{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2025,3,24]],"date-time":"2025-03-24T08:24:18Z","timestamp":1742804658658},"reference-count":25,"publisher":"Fuji Technology Press Ltd.","issue":"3","content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":["IJAT","Int. J. Automation Technol."],"published-print":{"date-parts":[[2020,5,5]]},"abstract":"This paper investigates the machining stability in ball-end-milling of curved surface in which the inclination of tool continuously changes. Initially, the influence of inclination angle is geometrically investigated on the parameters such as immersion angle and cutting velocity. Then, the paper presents the stability lobe diagrams of the process. Curved surface milling is simulated by slot milling on a cylindrical workpiece using a ball-end-mill to obtain the cutting force and vibration, which are used for fast-Fourier transform and Hilbert-Huang transform (HHT) analyses. Experimental results show that the cutting force increases, and the stability becomes worse with the inclination angle, while the machining errors decrease with the inclination. The vibration analysis showed that the HHT can detect the transition from stable to unstable during milling of curved surface in the time-frequency plots.<\/jats:p>","DOI":"10.20965\/ijat.2020.p0500","type":"journal-article","created":{"date-parts":[[2020,5,4]],"date-time":"2020-05-04T15:02:06Z","timestamp":1588604526000},"page":"500-511","source":"Crossref","is-referenced-by-count":6,"title":["Hilbert-Huang Transform Analysis of Machining Stability in Ball-Nose End-Milling of Curved Surface"],"prefix":"10.20965","volume":"14","author":[{"given":"Muizuddin","family":"Azka","sequence":"first","affiliation":[]},{"given":"Keiji","family":"Yamada","sequence":"additional","affiliation":[]},{"given":"Mahfudz Al","family":"Huda","sequence":"additional","affiliation":[]},{"given":"Kyosuke","family":"Mani","sequence":"additional","affiliation":[]},{"given":"Ryutaro","family":"Tanaka","sequence":"additional","affiliation":[]},{"given":"Katsuhiko","family":"Sekiya","sequence":"additional","affiliation":[]},{"name":"Graduate School of Engineering, Hiroshima University 1-4-1 Kagamiyama, Higashi-hiroshima, Hiroshima 739-8527, Japan","sequence":"additional","affiliation":[]},{"name":"Agency for the Assessment and Application of Technology (BPPT), Central Jakarta, Indonesia","sequence":"additional","affiliation":[]},{"name":"Ground Systems Research Center, Acquisition, Technology & Logistics Agency (ATLA), Sagamihara, Japan","sequence":"additional","affiliation":[]}],"member":"8550","published-online":{"date-parts":[[2020,5,5]]},"reference":[{"key":"key-10.20965\/ijat.2020.p0500-1","doi-asserted-by":"crossref","unstructured":"Y. Altintas and M. Weck, \u201cChatter stability of metal cutting and grinding,\u201d CIRP Annals, Vol.53, No.2, pp. 619-642, 2004.","DOI":"10.1016\/S0007-8506(07)60032-8"},{"key":"key-10.20965\/ijat.2020.p0500-2","doi-asserted-by":"crossref","unstructured":"J. Tlusty, \u201cDynamics of high-speed milling,\u201d J. of Engineering for Industry, Vol.108, No.2, pp. 59-67, 1986.","DOI":"10.1115\/1.3187052"},{"key":"key-10.20965\/ijat.2020.p0500-3","doi-asserted-by":"crossref","unstructured":"Y. Altinta\u015f and E. Budak, \u201cAnalytical prediction of stability lobes in milling,\u201d CIRP Annals, Vol.44, No.1, pp. 357-362, 1995.","DOI":"10.1016\/S0007-8506(07)62342-7"},{"key":"key-10.20965\/ijat.2020.p0500-4","doi-asserted-by":"crossref","unstructured":"Y. Altintas, E. Shamoto, P. Lee, and E. Budak, \u201cAnalytical prediction of stability lobes in ball end milling,\u201d J. of Manufacturing Science and Engineering, Vol.121, No.4, pp. 586-592, 