CWE-1329: Reliance on Component That is Not Updateable
Weakness ID: 1329
Vulnerability Mapping:ALLOWEDThis CWE ID may be used to map to real-world vulnerabilities Abstraction:
BaseBase - a weakness that is still mostly independent of a resource or technology, but with sufficient details to provide specific methods for detection and prevention. Base level weaknesses typically describe issues in terms of 2 or 3 of the following dimensions: behavior, property, technology, language, and resource.
View customized information:
For users who are interested in more notional aspects of a weakness. Example: educators, technical writers, and project/program managers.For users who are concerned with the practical application and details about the nature of a weakness and how to prevent it from happening. Example: tool developers, security researchers, pen-testers, incident response analysts.For users who are mapping an issue to CWE/CAPEC IDs, i.e., finding the most appropriate CWE for a specific issue (e.g., a CVE record). Example: tool developers, security researchers.For users who wish to see all available information for the CWE/CAPEC entry.For users who want to customize what details are displayed.
×
Edit Custom Filter
Description
The product contains a component that cannot be updated or patched in order to remove vulnerabilities or significant bugs.
Extended Description
If the component is discovered to contain a vulnerability or critical bug, but the issue cannot be fixed using an update or patch, then the product's owner will not be able to protect against the issue. The only option might be replacement of the product, which could be too financially or operationally expensive for the product owner. As a result, the inability to patch or update can leave the product open to attacker exploitation or critical operation failures. This weakness can be especially difficult to manage when using ROM, firmware, or similar components that traditionally have had limited or no update capabilities.
In industries such as healthcare, "legacy"
devices can be operated for decades. As a
US task force report [REF-1197] notes, "the inability
to update or replace equipment has both
large and small health care delivery
organizations struggle with numerous
unsupported legacy systems that cannot
easily be replaced (hardware, software, and
operating systems) with large numbers of
vulnerabilities and few modern
countermeasures."
While hardware can be prone to this weakness, software systems can also be affected, such as when a third-party driver or library is no longer actively maintained or supported but is still critical for the required functionality.
Common Consequences
This table specifies different individual consequences
associated with the weakness. The Scope identifies the application security area that is
violated, while the Impact describes the negative technical impact that arises if an
adversary succeeds in exploiting this weakness. The Likelihood provides information about
how likely the specific consequence is expected to be seen relative to the other
consequences in the list. For example, there may be high likelihood that a weakness will be
exploited to achieve a certain impact, but a low likelihood that it will be exploited to
achieve a different impact.
Scope
Impact
Likelihood
Confidentiality Integrity Access Control Authentication Authorization Other
Technical Impact: Gain Privileges or Assume Identity; Bypass Protection Mechanism; Execute Unauthorized Code or Commands; DoS: Crash, Exit, or Restart; Quality Degradation; Reduce Maintainability
If an attacker can identify an exploitable vulnerability in one product that has no means of patching, the attack may be used against all affected versions of that product.
Potential Mitigations
Phase: Requirements
Specify requirements that each component should be updateable, including ROM, firmware, etc.
Phase: Architecture and Design
Design the product to allow for updating of its components. Include the external infrastructure that might be necessary to support updates, such as distribution servers.
Phases: Architecture and Design; Implementation
With hardware, support patches that can be programmed in-field or during manufacturing through hardware fuses. This feature can be used for limited patching of devices after shipping, or for the next batch of silicon devices manufactured, without changing the full device ROM.
Effectiveness: Moderate
Note:
Some parts of the hardware initialization or signature verification done to authenticate patches will always be "not patchable." Hardware-fuse-based patches will also have limitations in terms of size and the number of patches that can be supported.
Phase: Implementation
Implement the necessary functionality to allow each component to be updated.
Relationships
This table shows the weaknesses and high level categories that are related to this
weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to
similar items that may exist at higher and lower levels of abstraction. In addition,
relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user
may want to explore.
Relevant to the view "Research Concepts" (CWE-1000)
Nature
Type
ID
Name
ChildOf
Pillar - a weakness that is the most abstract type of weakness and represents a theme for all class/base/variant weaknesses related to it. A Pillar is different from a Category as a Pillar is still technically a type of weakness that describes a mistake, while a Category represents a common characteristic used to group related things.
Class - a weakness that is described in a very abstract fashion, typically independent of any specific language or technology. More specific than a Pillar Weakness, but more general than a Base Weakness. Class level weaknesses typically describe issues in terms of 1 or 2 of the following dimensions: behavior, property, and resource.
Base - a weakness that is still mostly independent of a resource or technology, but with sufficient details to provide specific methods for detection and prevention. Base level weaknesses typically describe issues in terms of 2 or 3 of the following dimensions: behavior, property, technology, language, and resource.
Base - a weakness that is still mostly independent of a resource or technology, but with sufficient details to provide specific methods for detection and prevention. Base level weaknesses typically describe issues in terms of 2 or 3 of the following dimensions: behavior, property, technology, language, and resource.
This table shows the weaknesses and high level categories that are related to this
weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to
similar items that may exist at higher and lower levels of abstraction. In addition,
relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user
may want to explore.
