工具范本 | 控制系统文档资料交接规范(二)_组态软件

JZGKCHINA

工控技术分享平台


尊重原创 勿抄袭

勿私放其他平台

写在前面



Control System Document & information Handover Specification

控制系统文档资料交接规范


在工业自动化控制系统的项目实施后期,施工单位(系统集成商、撬装设备供应商等)要将相关的图纸资料更新到最终版状态并汇总成为竣工资料,交接给最终用户单位。

 

竣工文档资料的整理,从施工单位角度来说,是项目收尾、资料归档的重要环节,便于日后的查阅与借鉴,同时也是公司项目经验积累的重要组成部分;从最终用户角度来说,是项目竣工之后日常维护、故障检修、升级改造的重要依据。

 

竣工文档资料主要包括图纸、文档、手册、软件(授权)、终版程序等


第一部分:工具范本 | 控制系统文档资料交接规范(一)


具体要求(二):

6. I/O Loop Drawing 信号IO回路图

Whole signal loop connection detail from Field to Module, which should include but not limited to the following:

从现场仪表到控制器模块的完整信号回路连接,包括但不限于以下内容:

  • Instrument Tag  仪表标签编号
  • Terminal Tag  端子标签编号
  • SPD Tag  防浪涌保护器标签编号
  • Reply Tag  继电器标签编号
  • TIA Tag  接线臂标签编号
  • Module Tag  控制器模块标签编号


工具范本 | 控制系统文档资料交接规范(二)_组态软件_02

工具范本 | 控制系统文档资料交接规范(二)_工控_03


工具范本 | 控制系统文档资料交接规范(二)_工控_04

工具范本 | 控制系统文档资料交接规范(二)_控制系统_05



7. I/O List 信号IO清单

All Instrument Tag and related information, which should include but not limited to the following:

所有接入控制器的仪表信号及相关信息,包括但不限于以下内容:

  • Tag Name  信号标签编号
  • Description  描述
    Service Equipment  所属装置
    Instrument Location (Inlet, outlet…) 仪表安装位置(进口、出口……)
    Instrument Type (Pressure, Temperature, Level, Flowrate…)  仪表信号类型(压力、温度、液位、流量……)
  • Signal Type (AI, AO, DI, DO, RS-485……)  信号类型(模拟量输入、输出;数字量输入、输出,串口通讯……)
  • Wiring Connection Location  接线位置
    Cabinet Location  机柜安装位置
    Cabinet Name  机柜编号
    o Rack No.  机架编号
    Slot No.  槽位编号
    Module No.  模块编号
    Channel No.  通道编号
  • Power Supply Type  信号回路供电方式
    o Internal loop supply by Module 模块供电
    External supply by Power source 外接电源供电
  •  …


8. I/O Data Sheet 信号IO数据表

All instrument Tag configuration detail, which should include but not limited to the following:

所有仪表信号组态相关信息,包括但不限于以下内容:

  • Tag Name  信号标签编号
  • Signal type (24VDC, Dry Point, 4~20mA…) 信号类型(24V DC、干接点、4~20mA…)
  • Measurement Range  量程
  • Engineering Unit  工程单位
  • Alarm limit value (HH, H, L, LL)  报警限值(高高、高、低、低低)
  • Control Setpoint 工艺设定值


9. Modbus Address List 通讯Modbus地址表

Whole Modbus communication configuration detail, which should include but not limited to the following:

完整的Modbus通讯组态相关信息,包括但不限于以下内容:

  • IP Address or Com No.  网络IP地址或端号
  • Slave ID  从站地址
  • Serial port setup (9600, 8, None, 1…)  串口配置(波特率、数据长度、校验方式、停止位……)
  • Tag Name  标签名
  • Description  描述
  • Modbus Address 通讯Modbus地址
  • Data type (Float, Integer, Bool…)  数据类型(浮点型、整型、布尔型……)


10.  System Software 系统相关软件

All System related software with the original Manufacture CD, which should include but not limited to the following:

所有控制系统相关软件(原厂安装光盘),包括但不限于以下内容:

  • Workstation OS (Windows 7…) 工作站操作系统
  • Microsoft Office 办公软件
  • HMI Configuration Software  人机界面组态软件
  • Controller (PLC, DCS) Configuration Software  控制器组态软件
  • Network Configuration Software  网络配置组态软件
  • History Database Configuration Software  历史数据库组态软件
  • Report Configuration Software  报表组态软件
  • OPC Configuration Software  通讯OPC组态软件
  • Modbus Configuration Software  通讯Modbus组态软件


11.  License Related 授权相关

All software License, which should include but not limited to the following:

所有控制系统软件相关使用授权,包括但不限于以下内容:

  • USB Dongle  软件加密狗
  • Software file with CD  软授权文件CD
  • Paper license certification  纸质授权证书
  • Technical support certification from Original Manufacture  生产厂家出具的技术支持证书


12.  System Program Backup 系统程序、组态备份

All the configuration and Program with the latest version, which should include but not limited to the following:

所有的终版程序、组态备份,包括但不限于以下内容:

  • HMI Configuration & Program 人机界面组态备份
  • Controller (PLC, DCS) Configuration & Program  控制器程序、组态备份
  • Switch & Network Configuration  网络设备(交换机、路由器、防火墙……)配置备份
  • History Database Configuration  历史数据库组态备份
  • Report Configuration  报表组态备份
  • OPC Configuration  通讯OPC配置备份
  • Modbus Configuration  通讯Modbus组态备份


未完待续......


作者简介



淡定齿轮:

常驻伊拉克油田现场的工控人

油气上游领域自动化过程控制从业多年