{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,8,7]],"date-time":"2024-08-07T01:00:17Z","timestamp":1722992417010},"reference-count":10,"publisher":"Fuji Technology Press Ltd.","issue":"6","content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":["Int. J. Automation Technol.","IJAT"],"published-print":{"date-parts":[[2013,11,5]]},"abstract":"The nitric acid corrosion method that is currently in use in the production field to inspect for grinding burns on workpieces has some disadvantages: its detection levels depend on people and equipment, and is a destructive inspection method that does not allow for a total inspection. This study therefore aims to develop a non-destructive technology for detecting grinding burns, one that will allow for quantitative total inspections on a production line. An eddy current sensor seems very promising as a means of performing non-destructive inspections because of its short measuring time and low costs. In this paper, we propose a method of simultaneously measuring the eddy current sensor\u2019s output at two different frequencies (the multi-frequency measuring method), as this method is not affected by any variations in the basic material of the inspection object, and we then verify its effectiveness. In addition, we prototype a grinding burn detection system using the proposed measuring method, and we evaluate the determinations it makes on grinding burns on workpieces. As a result, the proposed multi-frequency measuring method is found capable of determining grinding burns on workpieces more quantitatively and with higher sensitivity than the nitric acid corrosion method.<\/jats:p>","DOI":"10.20965\/ijat.2013.p0700","type":"journal-article","created":{"date-parts":[[2016,4,14]],"date-time":"2016-04-14T02:04:52Z","timestamp":1460599492000},"page":"700-707","source":"Crossref","is-referenced-by-count":4,"title":["Development of Non-Destructive Technology for Detecting Grinding Burns"],"prefix":"10.20965","volume":"7","author":[{"given":"Takayuki","family":"Azuma","sequence":"first","affiliation":[]},{"name":"JTEKT Corporation, 1-1 Asahi-machi, Kariya, Aichi 446-8652, Japan","sequence":"first","affiliation":[]},{"given":"Ryo","family":"Ito","sequence":"additional","affiliation":[]},{"given":"Shinji","family":"Soma","sequence":"additional","affiliation":[]},{"given":"Shinji","family":"Murakami","sequence":"additional","affiliation":[]},{"given":"Tsunemoto","family":"Kuriyagawa","sequence":"additional","affiliation":[]},{"name":"Tohoku University, 6-6-01 Aoba, Aramaki, Aoba-ku, Sendai, Miyagi 980-8579, Japan","sequence":"additional","affiliation":[]}],"member":"8550","published-online":{"date-parts":[[2013,11,5]]},"reference":[{"key":"key-10.20965\/ijat.2013.p0700-1","unstructured":"N. Takenaka and H. Sato, \u201cTroubles and measures of Grinding,\u201d SeibundoShinkosha Publishing Co.,Ltd, p. 72, 1972. (in Japanese)"},{"key":"key-10.20965\/ijat.2013.p0700-2","unstructured":"Y. Ito and Y. Furuya, \u201cNondestructive Material Evaluation by Barkhausen Noise Analysis \u2013 Part 1: Basics of Barkhausen Noise Method \u2013,\u201d J. of JSNDI, Vol.45, No.1, p. 3, 1996. (in Japanese)"},{"key":"key-10.20965\/ijat.2013.p0700-3","unstructured":"The Japanese Society for Non-destructive Inspection (Ed.), \u201cEddy Current Testing I,\u201d The Japanese Society for Non-destructive Inspection, p. 17, 1995. (in Japanese)"},{"key":"key-10.20965\/ijat.2013.p0700-4","unstructured":"H. Shimoda, \u201cInfluence of Affected Layer to given to the X-Ray StressMeasurement,\u201d J. of the Japanese Society for Non-destructive Inspection, Vol.10, No.5, p. 239, 1961. (in Japanese)"},{"key":"key-10.20965\/ijat.2013.p0700-5","doi-asserted-by":"crossref","unstructured":"T. Semba, Y. Tani, and H. Sato, \u201cQuantitative Evaluation of Damaged Layer of Ground Surface by Scanning Acoustic Microscopy,\u201d SEISAN KENKYU, Vol.39, No.4, p. 145, 1987. (in Japanese)","DOI":"10.1299\/kikaic.53.780"},{"key":"key-10.20965\/ijat.2013.p0700-6","unstructured":"R. Ito, T. Azuma, S. Soma, S.Murakami, and T. Kuriyagawa, \u201cDevelopment of non-destructive inspection system for grinding burn (1st Report) Detection of grinding burn utilizing eddy current sensor,\u201d J. of the Japan Society for Abrasive Technology, Vol.56, No.8, pp. 533-538, 2012. (in Japanese)"},{"key":"key-10.20965\/ijat.2013.p0700-7","doi-asserted-by":"crossref","unstructured":"S.Matsui, R. Honda, and R. Setoguchi, \u201cStudies on Grinding Burn,\u201d The Japan Society for Precision Engineering, Vol.31, No.12, p. 996, 1965. (in Japanese)","DOI":"10.2493\/jjspe1933.31.996"},{"key":"key-10.20965\/ijat.2013.p0700-8","doi-asserted-by":"crossref","unstructured":"M. Mikami, \u201cMagnetic Studies on the Amount of Retained Austenite in Quenched Steel,\u201d The Japan Society ofMechanical Engineers, Vol.37, No.204, p. 217, 1934. (in Japanese)","DOI":"10.1299\/jsmemagazine.37.204_217"},{"key":"key-10.20965\/ijat.2013.p0700-9","unstructured":"The Japanese Society for Non-destructive Inspection (Ed.), \u201cEddy Current Testing II,\u201d The Japanese Society for Non-destructive Inspection, p. 35, 1995. (in Japanese)"},{"key":"key-10.20965\/ijat.2013.p0700-10","unstructured":"R. Ito, T. Azuma, S. Soma, S. Murakami, and T. Kuriyagawa, \u201cDevelopment of non-destructive inspection system for grinding burn (2st Report) Disturbance reduction techniques for eddy current sensor,\u201d J. of the Japan Society for Abrasive Technology, Vol.56, No.10, pp. 677-684, 2012. (in Japanese)"}],"container-title":["International Journal of Automation Technology"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/www.fujipress.jp\/main\/wp-content\/themes\/Fujipress\/phyosetsu.php?ppno=IJATE000700060012","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2019,9,6]],"date-time":"2019-09-06T12:07:00Z","timestamp":1567771620000},"score":1,"resource":{"primary":{"URL":"https:\/\/www.fujipress.jp\/ijat\/au\/ijate000700060700"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2013,11,5]]},"references-count":10,"journal-issue":{"issue":"6","published-online":{"date-parts":[[2013,11,5]]},"published-print":{"date-parts":[[2013,11,5]]}},"URL":"https:\/\/doi.org\/10.20965\/ijat.2013.p0700","relation":{},"ISSN":["1883-8022","1881-7629"],"issn-type":[{"type":"electronic","value":"1883-8022"},{"type":"print","value":"1881-7629"}],"subject":[],"published":{"date-parts":[[2013,11,5]]}}}