<Huawei> system-view   //进入全局模式
[Huawei] interface g0/0/0 //进入接口配置模式
[Huawei] sysname SW1		//修改交换机的名称
[Huawei] dispaly history-command	//查看历史命令
[Huawei] dispaly current-configuration	//查看当前生效配置信息
[Huawei] dispaly this		//查看当前视图生效的配置信息

//为console口配置登录密码：
user-infterface con 0
authentication-mode password
set authentication password cipher abc123456

//配置本地登录信息：
aaa
local-user admin password cipher abc123456	//创建一个本地帐户为admin,密码为abc123456
local-user admin privilege level 15		//配置帐户优先级为15，数值越高，权限越大
local-user admin service-type telnet	//配置本地用户接入为telnet
user-interface vty 0 4			//进入VTY0`4用户界面视图
authentication-mode aaa			//配置VTY类型用户验证方式为aaa


//创建、修改和删除vlan
[Huawei] vlan 10	//创建vlan 10
[Huawei] vlan batch 2 to 8 20 to 25	//批量创建vlan 2到8， 20到25；

Access接口加入VLAN
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet0/0/1
[HUAWEI-GigabitEthernet0/0/1] port link-type access  //设置接口的链路类型为Access
[HUAWEI-GigabitEthernet0/0/1] port default vlan 10  //把接口GigabitEthernet0/0/1加入VLAN 10

Trunk接口加入VLAN
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet0/0/1
[HUAWEI-GigabitEthernet0/0/1] port link-type trunk  //设置接口的链路类型为Trunk
[HUAWEI-GigabitEthernet0/0/1] port trunk allow-pass vlan 10  //把接口GigabitEthernet0/0/1加入VLAN 10

Hybrid接口加入VLAN
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet0/0/1
[HUAWEI-GigabitEthernet0/0/1] port link-type hybrid  //设置接口的链路类型为Hybrid
[HUAWEI-GigabitEthernet0/0/1] port hybrid tagged vlan 10  //接口GigabitEthernet0/0/1以Tagged方式加入VLAN 10
[HUAWEI-GigabitEthernet0/0/1] port hybrid untagged vlan 20  //接口GigabitEthernet0/0/1以Untagged方式加入VLAN 20

QinQ接口加入VLAN
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet0/0/1
[HUAWEI-GigabitEthernet0/0/1] port link-type dot1q-tunnel  //设置接口的链路类型为QinQ
[HUAWEI-GigabitEthernet0/0/1] port default vlan 10  //接口GigabitEthernet0/0/1加入VLAN 10

//通过端口组vlan10-group批量添加端口到vlan10
[Huawei] port-group vlan10-group		//创建端品组vlan10-group
[Huawei-port-group-vlan10-group] group-member g0/0/1 to g0/0/10			//为端口组添加1到10号端口
[Huawei-port-group-vlan10-group] port link-type access			//批量修改VLAN链路类型为access
[Huawei-port-group-vlan10-group] port default vlan 10				//批量把端口1-10加入vlan10

将接口类型修改为Access
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet0/0/1
[HUAWEI-GigabitEthernet0/0/1] port link-type access
[HUAWEI-GigabitEthernet0/0/1] port default vlan 10   //设置接口的PVID为VLAN 10，并同时将VLAN 10加入接口

删除单个VLAN10
<HUAWEI> system-view
[HUAWEI] undo vlan 10