1999.","DOI":"10.1115\/1.2833064"},{"key":"key-10.20965\/ijat.2020.p0500-5","doi-asserted-by":"crossref","unstructured":"Y. Altintas, \u201cAnalytical prediction of three dimensional chatter stability in milling,\u201d JSME Int. J. Series C, Vol.44, No.3, pp. 717-723, 2001.","DOI":"10.1299\/jsmec.44.717"},{"key":"key-10.20965\/ijat.2020.p0500-6","doi-asserted-by":"crossref","unstructured":"E. Shamoto and K. Akazawa, \u201cAnalytical prediction of chatter stability in ball end milling with tool inclination,\u201d CIRP Annals, Vol.58, No.1, pp. 351-354, 2009.","DOI":"10.1016\/j.cirp.2009.03.087"},{"key":"key-10.20965\/ijat.2020.p0500-7","doi-asserted-by":"crossref","unstructured":"G. U. Pelayo, \u201cModelling of static and dynamic milling forces in inclined operations with circle-segment end mills,\u201d Precision Engineering, Vol.56, pp. 123-135, 2019.","DOI":"10.1016\/j.precisioneng.2018.11.007"},{"key":"key-10.20965\/ijat.2020.p0500-8","unstructured":"G. Urbikain, D. Olvera, and L. de Lacalle, \u201cStability contour maps with barrel cutters considering the tool orientation,\u201d The Int. J. of Advanced Manufacturing Technology, Vol.89, Nos.9-12, pp. 2491-2501, 2017."},{"key":"key-10.20965\/ijat.2020.p0500-9","doi-asserted-by":"crossref","unstructured":"E. Budak, L. T. Tun\u00e7, S. Alan, and H. N. \u00d6zg\u00fcven, \u201cPrediction of workpiece dynamics and its effects on chatter stability in milling,\u201d CIRP Annals \u2013 Manufacturing Technology, Vol.61, No.1, pp. 339-342, 2012.","DOI":"10.1016\/j.cirp.2012.03.144"},{"key":"key-10.20965\/ijat.2020.p0500-10","doi-asserted-by":"crossref","unstructured":"S. Alan, E. Budak, and H. N. \u00d6zg\u00fcven, \u201cAnalytical prediction of part dynamics for machining stability analysis,\u201d Int. J. Automation Technol., Vol.4, No.3, pp. 259-267, 2010.","DOI":"10.20965\/ijat.2010.p0259"},{"key":"key-10.20965\/ijat.2020.p0500-11","doi-asserted-by":"crossref","unstructured":"W. Arai, F. Tanaka, and M. Onosato, \u201cError estimation of machined surfaces in multi-axis machining with machine tool errors including tool self-intersecting motion based on high-accuracy tool swept volumes,\u201d Int. J. Automation Technol., Vol.12, No.5, pp. 680-687, 2018.","DOI":"10.20965\/ijat.2018.p0680"},{"key":"key-10.20965\/ijat.2020.p0500-12","doi-asserted-by":"crossref","unstructured":"K.-D. Bouzakis, P. Aichouh, and K. Efstathiou, \u201cDetermination of the chip geometry, cutting force and roughness in free form surfaces finishing milling, with ball end tools,\u201d Int. J. of Machine Tools and Manufacture, Vol.43, No.5, pp. 499-514, 2003.","DOI":"10.1016\/S0890-6955(02)00265-1"},{"key":"key-10.20965\/ijat.2020.p0500-13","doi-asserted-by":"crossref","unstructured":"K. Shimana, E. Kondo, H. Karashima, and N. Kawagoishi, \u201cFast detection of chatter in end-milling using pseudo auto-correlation function,\u201d Int. J. Automation Technol., Vol.6, No.6, pp. 728-735, 2012.","DOI":"10.20965\/ijat.2012.p0728"},{"key":"key-10.20965\/ijat.2020.p0500-14","doi-asserted-by":"crossref","unstructured":"Y. Altintas, G. Stepan, D. Merdol, and Z. Dombovari, \u201cChatter stability of milling in frequency and discrete time domain,\u201d CIRP J. of Manufacturing Science and Technology, Vol.1, No.1, pp. 35-44, 2008.","DOI":"10.1016\/j.cirpj.2008.06.003"},{"key":"key-10.20965\/ijat.2020.p0500-15","doi-asserted-by":"crossref","unstructured":"T. Kalvoda and Y.-R. Hwang, \u201cA cutter tool monitoring in machining process using Hilbert-Huang transform,\u201d Int. J. of Machine Tools and Manufacture, Vol.50, No.5, pp. 495-501, 2010.","DOI":"10.1016\/j.ijmachtools.2010.01.006"},{"key":"key-10.20965\/ijat.2020.p0500-16","unstructured":"N. Mehala and R. Dahiya, \u201cA comparative study of FFT, STFT and wavelet techniques for induction machine fault diagnostic analysis,\u201d Proc. of the 7th WSEAS Int. Conf. on Computational Intelligence, Man-Machine Systems and Cybernetics, pp. 203-208, 2008."