P. Barretta:
Neural Petri control: an application on a mobile robot. - Nicola Cesario, M. Lavorgna, Francesco Pirozzi:
Modelling on-off virtual lambda sensors based on multi-spread probabilistic neural networks. - Guido Maione, Michele Ottomanelli:
A preliminary Petri net model of the transshipment processes in the Taranto container terminal. - Luigi Fortuna, Salvatore Graziani, Maria Gabriella Xibilia:
Cross correlation analysis of residuals for the selection of the structure of virtual sensors in a refinery. - Francesco M. Raimondi, Ludovico S. Ciancimino, Maurizio Melluso:
On-line adaptive neural network in very remote control system. - Riccardo Caponetto, Luigi Fortuna, Alessandro Rizzo:
Neural network modelling of fuel cell systems for vehicles. - Kenzo Kurihara, Nobuyuki Nishiuchi, Jun Hasegawa, Kazuaki Masuda:
Mobile robots path planning method with the existence of moving obstacles. - Jorge Manuel Simões de Almeida, Anibal T. de Almeida, Rui Araújo:
Tracking multiple moving objects for mobile robotics navigation. - Giancarlo Iannizzotto, Francesco La Rosa, Pietro Lanzafame:
An edge-based segmentation technique for 2D still-image with cellular neural networks. - Herbert F. Schweinzer, Peter Krammer:
Scene analysis with ultrasonic sensors. - Armando J. Sousa, Paulo José Costa, A. Paulo Moreira, A. S. Carvalho:
Self localization of an autonomous robot: using an EKF to merge odometry and vision based landmarks. - Salvatore Pennacchio, Davide Rizzo:
Intelligent traction control for wheeled space vehicles. - Alfred C. Weaver:
Distributed Data Security for Factory Automation. 243-244 - K. Loeis, Mohammed Bani Younis, Georg Frey:
Application of symbolic and bounded model checking to the verification of logic control systems. - G. Pratl:
A bionic approach to artificial perception and representation in factory automation. - Daniela Micucci, Marco Oldani, Francesco Tisato:
Real-time reasoning: the case of surveillance systems. - K. M. Deliparaschos, F. I. Nenedakis, Spyros G. Tzafestas:
A fast digital fuzzy logic controller: FPGA design and implementation. - Marek Miskowicz:
Sampling of signals in energy domain. - Francesco Basile, Alessandro Giua, Carla Seatzu:
Decentralized supervisory control of Petri nets with monitor places. - Daniele Corona, Alessandro Giua, Carla Seatzu:
Quantized optimal control of discrete-time systems. - José Yépez, Pau Martí, J. Ayza, Josep M. Fuertes:
LEF closed-loop scheduling policy for real-time control systems. - Luís Gomes, João Paulo Barros, Anikó Costa, Rui Pais, Filipe Moutinho:
Towards usage of formal methods within embedded systems co-design. - Vincenza Carchiolo, Alessandro Longheu, Michele Malgeri:
Production workflows: a model for reuse. - Ulrich Berger, Raffaello Lepratti, Martin May:
An approach for the automatic generation of robot paths from CAD-data. - Atanasko Tuneski, Darko Babunski:
Adaptive identification of the environment characteristics in the contact tasks. - E. R. Cassemiro, João Maurício Rosário, Didier Dumur:
Robot axis dynamics control using a virtual robotics environment. - Luca Ferrarini, Carlo Veber, Giuseppe Fogliazza:
IEC 61499 implementation of a modular control model for manufacturing systems. - Jose L. Martinez Lastra, Andrei Lobov, L. Godinho:
Closed loop control using an IEC 61499 application generator for scan-based controllers. - Manfredi Bruccoleri, C. D'Onofrio, U. La Commare, Francesco M. Raimondi:
UML design and AWL programming for reconfigurable control software development of a robotic manipulator. - Dan Hong Zhang, Jing-Bing Zhang, Yi Zhi Zhao, Ming Mao Wong:
Event-based communications for equipment supervisory control. - Yi Zhi Zhao, Jing-Bing Zhang, Liqun Zhuang, Dan Hong Zhang:
