MS16-120: Security update for Microsoft graphics component: October 11, 2016

Security update file names

For all supported 32-bit editions of Windows Vista:
Windows6.0-KB3191203-x86.msu

For all supported x64-based editions of Windows Vista:
Windows6.0-KB3191203-x64.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base article 934307

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Update log file

Not applicable

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3191203

Registry key verification

This update does not add a registry key to validate its installation.

Security update file names

For all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB3191203-x86.msu

For all supported x64-based editions of Windows Server 2008:
Windows6.0-KB3191203-x64.msu

For all supported Itanium-based editions of Windows Server 2008:
Windows6.0-KB3191203-ia64.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base article 934307

Update log file

Not applicable

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3191203

Registry key verification

This update does not add a registry key to validate its installation.

Security update file name

For all supported 32-bit editions of Windows 7:
Windows6.1-KB3192391-x86.msu
Security Only

For all supported 32-bit editions of Windows 7:
Windows6.1-KB3185330-x86.msu
Monthly Rollup

For all supported x64-based editions of Windows 7:
Windows6.1-KB3192391-x64.msu
Security Only

For all supported x64-based editions of Windows 7:
Windows6.1-KB3185330-x64.msu
Monthly Rollup

Installation switches

See Microsoft Knowledge Base article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3192391
See Microsoft Knowledge Base article 3185330

Registry key verification

Note This update does not add a registry key to validate its installation.

Security update file name

For all supported x64-based editions of Windows Server 2008 R2:
Windows6.1-KB3192391-x64.msu
Security Only

For all supported x64-based editions of Windows Server 2008 R2:
Windows6.1-KB3185330-x64.msu
Monthly Rollup

For all supported Itanium-based editions of Windows Server 2008 R2:
Windows6.1-KB3192391-ia64.msu
Security Only

For all supported Itanium-based editions of Windows Server 2008 R2:
Windows6.1-KB3185330-ia64.msu
Monthly Rollup

Installation switches

See Microsoft Knowledge Base article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3192391
See Microsoft Knowledge Base article 3185330

Registry key verification

Note This update does not add a registry key to validate its installation.

Security update file name

For all supported 32-bit editions of Windows 8.1:
Windows8.1-KB3192392-x86.msu
Security Only

For all supported 32-bit editions of Windows 8.1:
Windows8.1-KB3185331-x86.msu
Monthly Rollup

For all supported x64-based editions of Windows 8.1:
Windows8.1-KB3192392-x64.msu
Security Only

For all supported x64-based editions of Windows 8.1:
Windows8.1-KB3185331-x64.msu
Monthly Rollup

Installation switches

See Microsoft Knowledge Base article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or Click Control Panel, click System and Security, and then click Windows Update. Under See also, click Installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3192392
See Microsoft Knowledge Base article 3185331

Registry key verification

Note This update does not add a registry key to validate its installation.

Security update file name

For all supported editions of Windows Server 2012:
Windows8-RT-KB3192393-x64.msu
Security Only

For all supported editions of Windows Server 2012:
Windows8-RT-KB3185332-x64.msu
Monthly Rollup

For all supported editions of Windows Server 2012 R2:
Windows8.1-KB3192392-x64.msu
Security Only

For all supported editions of Windows Server 2012 R2:
Windows8.1-KB3185331-x64.msu
Monthly Rollup

Installation switches

See Microsoft Knowledge Base article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or Click Control Panel, click System and Security, and then click Windows Update. Under See also, click Installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3192393
See Microsoft Knowledge Base article 3185332

Registry key verification

Note This update does not add a registry key to validate its installation.

Deployment

The 3192392 update is available via Windows Update only.

Restart Requirement

Yes, you must restart your system after you apply this security update.

Removal Information

Click Control Panel, click System and Security, and then click Windows Update. Under See also, click Installed updates, and then select from the list of updates.

File Information

See Microsoft Knowledge Base article 3192392

Security update file name

For all supported 32-bit editions of Windows 10:
Windows10.0-KB3192440-x86.msu

For all supported x64-based editions of Windows 10:
Windows10.0-KB3192440-x64.msu

For all supported 32-bit editions of Windows 10 Version 1511:
Windows10.0-KB3192441-x86.msu

For all supported x64-based editions of Windows 10 Version 1511:
Windows10.0-KB3192441-x64.msu

For all supported 32-bit editions of Windows 10 Version 1607:
Windows10.0-KB3194798-x86.msu

For all supported x64-based editions of Windows 10 Version 1607:
Windows10.0-KB3194798-x64.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base article 934307

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3192440
See Microsoft Knowledge Base article 3192441
See Microsoft Knowledge Base article 3194798

Registry key verification

These updates do not add a registry key to validate their installation.