},{"key":"key-10.20965\/ijat.2020.p0500-17","doi-asserted-by":"crossref","unstructured":"A. Susanto, C.-H. Liu, K. Yamada et al., \u201cMilling process monitoring based on vibration analysis using Hilbert-Huang transform,\u201d Int. J. Automation Technol., Vol.12, No.5, pp. 688-698, 2018.","DOI":"10.20965\/ijat.2018.p0688"},{"key":"key-10.20965\/ijat.2020.p0500-18","doi-asserted-by":"crossref","unstructured":"A. Susanto, C.-H. Liu, K. Yamada et al., \u201cApplication of Hilbert-Huang transform for vibration signal analysis in end-milling,\u201d Precision Engineering, Vol.53, pp. 263-277, 2018.","DOI":"10.1016\/j.precisioneng.2018.04.008"},{"key":"key-10.20965\/ijat.2020.p0500-19","doi-asserted-by":"crossref","unstructured":"H. Cao, Y. Lei, and Z. He, \u201cChatter identification in end milling process using wavelet packets and Hilbert-Huang transform,\u201d Int. J. of Machine Tools and Manufacture, Vol.69, pp. 11-19, 2013.","DOI":"10.1016\/j.ijmachtools.2013.02.007"},{"key":"key-10.20965\/ijat.2020.p0500-20","doi-asserted-by":"crossref","unstructured":"N. E. Huang and S. S. P. Shen (Eds.), \u201cHilbert-Huang Transform and its Applications,\u201d World Scientific, 2005.","DOI":"10.1142\/5862"},{"key":"key-10.20965\/ijat.2020.p0500-21","doi-asserted-by":"crossref","unstructured":"X. Zhou, M. Luo, D. Zhang, and W. Liu, \u201cCutting force prediction in four-axis milling of curved surfaces with bull-nose end mill,\u201d Procedia CIRP, Vol.56, pp. 100-104, 2016.","DOI":"10.1016\/j.procir.2016.10.027"},{"key":"key-10.20965\/ijat.2020.p0500-22","doi-asserted-by":"crossref","unstructured":"Y. Altintas, \u201cManufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC design \u2013 second edition,\u201d pp. 92-98, Cambridge University Press, 2012.","DOI":"10.1017\/CBO9780511843723"},{"key":"key-10.20965\/ijat.2020.p0500-23","unstructured":"Z. Li, Z. Wang, and X. Shi, \u201cFast prediction of chatter stability lobe diagram for milling process using frequency response function or modal parameters,\u201d The Int. J. of Advanced Manufacturing Technology, Vol.89, pp. 2603-2612, 2017."},{"key":"key-10.20965\/ijat.2020.p0500-24","doi-asserted-by":"crossref","unstructured":"J. Gradis\u011bk, M. Kalveram, and K. Weinert, \u201cMechanistic identification of specific force coefficients for a general end mill,\u201d Int. J. of Machine Tools and Manufacture, Vol.44, pp. 401-414, 2004.","DOI":"10.1016\/j.ijmachtools.2003.10.001"},{"key":"key-10.20965\/ijat.2020.p0500-25","doi-asserted-by":"crossref","unstructured":"Q. Cao, J. Zhao et al., \u201cForce coefficients identification considering inclination angle for ball-end finish milling,\u201d Precision Engineering, Vol.36, No.2, pp. 252-260, 2012.","DOI":"10.1016\/j.precisioneng.2011.10.007"}],"container-title":["International Journal of Automation Technology"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/www.fujipress.jp\/main\/wp-content\/themes\/Fujipress\/phyosetsu.php?ppno=IJATE001400030016","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2022,10,23]],"date-time":"2022-10-23T00:31:18Z","timestamp":1666485078000},"score":1,"resource":{"primary":{"URL":"https:\/\/www.fujipress.jp\/ijat\/au\/ijate001400030500"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2020,5,5]]},"references-count":25,"journal-issue":{"issue":"3","published-online":{"date-parts":[[2020,5,5]]},"published-print":{"date-parts":[[2020,5,5]]}},"URL":"https:\/\/doi.org\/10.20965\/ijat.2020.p0500","relation":{},"ISSN":["1883-8022","1881-7629"],"issn-type":[{"type":"electronic","value":"1883-8022"},{"type":"print","value":"1881-7629"}],"subject":[],"published":{"date-parts":[[2020,5,5]]}}}