Service-oriented architecture and technologies for automating integration of manufacturing systems and services. - S. Apolloni, M. M. Savino, V. Scocca:
An approach to define quality pointers for a quality management system in ISO9000 environment. - Angelo Furfaro, Libero Nigro:
Model checking hierarchical communicating real-time state machines. - Fabiano Costa Carvalho, Ingrid Jansch-Pôrto, Edison Pignaton de Freitas, Carlos Eduardo Pereira:
The TinyCAN: an optimized CAN controller IP for FPGA-based platforms. - M. J. B. Calha, J. A. G. Fonseca:
Data streams - an analysis of the interactions between real-time tasks. - J. O. Coronel, Francisco Blanes, Ginés Benet, José E. Simó, Pascual Pérez, Miguel Albero Gil:
CAN-based distributed control architecture using the SCoCAN communication protocol. - S. A. Manesis, P. M. Michael:
Fuzzy supervisory control of air flow and temperature in industrial tunnel furnaces. - Matthew C. Trigg, H. Dehbonei, C. V. Nayar:
Digital sinusoidal PWM generation using a low-cost micro-controller based single-phase inverter. - Tullio Facchinetti, Giorgio C. Buttazzo, Luís Almeida:
A flexible visual simulator for wireless ad-hoc networks of mobile nodes. - Fu-Shin Lee, Po-Jia Chen, Shao-Chin Tseng:
Prototyping of a rotary/linear ultrasonic motor. - R. S. Marques, Nicolas Navet, Françoise Simonot-Lion:
Configuration of in-vehicle embedded systems under real-time constraints. - J. A. Carvalho, A. S. Carvalho, Paulo Portugal:
Assessment of PROFIBUS networks using a fault injection framework. - Francisco Borges Carreiro, Ricardo de Moraes, José Alberto Fonseca, Francisco Vasques:
Real-time communication in unconstrained shared Ethernet networks: the virtual token-passing approach. - Javier Silvestre-Blanes, Víctor-M. Sempere-Payá, Teresa Albero-Albero:
Impact of the use of large frame sizes in fieldbuses for multimedia applications. - Patrick Loschmidt, Georg Gaderer, Thilo Sauter:
A software platform architecture for multi-protocol, hardware supported clock synchronization in heterogeneous networks. - Jan Kiszka, Bernardo Wagner:
RTnet - a flexible hard real-time networking framework. - Connor Upton, Gavin J. Doherty:
Designing usable decision support systems for HVM. - Alexandre Dolgui, I. Ihnatsenka:
Machining lines with multi-spindle workstations: a new optimization problem. - Mariagrazia Dotoli, Maria Pia Fanti, Agostino Marcello Mangini, G. Tempone:
Fuzzy multi-objective optimization for network design of logistic and production systems. - David Servat, Fabien Chiron, Khalid Kouiss, Thomas Meurisse, Guy Souchet:
CLIPS: experiments on model-driven engineering for production systems. - Jörn Peschke, Arndt Lüder, Hermann Kühnle:
The PABADIS'PROMISE architecture - a new approach for flexible manufacturing systems. - John V. Gialelis, Athanasios P. Kalogeras, A. Kaklis, Stavros A. Koubias:
RosettaNet-based implementation for a collaborative continuous replenishment planning model utilizing Web services and ontologies. - Juan J. Gude, Evaristo Kahoraho, Julián Hernández, Josu Etxaniz:
Automation and control issues applied to a heat exchanger prototype. - Enrico S. Canuto, Fabio Musso, Luca Massotti:
Automation and control of Fabry-Perot interferometers. - Juan M. Escano, Manuel G. Ortega, Francisco R. Rubio:
Position control of a pneumatic levitation system. - W. Amer, Qaisar Ahsan, Roger I. Grosvenor, Paul W. Prickett:
Machine tool condition monitoring system using tooth rotation energy estimation (TREE) technique. - K. M. Al-Zahrani, Muhammad Shafiq:
Adaptive inverse control with IMC structure implementation on robotic arm manipulator. - Fotis N. Koumboulis, George E. Panagiotakis:
Exact model matching and disturbance rejection for general linear time delay systems via measurement output feedback. - Paolo Lino, Bruno Maione, Alessandro Rizzo:
