3.1 fdisk命令分区
n是代表添加新分区
p打印分区表
d删除分区
m打印菜单
q退出
w保存
l查看分区类型
t 指定类型分区
e=扩展分区 p=主分区
[root@KING ~]# fdisk -cu /dev/sdb =》进入第二个磁盘 Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel with disk identifier 0x5cffaf5f. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): p =>查看磁盘是否有分区
Disk /dev/sdb: 106 MB, 106954752 bytes 64 heads, 32 sectors/track, 102 cylinders, total 208896 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5cffaf5f
Device Boot Start End Blocks Id System
Command (m for help): n =》建立一个分区 Command action e extended =》扩展分区 p primary partition (1-4) =》主分区 p =》选择主分区 Partition number (1-4): 1 =》建立第一个主分区 First sector (2048-208895, default 2048): =》第一个起始按回车从2048字节开始分区 Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-208895, default 208895): +10M =》结束分区10M，分给第一个分区10M +size可以加K,M,G为单位来添加 这里是从2048字节开始到哪里结束
Command (m for help): p =》查看分区
Disk /dev/sdb: 106 MB, 106954752 bytes 64 heads, 32 sectors/track, 102 cylinders, total 208896 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5cffaf5f
Device Boot Start End Blocks Id System /dev/sdb1 2048 22527 10240 83 Linux =》第一个分区
Command (m for help): n =》输入n在次分区 Command action e extended p primary partition (1-4) p Partition number (1-4): 2 =>第二个分区 First sector (22528-208895, default 22528): =》起始 Using default value 22528 Last sector, +sectors or +size{K,M,G} (22528-208895, default 208895): +10M =》空间给10M
Command (m for help): p =》查看分区情况
Disk /dev/sdb: 106 MB, 106954752 bytes 64 heads, 32 sectors/track, 102 cylinders, total 208896 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5cffaf5f
Device Boot Start End Blocks Id System /dev/sdb1 2048 22527 10240 83 Linux /dev/sdb2 22528 43007 10240 83 Linux =》共2个主分区
Command (m for help): n =》第三次添加主分区 Command action e extended p primary partition (1-4) p Partition number (1-4): 3 =》第三主分区给数字3 First sector (43008-208895, default 43008): Using default value 43008 Last sector, +sectors or +size{K,M,G} (43008-208895, default 208895): +10M =》同样10M
Command (m for help): p =》查看分区
Disk /dev/sdb: 106 MB, 106954752 bytes 64 heads, 32 sectors/track, 102 cylinders, total 208896 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5cffaf5f
Device Boot Start End Blocks Id System /dev/sdb1 2048 22527 10240 83 Linux /dev/sdb2 22528 43007 10240 83 Linux /dev/sdb3 43008 63487 10240 83 Linux =》共3个主分区
Command (m for help): n =》再次添加分区 Command action e extended p primary partition (1-4) e =》第四次给逻辑分区 Selected partition 4 First sector (63488-208895, default 63488): Using default value 63488 Last sector, +sectors or +size{K,M,G} (63488-208895, default 208895): =》把剩余的空间全部给逻辑分区 Using default value 208895
Command (m for help): p =》查看分区
Disk /dev/sdb: 106 MB, 106954752 bytes 64 heads, 32 sectors/track, 102 cylinders, total 208896 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5cffaf5f
Device Boot Start End Blocks Id System /dev/sdb1 2048 22527 10240 83 Linux /dev/sdb2 22528 43007 10240 83 Linux /dev/sdb3 43008 63487 10240 83 Linux /dev/sdb4 63488 208895 72704 5 Extended =共4个分区
Command (m for help): n 第五次分区给逻辑分区分区 First sector (65536-208895, default 65536): 起始按回车 Using default value 65536 Last sector, +sectors or +size{K,M,G} (65536-208895, default 208895): +10M 结束给10M
Command (m for help): p =》查看分区
Disk /dev/sdb: 106 MB, 106954752 bytes 64 heads, 32 sectors/track, 102 cylinders, total 208896 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5cffaf5f
