华为AR28-31配置PPPoE宽带接入

原创

tzsky 2010-06-08 13:12:53 博主文章分类：路由交换 ©著作权

文章标签 华为配置 PPPoE 宽带 AR28-31 文章分类 网络安全

©著作权归作者所有：来自51CTO博客作者tzsky的原创作品，如需转载，请与作者联系，否则将追究法律责任

拓扑图

配置贴出来

[AR28-31]dis curr
#
sysname AR28-31(配置路由器名称)
#
cpu-usage cycle 1min
#
dialer-rule 1 ip permit(配置Dialer接口)
#
radius scheme system
#
domain system
#
local-user admin
password ******
service-type telnet terminal
level 3
service-type ftp
#
acl number 2001 match-order auto(添加一个ACL用于NAT)
rule 0 permit source 192.168.11.0 0.0.0.255(允许内网用户地址)
rule 1 deny(拒绝其他)
#
interface Aux0
async mode flow
#
interface Dialer1(配置Dialer接口)
link-protocol ppp
ppp pap local-user tzsky password simple 123456
tcp mss 1024
ip address ppp-negotiate
dialer user huawei
dialer bundle 1
dialer-group 1
nat outbound 2001(配置NAT)
#
interface Ethernet0/0
pppoe-client dial-bundle-number 1 (配置PPPoE会话)
ip address dhcp-alloc
#
interface Ethernet0/1
ip address 192.168.11.254 255.255.255.0(配置内网网关)
#
interface NULL0
#
FTP server enable
#
ip route-static 0.0.0.0 0.0.0.0 Dialer 1 preference 60(配置缺省路由)
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
authentication-mode scheme
#
return