A control-oriented model of a Common Rail injection system for diesel engines. - Guido Maione:
Combining loop-shaping and Laguerre development for rational approximation of a noninteger order, integral, analog controller. - Paolo Arena, Luigi Fortuna, Mattia Frasca, Giuseppe Lo Turco, Luca Patané, Rosario Russo:
A new simulation tool for action-oriented perception systems. - Ana Fernández, Lara González, Iñigo Bediaga, Ainhoa Gastón, Javier Hernández:
Automatic fault detection and diagnosis implementation based on intelligent approaches. - Carlos Bernal Ruiz, F. E. Garcia-Tapias, Bonifacio Martín-del-Brío, Antonio Bono-Nuez, Nicolás J. Medrano-Marqués:
Microcontroller implementation of a voice command recognition system for human-machine interface in embedded systems. - José Luis López Cuadrado, Israel González-Carrasco, Ángel García-Crespo, H. Ruiz-Mezcua, Y. Fernandez-Heijnen, J. L. Cantero-Guisandez:
Applying an expert system to factory budget calculations. - Omar López, Jose L. Martinez Lastra:
Service-based methodology for controlling reconfigurable mechatronic devices. - Uwe Schmidtmann, Gerd von Cölln, Gerhard Kreutz, Bodo Wenker, Rainer Koers:
Incremental development of production units using HW/SW-encapsulation and simulation supported by a complete toolset. - François Jammes, Harm Smit, Jose L. Martinez Lastra, Ivan M. Delamer:
Orchestration of service-oriented manufacturing processes. - Antoneta I. Bratcu, Alexandre Dolgui, Sana Belmokhtar:
Reconfigurable transfer lines cost optimization - a linear programming approach. - Paulo Leitão, Armando W. Colombo:
An approach towards the development life-cycle of agent-based production control applications. - Jonathan E. Luntz, James R. Moyne, Dawn M. Tilbury:
On-line control reconfiguration at the machine and cell levels: case studies from the reconfigurable factory testbed. - Jean-Pierre Thomesse:
Fieldbus Technology and Industrial Automation. 651-653 - Christian Peter, Helmut Beikirch, Eric Ebert, Matthias Voss:
Wireless sensor network for "intelligent" acquisition and processing of physiological information. - Martino Fornasa, Massimo Maresca, Nicola Zingirian, Lucia Ballardin, Sonia Bedin:
Development of a service-oriented architecture for the dynamic integration of mobile remote software components. - Jean-Luc Scharbarg, Marc Boyer, Jérôme Ermont, Christian Fraboul:
TTCAN over mixed CAN/switched Ethernet architecture. - Jörg Kaiser, Hubert Piontek:
Self-describing devices in COSMIC. - Alfred C. Weaver:
A security architecture for data privacy and security. - Thomas Nolte, Guillermo Rodríguez-Navas, Julián Proenza, Sasikumar Punnekkat, Hans Hansson:
Towards analyzing the fault-tolerant operation of server-CAN. - Mario Barbera, Salvatore Incardona, Giovanni Schembra:
Energy evolution of wireless sensor networks: an analytical approach. - Marco Ortolani, Luca Gatani, Giuseppe Lo Re, Alfonso Urso, Salvatore Gaglio:
An efficient retransmission strategy for data gathering in wireless sensor networks. - Massimo Bergamasco, S. Perotti, Carlo Alberto Avizzano, Marcello Angerilli, Marcello Carrozzino, Emanuele Ruffaldi:
Fork-lift truck simulator for training in industrial environment. - Christine Gertosio, Emilie Grandgirard:
Modelling of distributed system in one single simulation model: a way to study communications within distributed systems. - Taivo Kangilaski:
Virtual organization and supply chain management. - Sotiris Makris, Dimitris Mourtzis, Nikolaos Papakostas, George Chryssolouris:
e-collaboration for ship repair supply chain management. - Pedro F. Santana, José Barata, Hildebrando Cruz, António Mestre, João Lisboa, Luís Flores:
A multi-robot system for landmine detection. - Pedro F. Santana, José Barata:
