一、描述

CentOS安装Apache服务可以有两种方式，一种是用yum安装，一种是从官网下载源代码进行安装。

二、使用yum安装Apache服务

步骤1：在命令行输入如下语句可以使用yum在线更新方式进行安装：

[tong@tong /]$ sudo yum install httpd -y

注意：采用该方式进行安装配置文件的默认路径为：/etc/httpd/conf/httpd.conf

步骤二：配置防火墙，添加下面红色字体的一行，表示开启80端口供客户浏览。

?

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
[tong@tong /]$ sudo vi /etc/sysconfig/iptables
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited

步骤三：配置完防火墙之后需要重新启动防火墙

?

1
2
3
4
5
[tong@tong /]$ sudo service iptables restart
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Flushing firewall rules: [ OK ]
iptables: Unloading modules: [ OK ]
iptables: Applying firewall rules: [ OK ]

步骤四;Apache配置完成后，则可启动服务

?

1
2
3
4
[tong@tong /]$ sudo service httpd start
Starting httpd: httpd: apr_sockaddr_info_get() failed for tong
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
[ OK ]

注意：虽然这里可以启动但是报错，这是因为没有在Apache服务器的配置文件中添加ServerName参数，所以我们要在配置文件中配置这个参数

步骤5：我们查看我们的hostname主机名，并将该主机名添加到Apache配置文件的ServerName参数中

?

1
2
3
4
5
[tong@tong /]$ hostname
tong
[tong@tong /]$ cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=tong

由上述的hostname为tong，则编辑Apache配置文件

[tong@tong conf]$ sudo vi /etc/httpd/conf/httpd.conf

在其中加入一行：ServerName tong:80

步骤5：重新启动Apache服务，则不会报错

?

1
2
3
[tong@tong conf]$ sudo service httpd restart
Stopping httpd: [ OK ]
Starting httpd: [ OK ]

步骤6：测试范例网页

在本机浏览器输入:http://本机IP地址，我的IP为：192.168.200.5,，我在浏览器上输入：http://192.168.200.5

结果显示：

centos6.5安装apache_centos6.5安装apache

知名品牌海天雄Android核心板

【点击进入】

海天雄Android核心板,高端板卡,专业订制 免费申请样品试用,15年行业经验,

查 看


 


三、使用源代码安装Apache服务

步骤1：下载源代码文件

[tong@tong tongSoftware]$ sudo wget http://mirror.bit.edu.cn/apache//httpd/httpd-2.4.12.tar.gz

步骤2；解压并安装

[tong@tong tongSoftware]$ sudo tar xzvf httpd-2.4.12.tar.gz

进入该解压后的目录，输入如下命令：

?

1
2
3
4
5
6
[tong@tong httpd-2.2.29]$ sudo ./configure
 
configure: error: in `/usr/local/tongSoftware/httpd-2.2.29/srclib/apr':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details
configure failed for srclib/apr

系统提示未安装gcc编译器，则安装该编译器

[tong@tong httpd-2.2.29]$ sudo yum install gcc

安装成功后重新编译源文件：

[tong@tong httpd-2.2.29]$ sudo ./configure //检查安装平台是否支持安装

[tong@tong httpd-2.2.29]$ sudomake //根据安装平台进行编译

[tong@tong httpd-2.2.29]$ sudomake install //安装软件

然后按照之前用yum安装的方法配置防火墙，启动Apache服务。