{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,8,8]],"date-time":"2024-08-08T02:52:37Z","timestamp":1723085557955},"reference-count":21,"publisher":"Fuji Technology Press Ltd.","issue":"4","content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":["Int. J. Automation Technol.","IJAT"],"published-print":{"date-parts":[[2016,7,5]]},"abstract":"To improve the machining preciseness of X-ray telescope mirrors for astronomical use, the molds of electroless nickel and electro nickel are diamond-turned, and the tool wear and machining accuracy are then quantitatively evaluated. The machined surface roughness is measured and discussed in terms of the effects of cutting conditions on the resulting quality. Finally, the actual nickel-plated molds of X-ray mirrors are test cut, and their form accuracy and surface roughness are measured and evaluated. These experiments reveal that a surface roughness of 0.5 nm Ra and a form accuracy of 0.1 \u03bcm P-V can be obtained under the optimized cutting conditions.<\/jats:p>","DOI":"10.20965\/ijat.2016.p0624","type":"journal-article","created":{"date-parts":[[2016,7,5]],"date-time":"2016-07-05T09:31:52Z","timestamp":1467711112000},"page":"624-631","source":"Crossref","is-referenced-by-count":5,"title":["Ultraprecision Cutting of Nickel Plated Mold for X-Ray Mirror"],"prefix":"10.20965","volume":"10","author":[{"given":"Hirofumi","family":"Suzuki","sequence":"first","affiliation":[]},{"name":"Chubu University","sequence":"first","affiliation":[]},{"given":"Mutsumi","family":"Okada","sequence":"additional","affiliation":[]},{"given":"Yuki","family":"Masuda","sequence":"additional","affiliation":[]},{"given":"Yoshiharu","family":"Namba","sequence":"additional","affiliation":[]},{"given":"Katsuhiro","family":"Miura","sequence":"additional","affiliation":[]},{"given":"Shinya","family":"Morita","sequence":"additional","affiliation":[]},{"given":"Yutaka","family":"Yamagata","sequence":"additional","affiliation":[]},{"name":",","sequence":"additional","affiliation":[]},{"name":"MITAKA KOHKI Co. Ltd, Tokyo, Japan","sequence":"additional","affiliation":[]},{"name":"Tokyo Denki University, Tokyo, Japan","sequence":"additional","affiliation":[]},{"name":"RIKEN, Saitama, Japan","sequence":"additional","affiliation":[]}],"member":"8550","published-online":{"date-parts":[[2016,7,5]]},"reference":[{"key":"key-10.20965\/ijat.2016.p0624-1","doi-asserted-by":"crossref","unstructured":"H. Wolter, \u201cMirror systems with grazing incidence as image-forming optics for X-rays,\u201d Annals of Physics, Vol.6, No.10, pp. 94-114, 1952.","DOI":"10.1002\/andp.19524450108"},{"key":"key-10.20965\/ijat.2016.p0624-2","unstructured":"Y. Namba, T. Shimomura, T. Shimizu, H. Kunieda, Y. Ogasaka, and K. Yamashita, \u201cDevelopment of large ultra-precision diamond turning machine for making next generation hard X-ray telescopes,\u201d Proceedings of ASPE, pp. 65-68, 2007."