Unmanned helicopters applied to humanitarian demining. - Daniele Caltabiano, Giovanni Muscato, Angelo Orlando, Cinzia Federico, Gaetano Giudice, Sergio Guerrieri:
Architecture of a UAV for volcanic gas sampling. - Wilfried Elmenreich, Stefan Krywult:
A comparison of fieldbus protocols: LIN 1.3, LIN 2.0, and TTP/A. - Cédric Wilwert, Françoise Simonot-Lion, Yeqiong Song, Françoise Simonot:
Quantitative evaluation of the safety of X-by-Wire architecture subject to EMI perturbations. - Eric Armengaud, Andreas Steininger, Martin Horauer:
Efficient stimulus generation for testing embedded distributed systems the FlexRay example. - Daniel Boto-Giralda, Míriam Antón-Rodríguez, Francisco Javier Díaz Pernas, José Fernando Díez Higuera, David González Ortega, Mario Martínez-Zarzuela:
Intelligent system for dynamic transport fleet management. - A. Bruno, Salvatore Rinaudo, S. F. Liotta, Eva Sciacca:
High-level factory environment for process simulation: an open architecture. - Thomas Werner, Claus Vetter:
Data integrity in electric utility IT systems: a case study. - Javier Silvestre, Rubén Pérez, Javier Muñoz:
Systems integration of a mixed fibre detection process in raw yarn packages by computer vision. - Gianluca Cena, Ivan Cibrario Bertolotti, Adriano Valenzano:
Modelling CANopen communications according to the socket paradigm. - Stefan Pitzek, Wilfried Elmenreich:
Plug-and-play: bridging the semantic gap between application and transducers. - Michael Mock, Stefan Couturier:
Middleware - integration of small devices. - Jürgen Jasperneite, J. Feld:
PROFINET: an integration platform for heterogeneous industrial communication systems. - Marcus Tangermann, Christian Schwab, Arndt Lüder:
Aspect orientation and object orientation of control application code for distributed control systems in TORERO. - Teresa Albero-Albero, Víctor-M. Sempere-Payá, Javier Silvestre-Blanes, P. Dabbas:
Environmental control system based on mobile devices. - Carlos Eduardo Pereira, H. A. Ataide, G. O. Kunz, Edison Pignaton de Freitas, Elias Teodoro Silva Jr., Fabiano Costa Carvalho:
Performance evaluation of Java architectures in embedded real-time systems. - Angelo Corsaro, Corrado Santoro:
The analysis and evaluation of design patterns for distributed real-time Java software. - Rui Pais, S. P. Barros, Luís Gomes:
A tool for tailored code generation from Petri net models. - Simeon Veloudis, Nimal Nissanke:
An approach to modelling and analysis of coordinated atomic actions. - Fauze Valério Polpeta, Antônio Augusto Fröhlich:
On the automatic generation of SoC-based embedded systems. - Benoît Miramond, Jean-Marc Delosme:
Decision guide environment for design space exploration. - Kosmas Alexopoulos, A. Mamassioulas, Dimitris Mourtzis, George Chryssolouris:
Volume and product flexibility: a case study for a refrigerators producing facility. - C. Lalas, Dimitris Mourtzis, Nikolaos Papakostas, George Chryssolouris:
A combinatory approach to order release and shop scheduling in discrete manufacturing environments. - Fabrício Junqueira, Emília Villani, Paulo Eigi Miyagi:
A platform for distributed modeling and simulation of productive systems based on Petri nets and object-oriented paradigm. - Manos J. Georgoudakis, Athanasios P. Kalogeras, Christos Alexakos, Konstantinos J. Charatsis, Stavros A. Koubias:
A holonic ontology-based multi-agent system for the distributed scheduling and monitoring of industrial processes. - Caterina Genua, Silvestro Giuffrida, Salvatore Rinaudo:
"Gantt charts for production flow": a performance analysis framework for shop floor control effectiveness evaluation and monitoring. - Adamo Castelnuovo, Luca Ferrarini:
Petri net models of agent-based control of a FMS with randomly generated recipes. - Francisco Jurado, Manuel Valverde:
