{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,8,7]],"date-time":"2024-08-07T01:09:49Z","timestamp":1722992989064},"reference-count":20,"publisher":"Fuji Technology Press Ltd.","issue":"4","content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":["IJAT","Int. J. Automation Technol."],"published-print":{"date-parts":[[2020,7,5]]},"abstract":"This research proposes a method to achieve laser quenching and laser forming simultaneously. This technique uses a diode laser to produce thin steel sheet-assuming parts, such as springs and hinges. Energy and time are saved by combining the advantages of laser quenching, which has high input heat efficiency, and laser forming, which, unlike press molding, does not require metal molds. In this study, laser-quenching molding was performed for an entire thin steel plate, and the influence on warping was investigated. Furthermore, the proposed method was evaluated under repeated quenchings for different cross-sections of a workpiece. The results indicated that the technique prevented bending deformation during the next laser scan and reduced warping by increasing the second moment of area of the entire workpiece.<\/jats:p>","DOI":"10.20965\/ijat.2020.p0592","type":"journal-article","created":{"date-parts":[[2020,7,4]],"date-time":"2020-07-04T11:02:07Z","timestamp":1593860527000},"page":"592-600","source":"Crossref","is-referenced-by-count":1,"title":["Influence of Grooved Plate Cross-Sectional Shape on Bending Phenomena in Laser-Quenching Forming Process"],"prefix":"10.20965","volume":"14","author":[{"given":"Yuki","family":"Manabe","sequence":"first","affiliation":[]},{"name":"Doshisha University 1-3 Tataramiyakodani, Kyotanabe-shi, Kyoto 610-0394, Japan","sequence":"first","affiliation":[]},{"given":"Hiromichi","family":"Nishida","sequence":"additional","affiliation":[]},{"given":"Toshiki","family":"Hirogaki","sequence":"additional","affiliation":[]},{"given":"Eiichi","family":"Aoyama","sequence":"additional","affiliation":[]}],"member":"8550","published-online":{"date-parts":[[2020,7,5]]},"reference":[{"key":"key-10.20965\/ijat.2020.p0592-1","unstructured":"Y. Okazaki, T. Mori, and N. Morita, \u201cDesktop NC milling machine with 200 krpm spindle,\u201d Proc. of 2001 ASPE Annual Meeting, pp. 192-195, 2001."},{"key":"key-10.20965\/ijat.2020.p0592-2","unstructured":"M. Sakagami, \u201cLatest Trends in Foreign Injection Molding Machines and Technologies (Part 1) Accelerating Eco-Molding, Pursuing Efficiency, and Improving Productivity Through Process Integration,\u201d Plastics Age, Vol.61, No.10, pp. 90-95, 2015 (in Japanese)."},{"key":"key-10.20965\/ijat.2020.p0592-3","doi-asserted-by":"crossref","unstructured":"A. K. Dubey and V. Yadava, \u201cLaser beam machining: a review,\u201d Int. J. of Machine Tool and Manufacture, Vol.48, No.6, pp. 609-628, 2008.","DOI":"10.1016\/j.ijmachtools.2007.10.017"},{"key":"key-10.20965\/ijat.2020.p0592-4","doi-asserted-by":"crossref","unstructured":"D. Gu, W. Meiners, K. Wissenbach, and R. Poprawe, \u201cLaser additive manufacturing of metallic components: materials, processes and mechanisms,\u201d Int. Materials Reviews, Vol.57, No.3, pp. 133-164, 2012.","DOI":"10.1179\/1743280411Y.0000000014"},{"key":"key-10.20965\/ijat.2020.p0592-5","doi-asserted-by":"crossref","unstructured":"N. C. Peterson, M. J. Kurylo, A. M. Bass, and R. A. Keller, \u201cEnhancement of Absorption Spectra by Dye-Laser Quenching,\u201d J. of the Optical Society of America, Vol.61, No.6, pp. 746-750, 1971.","DOI":"10.1364\/JOSA.61.000746"},{"key":"key-10.20965\/ijat.2020.p0592-6","doi-asserted-by":"crossref","unstructured":"J. S. Selvan, K. Subramanian, and A. K. Nath, \u201cEffect of laser surface hardening on En18 (AISI 5135) steel,\u201d J. of Materials Processing Technology, Vol.91, Issues 1-3, pp. 29-36, 1999.","DOI":"10.1016\/S0924-0136(98)00430-0"},{"key":"key-10.20965\/ijat.2020.p0592-7","unstructured":"E. C. Santos, M. Shiomi, K. Osakada, and T. Laoui, \u201cRapid manufacturing of metal components by laser forming,\u201d Int. J. of Machine Tools and Manufacture, Vol.46, Issues 12-13, pp. 1459-1468, 2006."