Relevant to the view "Hardware Design" (CWE-1194)
Nature
Type
ID
Name
MemberOf
Category - a CWE entry that contains a set of other entries that share a common characteristic.
The different Modes of Introduction provide information
about how and when this
weakness may be introduced. The Phase identifies a point in the life cycle at which
introduction
may occur, while the Note provides a typical scenario related to introduction during the
given
phase.
Phase
Note
Requirements
Requirements development might not consider the importance of updates over the lifetime of the product or might intentionally exclude this capability due to concerns such as expense or speed to market.
Architecture and Design
Lack of planning during architecture development and design, or external pressures such as speed to market, could ignore the capability to update.
Architecture and Design
Designers might omit capabilities for updating a component due to time pressures to release the product or assumptions about the stability of the component.
Implementation
The weakness can appear through oversight during implementation.
Applicable Platforms
This listing shows possible areas for which the given
weakness could appear. These
may be for specific named Languages, Operating Systems, Architectures, Paradigms,
Technologies,
or a class of such platforms. The platform is listed along with how frequently the given
weakness appears for that instance.
Languages
Class: Not Language-Specific
(Undetermined Prevalence)
Operating Systems
Class: Not OS-Specific
(Undetermined Prevalence)
Architectures
Class: Not Architecture-Specific
(Undetermined Prevalence)
Technologies
Class: Not Technology-Specific
(Undetermined Prevalence)
Class: ICS/OT
(Undetermined Prevalence)
Demonstrative Examples
Example 1
A refrigerator has an Internet interface for the official purpose of alerting the manufacturer when that refrigerator detects a fault. Because the device is attached to the Internet, the refrigerator is a target for hackers who may wish to use the device other potentially more nefarious purposes.
(bad code)
Example Language: Other
The refrigerator has no means of patching and is hacked becoming a spewer of email spam.
(good code)
Example Language: Other
The device automatically patches itself and provides considerable more protection against being hacked.
Example 2
A System-on-Chip (SOC) implements a Root-of-Trust (RoT) in ROM to boot secure code. However, at times this ROM code might have security vulnerabilities and need to be patched. Since ROM is immutable, it can be impossible to patch.
ROM does not have built-in application-programming interfaces (APIs) to patch if the code is vulnerable. Implement mechanisms to patch the vulnerable ROM code.
Example 3
The example code is taken from the JTAG module of the buggy OpenPiton SoC of HACK@DAC'21. JTAG is protected with a password checker. Access to JTAG operations will be denied unless the correct password is provided by the user. This user-provided password is first sent to the HMAC module where it is hashed with a secret crypto key. This user password hash (pass_hash) is then compared with the hash of the correct password (exp_hash). If they match, JTAG will then be unlocked.
(bad code)
Example Language: Verilog
module dmi_jtag(...)(...);
...
PassChkValid: begin
if(hashValid) begin
if(exp_hash == pass_hash) begin
pass_check = 1'b1;
end else begin
pass_check = 1'b0;
end
state_d = Idle;
end else begin
state_d = PassChkValid;
end
end
...
hmac hmac(
...
.key_i(256'h24e6fa2254c2ff632a41b...),
...
);
...
endmodule
However, the SoC's crypto key is hardcoded into the design and cannot be updated [REF-1387]. Therefore, if the key is leaked somehow, there is no way to reprovision the key without having the device replaced.
To fix this issue, a local register should be used (hmac_key_reg) to store the crypto key. If designers need to update the key, they can upload the new key through an input port (hmac_key_i) to the local register by enabling the patching signal (hmac_patch_en) [REF-1388].
Chain: network-attached storage (NAS) device has a critical OS command injection (CWE-78) vulnerability that is actively exploited to place IoT devices into a botnet, but some products are "end-of-support" and cannot be patched (CWE-1277). [REF-1097]
Weakness Ordinalities
Ordinality
Description
Primary
(where the weakness exists independent of other weaknesses)
Detection
Methods
Architecture or Design Review
Check the consumer or maintainer documentation, the architecture/design documentation, or the original requirements to ensure that the documentation includes details for how to update the firmware.
Effectiveness: Moderate
Memberships
This MemberOf Relationships table shows additional CWE Categories and Views that
reference this weakness as a member. This information is often useful in understanding where a
weakness fits within the context of external information sources.
Nature
Type
ID
Name
MemberOf
Category - a CWE entry that contains a set of other entries that share a common characteristic.
(this CWE ID may be used to map to real-world vulnerabilities)
Reason:
Acceptable-Use
Rationale:
This CWE entry is at the Base level of abstraction, which is a preferred level of abstraction for mapping to the root causes of vulnerabilities.
Comments:
Carefully read both the name and description to ensure that this mapping is an appropriate fit. Do not try to 'force' a mapping to a lower-level Base/Variant simply to comply with this preferred level of abstraction.
Description
This table specifies different individual consequences
associated with the weakness. The Scope identifies the application security area that is
violated, while the Impact describes the negative technical impact that arises if an
adversary succeeds in exploiting this weakness. The Likelihood provides information about
how likely the specific consequence is expected to be seen relative to the other
consequences in the list. For example, there may be high likelihood that a weakness will be
exploited to achieve a certain impact, but a low likelihood that it will be exploited to
achieve a different impact.
