switch2 VLAN_TRUNK_VTP
原创
©著作权归作者所有:来自51CTO博客作者476421477的原创作品,请联系作者获取转载授权,否则将追究法律责任
-----------------VLAN-----------------
1、交换机功能
(1)MAC地址学习(基于源、每个MAC只能从1个端口学习、一个端口可以学习多个)
(2)转发及过滤
(3)loopfree--->stp
2、VLAN--->一个逻辑局域网需求
(1)控制广播域范围
(2)安全需求
(3)管理
3、VLAN特性
(1)一个VLAN对应一个网段
(2)end to end vlan 跨过多个大楼
(3)local vlan 一幢楼
4、配置VLAN
1)配置VLAN
特权和全局配置区别在于VTP修订号增长不一样
2)绑定端口
sw mode access
sw access vlan #
show vlan
5、VLAN范围
1 默认
1002-1005 其它
交换机支持多少个VLAN是跟:型号、VTP 模式
6、MAC地址老化时间
默认300
Switch#sh mac address-table aging-time
Global Aging Time: 300
Vlan Aging Time
---- ----------
Switch(config)#mac address-table aging-time 150
-----------------Trunk-----------------
1、trunk 一条能传输多个VLAN信息链路
2、trunk标记技术
isl: cisco 30byte 封装
802.1q: 标准 4byte 标记
802.1q 帧结构:以太网类型 pri(QOS标记数据) tokenring vlanid=12可以标记4096个vlan
3、native vlan 不打标签的vlan
默认是vlan 1
Switch#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/24 auto n-isl trunking 1
可以修改native vlan ,但是要求二边的native vlan要一致
如果不一致,会有环路的可能
Switch(config-if)#sw trunk native vlan #
4、trunk 模式
手工:强制配置为trunk on
动态:DTP
dynamic desirable:主动发包去协商
dynamic auto 被动响应
on---->on 可以
on---->dd 可以
on---->da 可以
dd---->dd 可以
dd---->da 可以
da---->da 不可以
5、配置
Switch#sh int trunk查看trunk
Port Mode Encapsulation Status Native vlan
Fa0/24 auto n-isl trunking 1
Switch#sh int f0/24 sw
Name: Fa0/24
Switchport: Enabled
Administrative Mode: dynamic auto
3550(config-if)#sw tr encapsulation dot1q
3550(config-if)#sw mode trunk
3550(config-if)#sw mode dynamic auto
最佳实践:
3550(config-if)#sw nonegotiate
3550(config-if)#sw mode trunk
Switch(config-if)#sw trunk encapsulation dot1q
Switch(config-if)#sw nonegotiate
6、native vlan 不一致导致不同vlan互通
3550(config)#int vlan 1
3550(config-if)#ip add 1.1.1.1 255.255.255.0
3550#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/48 on 802.1q trunking 1
3550#sh spanning-tree
VLAN0001
---------------- ---- --- --------- -------- --------------------------------
Fa0/48 Desg BKN*19 128.48 P2p *PVID_Inc
3560(config)#int vlan 2
3560(config-if)#ip add 1.1.1.2 255.255.255.0
3560#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/24 on 802.1q trunking 2
3550(config)#no spanning-tree vlan 1
3550#ping 1.1.1.2
.!!!!
-----------------VTP-----------------
1、VTP作用:同步vlan达到简化vlan 的配置
2、VTP同步条件:trunk、域名、密码
3、VTP同步依据:修订号---反映vlan变化(增加、删除、更改)
高的同步低的
4、vtp mode
add/del/mod 同步 转发 保存位置
server: 可以 可以 可以 vlan.dat
client 不可以 可以 可以 vlan.dat
transparent 可以 不可以 可以(域名) 配置
5、配置
3550#sh vtp status
VTP Version :running VTP1 (VTP2 capable) 版本号
Configuration Revision : 0 修订号
Maximum VLANs supported locally : 1005 最大支持vlan数
Number of existing VLANs : 5 现存vlan数
VTP Operating Mode : Server VTP模式
VTP Domain Name : 域名
VTP Pruning Mode : Disabled 是否启用pruning
VTP V2 Mode : Disabled 是否用的版本2
VTP Traps Generation : Disabled
MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Local updater ID is 0.0.0.0(no valid interface found)
3550#sh vtp password
The VTP password is not configured.
3550(config)#vtp domain chuyue100
3550(config)#vtp password chuyue100
3560(config)#vtp mode transparent
6、VTP修剪
减少没有必要广播流量
3560#sh int trunk
Port Vlans in spanning tree forwarding state and not pruned
Fa0/24 1-4
3560# sh cdp nei detail
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
Switch Fas 0/23 143 S I WS-C2960- Fas 0/23
Switch Fas 0/24 179 S I WS-C2960- Fas 0/24
邻居名字 自己接口 存活时间 对方类型 平台 对方接口
3550(config)#vtp pruning
7、防止加交换机时把现网的vlan同步掉---->修订号清0
(1)删除vlan.dat
(2)改为透明模式:修订号永远为0
(3)改域名
实验:
native vlan 不一致
VTP 修剪
排错
上一篇:switch1 课程相关
下一篇:switch3 STP、RSTP

提问和评论都可以,用心的回复会被更多人看到
评论
发布评论
相关文章
-
VTP(Vlan Trunk协议)
VTP介绍
职场 休闲 vtp 介绍