},{"key":"key-10.20965\/ijat.2020.p0592-8","doi-asserted-by":"crossref","unstructured":"M. Merklein, T. Hennige, and M. Geiger, \u201cLaser forming of aluminium and aluminium alloys \u2013 microstructural investigation,\u201d J. of Materials Processing Technology, Vol.115, No.1, pp. 159-165, 2001.","DOI":"10.1016\/S0924-0136(01)00759-2"},{"key":"key-10.20965\/ijat.2020.p0592-9","doi-asserted-by":"crossref","unstructured":"Y. Manabe, R. Oda, T. Hirogaki, E. Aoyama, and K. Ogawa, \u201cWhole Quenching of Small Thin Plate with Low-Power Semiconductor Laser Based on Feed-Speed Combination Problem,\u201d Int. J. Automation Technol., Vol.10, No.6, pp. 923-933, 2016.","DOI":"10.20965\/ijat.2016.p0923"},{"key":"key-10.20965\/ijat.2020.p0592-10","unstructured":"Y. Manabe, H. Nishida, T. Hirogaki, E. Aoyama, and K. Ogawa, \u201cInvestigation of deformation in laser quenching forming for thin steel plate based on process monitoring,\u201d J. of the Japan Society for Abrasive Technology, Vol.62, No.11, pp. 571-577, 2018 (in Japanese)."},{"key":"key-10.20965\/ijat.2020.p0592-11","unstructured":"Y. Manabe, T. Hirogaki, E. Aoyama, and K. Ogawa, \u201cLaser quenching forming method for thin steel plate under preheating conditions,\u201d J. of the Japan Society for Abrasive Technology, Vol.62, No.1, pp. 26-32, 2018 (in Japanese)."},{"key":"key-10.20965\/ijat.2020.p0592-12","doi-asserted-by":"crossref","unstructured":"F. Lucas, \u201cStructure and nature of troostite,\u201d The Bell System Technical J., Vol.9, No.1, pp. 101-120, 1930.","DOI":"10.1002\/j.1538-7305.1930.tb01250.x"},{"key":"key-10.20965\/ijat.2020.p0592-13","unstructured":"N. Shiramine, T. Noguchi, and M. Nishikawa, \u201cStrength Properties of Ferrite-Martensite and Ferrite-Solvite Duplex Steels,\u201d Japan Heat Treatment Technology Association, Vol.28, No.3, pp. 133-139, 1988 (in Japanese)."},{"key":"key-10.20965\/ijat.2020.p0592-14","doi-asserted-by":"crossref","unstructured":"V. P. Akhant\u2019ev and V. I. Ivlev, \u201cThe nature of troostite in surface layers of steels after carburizing,\u201d Metal Science and Heat Treatment, Vol.7, No.2, pp. 180-181, 1975.","DOI":"10.1007\/BF00679178"},{"key":"key-10.20965\/ijat.2020.p0592-15","doi-asserted-by":"crossref","unstructured":"S. P. Edwardson, E. Abed, K. Bartkowiak, G. Dearden, and K. G. Watkins, \u201cGeometrical influences on multi-pass laser forming,\u201d J. of Physics D, Applied Physics, Vol.39, No.2, pp. 382-389, 2006.","DOI":"10.1088\/0022-3727\/39\/2\/021"},{"key":"key-10.20965\/ijat.2020.p0592-16","unstructured":"O. Manca, B. Morrone, and V. Naso, \u201cQuasi-steady-state three dimensional temperature distribution induced by a moving circular Gaussian heat source in a finite depth solid,\u201d Int. J. of Heat and Mass Transfer, Vol.38, Issue 7, pp. 1305-1315, 1995."},{"key":"key-10.20965\/ijat.2020.p0592-17","unstructured":"M. Nunobiki, J. Hayashi, H. Shizuka, and K. Okuda, \u201cDeformation analysis of Ti sheet in laser forming along the edge of the sheet, the 2nd report: Estimation of area where the edge of sheet influences the bending angle,\u201d Proc. of JSPE Semestrial Meeting, pp. 583-584, 2013 (in Japanese)."},{"key":"key-10.20965\/ijat.2020.p0592-18","doi-asserted-by":"crossref","unstructured":"T. Ueda, K. Yamada, S. Oikawa, and A. Hosokawa, \u201cBasic Study of Laser Forming,\u201d J. of the Japan Society for Precision Engineering, Vol.67, No.2, pp. 300-305, 2001 (in Japanese).","DOI":"10.2493\/jjspe.67.300"},{"key":"key-10.20965\/ijat.2020.p0592-19","unstructured":"F. Vollertson, \u201cMechanisms and Models for Laser Forming,\u201d Proc. of Laser Assisted Net Shape Engineering Conf., 345, 1994."},{"key":"key-10.20965\/ijat.2020.p0592-20","doi-asserted-by":"crossref","unstructured":"H. Shen and F. Vollertsen, \u201cModelling of laser forming \u2013 An review,\u201d Computational Materials Science, Vol.46, No.4, pp. 834-840, 2009.","DOI":"10.1016\/j.commatsci.2009.04.022"}],"container-title":["International Journal of Automation Technology"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/www.fujipress.jp\/main\/wp-content\/themes\/Fujipress\/phyosetsu.php?ppno=IJATE001400040008","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2020,7,4]],"date-time":"2020-07-04T11:03:30Z","timestamp":1593860610000},"score":1,"resource":{"primary":{"URL":"https:\/\/www.fujipress.jp\/ijat\/au\/ijate001400040592"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2020,7,5]]},"references-count":20,"journal-issue":{"issue":"4","published-online":{"date-parts":[[2020,7,5]]},"published-print":{"date-parts":[[2020,7,5]]}},"URL":"https:\/\/doi.org\/10.20965\/ijat.2020.p0592","relation":{},"ISSN":["1883-8022","1881-7629"],"issn-type":[{"type":"electronic","value":"1883-8022"},{"type":"print","value":"1881-7629"}],"subject":[],"published":{"date-parts":[[2020,7,5]]}}}