https://cf.trackerslist.com/best.txt
数字万用表，二极管档 红笔 GND 黑笔 GPIO 0.5xx 黑笔 VCC 3.3V 红笔 GPIO 0.5xx
jpnevulator安装： apt install jpnevulator 运行： jpnevulator --tty=/dev/ttyS4 --pty --pass --read --ascii --timing-print
// 将 NV12 转换为 BGR void nv12ToBgr(const unsigned char* yuvData, int width, int height, Mat& bgrImage) { // 计算每个平面的大小 int ySi
void crop_yuv420_sp(unsigned char *srcbuf, int src_width, int src_height, unsigned char *dstbuf, int x, int y, int w, int h) { int i; int dst_y_size =
apt install lightdm 然后选择lightdm reboot 重新选择 dpkg-reconfigure lightdm nano /usr/share/lightdm/lig
1.sudo nano /etc/pam.d/gdm-autologinsudo nano /etc/pam.d/gdm-password #auth required pam_succeed_if.so user != root quiet_success 2.sudo nano /root/.p
ssh-keygen -t rsa -b 4096 -C "your_email@example.com" ssh-copy-id -p 1234 root@ddns.1.2 Host ddns.1.2 HostName ddns.1.2 User root Po
gpedit.msc 计算机配置-管理模板-网络-Lanman工作站”， 启用不安全的来宾登录
NAT机器 ifconfig enp0s20f0u1i2 192.168.1.1 netmask 255.255.255.0 echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 192.168.1.0/24
rockchip,pins = /* uart4_rxm0 */ <1 RK_PA4 2 &pcfg_pull_up>, /* uart4_txm0 */ <1 RK_PA6 2 &pcfg_pull_up>;
设置 terminal.integrated.scrollback
sysroot/usr/include/linux/version.h kernel/include/generated/uapi/linux/version.h #define LINUX_VERSION_CODE 330306 0x50A42 = 5.10.66 #define LINUX_VE
alias dkrun='docker run -it --rm --network host -e USER_ID=0 --mount type=bind,source="$PWD",target="/home/project" harbor.meda.test/seafile/buildroot
Copyright © 2005-2025 51CTO.COM 版权所有 京ICP证060544号