},{"key":"key-10.20965\/ijat.2016.p0624-3","doi-asserted-by":"crossref","unstructured":"Y. Namba, T. Shimomura, A. Fushiki, A. Beaucamp, I. Inasaki, H. Kunieda, Y. Ogasaka, and K. Yamashita, \u201cUltra-precision polishing of electroless nickel molding dies for shorter wavelength applications,\u201d Annals of the CIRP, Vol.57, No.1, pp. 337-340, 2008.","DOI":"10.1016\/j.cirp.2008.03.077"},{"key":"key-10.20965\/ijat.2016.p0624-4","doi-asserted-by":"crossref","unstructured":"A. Beaucamp, Y. Namba, and R. Freeman, \u201cDynamic multiphase modelling and optimization of fluid jet polishing process,\u201d Annals of the CIRP, Vol.61, No.1, pp. 315-318, 2012.","DOI":"10.1016\/j.cirp.2012.03.073"},{"key":"key-10.20965\/ijat.2016.p0624-5","doi-asserted-by":"crossref","unstructured":"Y. Namba, T. Shimomura, A. Fushiki, A. Beaucamp, I. Inasaki, H. Kunieda, Y. Ogasaka, and K. Yamashita, \u201cUltra-precision polishing of electroless Nickel molding dies for shorter wave length applications,\u201d Annals of the CIRP, Vol.57, No.1, pp. 337-340, 2008.","DOI":"10.1016\/j.cirp.2008.03.077"},{"key":"key-10.20965\/ijat.2016.p0624-6","doi-asserted-by":"crossref","unstructured":"T. H. Kao, M. C. Huang, Y. T. Su, and J. S. Lin, \u201cElectroless nickel plating technique for depositing a nano-scale layer,\u201d Int. J. of Automation Technology, Vol.6, No.5, pp. 633-637, 2012.","DOI":"10.20965\/ijat.2012.p0633"},{"key":"key-10.20965\/ijat.2016.p0624-7","doi-asserted-by":"crossref","unstructured":"S. Maegawa, Y. Morikawa, S. Hayakawa, F. Itoigawa, and T. Nakamura, \u201cEffects of fiber orientation on tool-wear processs in down-milling of carbon fiber-reinforced plastic laminates,\u201d Int. J. of Automation Technology, Vol.9, No.4, pp. 356-364, 2015.","DOI":"10.20965\/ijat.2015.p0356"},{"key":"key-10.20965\/ijat.2016.p0624-8","doi-asserted-by":"crossref","unstructured":"M. Fujimoto, Y. Wu, M. Nomura, H. Kanai, and M. Jin, \u201cWear behavior of grain cutting edge in ultrasonic assisted grinding using mini-size wheel,\u201d Int. J. of Automation Technology, Vol.9, No.4, pp. 365-371, 2015.","DOI":"10.20965\/ijat.2015.p0365"},{"key":"key-10.20965\/ijat.2016.p0624-9","doi-asserted-by":"crossref","unstructured":"S. Ito, S. Sekine, Y. Shimizu, W. Gao, T. Fukuda, A., Kato, and K. Kubota, \u201cMeasurement of cutting edge width of a rotary cutting tool by using a laser displacement sensor,\u201d Int. J. of Automation Technology, Vol.8, No.1, pp. 28-33, 2014.","DOI":"10.20965\/ijat.2014.p0028"},{"key":"key-10.20965\/ijat.2016.p0624-10","doi-asserted-by":"crossref","unstructured":"J. Fujiwara, K. Wakao, and T. Miyamoto, \u201cInfluence of cemented carbides with polycrystalline Diamond Tool,\u201d Int. J. of Automation Technology, Vol.7, No.4, pp. 433-438, 2013.","DOI":"10.20965\/ijat.2013.p0433"},{"key":"key-10.20965\/ijat.2016.p0624-11","doi-asserted-by":"crossref","unstructured":"H. Suzuki, M. Okada, S. Matsui, and Y. Yamagata, \u201cDevelopment of micro milling tool made of single crystalline diamond for ceramic cutting,\u201d Annals of the CIRP, Vol.62, No.1, pp. 59-62, 2013.","DOI":"10.1016\/j.cirp.2013.03.096"},{"key":"key-10.20965\/ijat.2016.p0624-12","doi-asserted-by":"crossref","unstructured":"H. Suzuki, T. Furuki, M. Okada, K. Fujii, and T. Goto, \u201cPrecision cutting of structured ceramic molds with micro PCD milling tool,\u201d Int. J. of Automation Technology, Vol.5, No.3, pp. 277-282, 2011.","DOI":"10.20965\/ijat.2011.p0277"},{"key":"key-10.20965\/ijat.2016.p0624-13","doi-asserted-by":"crossref","unstructured":"H. Suzuki, M. Okada, K. Okada, and Y. Ito, \u201cPrecision cutting of ceramics with milling tool of single crystalline diamond,\u201d Int. J. of Automation Technology, Vol.9, No.1, pp. 26-32, 