Device Boot Start End Blocks Id System /dev/sdb1 2048 22527 10240 83 Linux /dev/sdb2 22528 43007 10240 83 Linux /dev/sdb3 43008 63487 10240 83 Linux /dev/sdb4 63488 208895 72704 5 Extended /dev/sdb5 65536 86015 10240 83 Linux =》sdb5逻辑分区的第一个分区
Command (m for help): d =》删除分区 Partition number (1-5): 3 =》选择1至5的分区，删除第三个主分区
Command (m for help): p =》查看分区
Disk /dev/sdb: 106 MB, 106954752 bytes 64 heads, 32 sectors/track, 102 cylinders, total 208896 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5cffaf5f
Device Boot Start End Blocks Id System /dev/sdb1 2048 22527 10240 83 Linux /dev/sdb2 22528 43007 10240 83 Linux =》第三个主分区已经删除掉 /dev/sdb4 63488 208895 72704 5 Extended /dev/sdb5 65536 86015 10240 83 Linux
Command (m for help): L 查看分区类型(把第六个分区指定为LVM 8e)
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris 1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT- 2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT- 3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT- 4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx 5 Extended 42 SFS 86 NTFS volume set da Non-FS data 6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / . 7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility 8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt 9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT f W95 Ext'd (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/ 10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b 11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor 12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor 14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary 16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS 17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE 18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto 1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep 1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT 1e Hidden W95 FAT1
Command (m for help): t =》添加指定类型分区 Partition number (1-6): 6 =》第6个分区 Hex code (type L to list codes): 8e =》为8e (8e是LVM分区可以通过L查看到) Changed system type of partition 6 to 8e (Linux LVM) =》提示分区成功为LVM
Command (m for help): p =》查看分区
Disk /dev/sdb: 106 MB, 106954752 bytes 64 heads, 32 sectors/track, 102 cylinders, total 208896 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5cffaf5f
Device Boot Start End Blocks Id System /dev/sdb1 2048 22527 10240 83 Linux /dev/sdb2 22528 43007 10240 83 Linux /dev/sdb3 43008 63487 10240 83 Linux /dev/sdb4 63488 208895 72704 5 Extended /dev/sdb5 65536 86015 10240 83 Linux /dev/sdb6 88064 108543 10240 8e Linux LVM =》第6个为LVM分区（id为8e）
Command (m for help): w =》保存 The partition table has been altered!
Calling ioctl() to re-read partition table. Syncing disks.
[root@KING ~]# ll /dev/sd* =》查看分区表 brw-rw---- 1 root disk 8, 0 Nov 30 21:51 /dev/sda brw-rw---- 1 root disk 8, 1 Nov 30 21:51 /dev/sda1 brw-rw---- 1 root disk 8, 2 Nov 30 21:51 /dev/sda2 brw-rw---- 1 root disk 8, 3 Nov 30 21:51 /dev/sda3 brw-rw---- 1 root disk 8, 16 Nov 30 22:58 /dev/sdb brw-rw---- 1 root disk 8, 17 Nov 30 22:58 /dev/sdb1 brw-rw---- 1 root disk 8, 18 Nov 30 22:58 /dev/sdb2 brw-rw---- 1 root disk 8, 19 Nov 30 22:58 /dev/sdb3 brw-rw---- 1 root disk 8, 20 Nov 30 22:58 /dev/sdb4 brw-rw---- 1 root disk 8, 21 Nov 30 22:58 /dev/sdb5 brw-rw---- 1 root disk 8, 22 Nov 30 22:58 /dev/sdb6 但是现在操作系统还不知道你分好区了 [root@KING ~]# partprobe /dev/sdb =》这个命令通知操作系统的内核分区表发生改变了，不需要重启服务器