Inverter for microturbines based on multiobjective genetic algorithm. - Soizick Calvez, Pascal Aygalinc, Patrice Bonhomme:
Proactive/reactive approach for maintenance tasks in time critical systems. - Muhammad Shafiq, N. R. Butt:
U-model based adaptive IMC for nonlinear dynamic plants. - Luis Rubio, Manuel de la Sen, Asier Ibeas:
An expert mill cutter selection system. - Ramez M. Daoud, Hassanein H. Amer, Hany M. Elsayed:
Fault tolerant two-level pyramid networked control systems. - Fotis N. Koumboulis:
On the heuristic design of common PI controllers for multi-model plants. - Thomas Nolte, Hans Hansson, Lucia Lo Bello:
Automotive communications-past, current and future. - Salvatore Cavalieri:
Outdoor location detection based on signal propagation models. - Christos P. Antonopoulos, Spilios Giannoulis, Stavros A. Koubias, Ioannis Lymperopoulos:
The effect of power consumption on the real time performance of routing protocols for ad hoc wireless networks. - Giancarlo Iannizzotto, Carlo Costanzo, Pietro Lanzafame, Francesco La Rosa:
A vision-based user interface for real-time controlling toy cars. - Spilios Giannoulis, Christos P. Antonopoulos, Evangelos Topalis, Stavros A. Koubias:
ZRP versus DSR and TORA: a comprehensive survey on ZRP performance. - Thomas Fritz, Marc Ségura, Mario Südholt, Egon Wuchner, Jean-Marc Menaud:
Automating adaptive image generation for medical devices using aspect-oriented programming. - Luigi Fortuna:
Waves and locomotion control of bio-inspired robots. - Manuel G. Gericota, Gustavo R. Alves, José M. Ferreira:
A self-healing real-time system based on run-time self-reconfiguration. - Qaisar Ahsan, W. Amer, Roger I. Grosvenor, Paul W. Prickett:
A compact monitoring system for process valves. - Åsa Haglund, Anders Larsson, Piotr Jedrasik, Johan S. Gustavsson:
Sub-wavelength surface grating application for high-power fundamental-mode and polarization stabilization of the VCSELs. - Munir Merdan, Ivanka Terzic, Alois Zoitl, Bernard Favre-Bulle:
Intelligent reconfiguration using knowledge based agent system. - Luís Brito Palma, Fernando Vieira Coito, R. N. da Silva:
Process fault diagnosis approach based on neural observers. - Georg Neugschwandtner, Wolfgang Kastner, Martin Kögler:
Programming fieldbus nodes: a RAD approach to customizable applications. - Jürgen Greifeneder, Georg Frey:
Probabilistic delay time analysis in networked automation systems. - Pedro M. Fonte, J. C. Quadrado:
ANN approach to WECS power forecast. - Akihiro Koretsune, Shingo Aoki, Takefumi Konzo, Hiroshi Tsuji, S. Shimano, Eiji Mimura:
DEA-based data mining for energy consumption. - Seong-Ho Song:
Thermal data correction algorithm for electrical components using infrared camera. - Ana Antunes, Paulo Pedreiras, Alexandre Manuel Mota:
Adapting the sampling period of a real-time adaptive distributed controller to the bus load. - F. R. de la Rocha, R. S. de Oliveira:
A real-time task model based on ideal instant. - Andrea Bottino, Aldo Laurentini:
A practical iterative algorithm for sensor positioning. - Masayuki Nakano, Ryosuke Saga, Hiroshi Tsuji:
Hotel room allocation for sales channel by dynamic programming. - Masanori Akiyoshi, Mariko Matsumoto, Hironori Oka, Norihisa Komoda:
Negotiation protocol for bilateral semi-competitive trading environments. - Masaki Samejima, Shingo Tamura, Yoshitomo Ikkai, Norihisa Komoda:
A scheduling method in multi-item production adjusting to urgent orders based on job modifiability. - Koshichiro Mitsukuni, Yuichi Nakamura, Tomoyuki Aoki:
Total SCM innovation for business globalization based on coupling point inventory planning.
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-12 20:48 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