2015.","DOI":"10.20965\/ijat.2015.p0026"},{"key":"key-10.20965\/ijat.2016.p0624-14","doi-asserted-by":"crossref","unstructured":"H. Suzuki, \u201cMulti-axis controlled ultraprecision machining and measurement,\u201d Int. J. of Automation Technology, Vol.3, No.3, pp. 227-232, 2009.","DOI":"10.20965\/ijat.2009.p0227"},{"key":"key-10.20965\/ijat.2016.p0624-15","doi-asserted-by":"crossref","unstructured":"H. Suzuki, M. Okada, Y. Yamagata, S. Morita, and T. Higuchi, \u201cPrecision grinding of structured ceramic molds by diamond wheel trued with alloy metal,\u201d Annals of the CIRP, Vol.61, No.1, pp. 283-286, 2012.","DOI":"10.1016\/j.cirp.2012.03.063"},{"key":"key-10.20965\/ijat.2016.p0624-16","doi-asserted-by":"crossref","unstructured":"T. Hirose, Y. Kami, T. Shimizu, M. Yabuya, and Y. Morimoto, \u201cDevelopment of on-machine measurement unit for correction processing of aspheric lens mold with high numerical aperture,\u201d Int. J. of Automation Technology, Vol.8, No.1, pp. 34-42, 2014.","DOI":"10.20965\/ijat.2014.p0034"},{"key":"key-10.20965\/ijat.2016.p0624-17","doi-asserted-by":"crossref","unstructured":"W. Chen, T. Kuriyagawa, H. Huang, and N. Yosihara, \u201cMachining of micro aspherical mould inserts,\u201d Precision Engineering, Vol.29, pp. 315-323, 2005.","DOI":"10.1016\/j.precisioneng.2004.11.002"},{"key":"key-10.20965\/ijat.2016.p0624-18","unstructured":"H. Suzuki, S. Kodera, T. Nakasuji, T. Ohta, and K. Syoji, \u201cPrecision Grinding of Aspherical CVD-SiC Molding Die,\u201d International Journal of the Japan Society for Precision Engineering, Vol. 32, pp. 25-30, 1998."},{"key":"key-10.20965\/ijat.2016.p0624-19","unstructured":"H. Suzuki, A. Muramatsu, Y. Ymamoto, T. Okino, and T. Moriwaki, \u201cPrecision molding of micro apherical glass lenses,\u201d Proceedings of 5th euspen International Conference, Montpellier, Vol.1, pp. 41-44, 2005."},{"key":"key-10.20965\/ijat.2016.p0624-20","doi-asserted-by":"crossref","unstructured":"E. Brinksmeier, O. Riemer, A. Gessenharter, and L. Autschbach, \u201cPolishing of structured molds,\u201d Annals of the CIRP,\u201d Vol.53, No.1, pp. 247-250, 2004.","DOI":"10.1016\/S0007-8506(07)60690-8"},{"key":"key-10.20965\/ijat.2016.p0624-21","doi-asserted-by":"crossref","unstructured":"H. Suzuki, S. Hamada, T. Okino, M. Kondo, Y. Yamagata, and T. Higuchi, \u201cUltraprecision finishing of micro-aspheric surface by ultrasonic two-axis vibration assisted polishing,\u201d Annals of the CIRP,Vol.59, pp. 347-350, 2010.","DOI":"10.1016\/j.cirp.2010.03.117"}],"container-title":["International Journal of Automation Technology"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/www.fujipress.jp\/main\/wp-content\/themes\/Fujipress\/phyosetsu.php?ppno=IJATE001000040019","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2017,6,16]],"date-time":"2017-06-16T06:37:07Z","timestamp":1497595027000},"score":1,"resource":{"primary":{"URL":"https:\/\/www.fujipress.jp\/ijat\/au\/ijate001000040624"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2016,7,5]]},"references-count":21,"journal-issue":{"issue":"4","published-online":{"date-parts":[[2016,7,5]]},"published-print":{"date-parts":[[2016,7,5]]}},"URL":"https:\/\/doi.org\/10.20965\/ijat.2016.p0624","relation":{},"ISSN":["1883-8022","1881-7629"],"issn-type":[{"type":"electronic","value":"1883-8022"},{"type":"print","value":"1881-7629"}],"subject":[],"published":{"date-parts":[[2016,7,5]]}}}