Security update file names

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 32-bit editions of Windows Vista:
Windows6.0-KB3188726-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Vista:
NDP45-KB3189039-x86.msi

For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Vista:
NDP46-KB3189040-x86.msi

Security update file names

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 64-bit editions of Windows Vista:
Windows6.0-KB3188726-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 64-bit editions of Windows Vista:
NDP45-KB3189039-x86.msi

For Microsoft .NET Framework 4.6 when installed on all supported 64-bit editions of Windows Vista:
NDP46-KB3189040-x86.msi

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3188726_*-msi0.txt
Microsoft .NET Framework 3.0-KB3188726_*.html

For Microsoft .NET Framework 4.5.2:
KB3189039_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3189039_*_*.html

For Microsoft .NET Framework 4.6:
KB3189040_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3189040_*_*.html

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188726
See Microsoft Knowledge Base article 3189039
See Microsoft Knowledge Base article 3189040

Registry key verification

For Microsoft .NET Framework 3.0 Service Pack 2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB3189039
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\ KB3189040
"ThisVersionInstalled" = "Y"

Security update file names

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB3188726-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008:
NDP45-KB3189039-x86.msi

For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008:
NDP46-KB3189040-x86.msi

Security update file names

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 64-bit editions of Windows Server 2008:
Windows6.0-KB3188726-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 64-bit editions of Windows Server 2008:
NDP45-KB3189039-x86.msi

For Microsoft .NET Framework 4.6 when installed on all supported 64-bit editions of Windows Server 2008:
NDP46-KB3189040-x86.msi

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3188726_*-msi0.txt
Microsoft .NET Framework 3.0-KB3188726_*.html

For Microsoft .NET Framework 4.5.2:
KB3189039_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3189039_*_*.html

For Microsoft .NET Framework 4.6:
KB3189040_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3189040_*_*.html

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188726
See Microsoft Knowledge Base article 3189039
See Microsoft Knowledge Base article 3189040

Registry key verification

For Microsoft .NET Framework 3.0 Service Pack 2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB3189039
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\ KB3189040
"ThisVersionInstalled" = "Y"

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1:
Windows6.1-KB3188730-x86.msu

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1:
Windows6.1-KB3188730-x64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

Not applicable.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188730

Registry key verification

This update does not add a registry key to validate its installation. Use WMI to detect this update.

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
Windows6.1-KB3188730-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Update log file

Not applicable

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188730

Registry key verification

For Microsoft .NET Framework 3.5.1:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

Security update file name

For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems:
Windows8.1- KB3188732-x86.msu

For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems:
Windows8.1-KB3188732-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security. Under Windows Update, click View update history, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188732

Registry key verification

These updates do not add a registry key to validate their installation.

Security update file name

For Microsoft .NET Framework 3.5 on Windows Server 2012:
Windows8-RT-KB3188731-x64.msu

For Microsoft .NET Framework 3.5 on Windows Server 2012 R2:
Windows8.1-KB3188732-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security. Under Windows Update, click View update history, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188731
See Microsoft Knowledge Base article 3188732

Registry key verification

These updates do not add a registry key to validate their installation.

Security update file name

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10:
Windows10.0-KB3192440-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10:
Windows10.0-KB3192440-x64.msu

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1511:
Windows10.0-KB3192441-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1511:
Windows10.0-KB3192441-x64.msu

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1607:
Windows10.0-KB3194798-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1607:
Windows10.0-KB3194798-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3192440
See Microsoft Knowledge Base article 3192441
See Microsoft Knowledge Base article 3194798

Registry key verification

These updates do not add a registry key to validate their installation.

Security update file names

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 32-bit editions of Windows Vista:
Windows6.0-KB3188735-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Vista:
NDP45-KB3189051-x86.msi

For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Vista:
NDP46-KB3189052-x86.msi

Security update file names

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 64-bit editions of Windows Vista:
Windows6.0-KB3188735-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 64-bit editions of Windows Vista:
NDP45-KB3189051-x86.msi

For Microsoft .NET Framework 4.6 when installed on all supported 64-bit editions of Windows Vista:
NDP46-KB3189052-x86.msi

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3188735_*-msi0.txt
Microsoft .NET Framework 3.0-KB3188735_*.html

For Microsoft .NET Framework 4.5.2:
KB3189051_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3189051_*_*.html

For Microsoft .NET Framework 4.6:
KB3189052_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3189052_*_*.html

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188735
See Microsoft Knowledge Base article 3189051
See Microsoft Knowledge Base article 3189052

Registry key verification

For Microsoft .NET Framework 3.0 Service Pack 2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB3189051
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\ KB3189052
"ThisVersionInstalled" = "Y"

Security update file names

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB3188735-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008:
NDP45-KB3189051-x86.msi

For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008:
NDP46-KB3189052-x86.msi

Security update file names

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 64-bit editions of Windows Server 2008:
Windows6.0-KB3188735-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 64-bit editions of Windows Server 2008:
NDP45-KB3189051-x86.msi

For Microsoft .NET Framework 4.6 when installed on all supported 64-bit editions of Windows Server 2008:
NDP46-KB3189052-x86.msi

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3188735_*-msi0.txt
Microsoft .NET Framework 3.0-KB3188735_*.html

For Microsoft .NET Framework 4.5.2:
KB3189051_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3189051_*_*.html

For Microsoft .NET Framework 4.6:
KB3189052_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3189052_*_*.html

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188735
See Microsoft Knowledge Base article 3189051
See Microsoft Knowledge Base article 3189052

Registry key verification

For Microsoft .NET Framework 3.0 Service Pack 2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB3189051
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\ KB3189052
"ThisVersionInstalled" = "Y"

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1:
Windows6.1-KB3188740-x86.msu

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1:
Windows6.1-KB3188740-x64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

Not applicable.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188740

Registry key verification

This update does not add a registry key to validate its installation. Use WMI to detect this update.

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
Windows6.1-KB3188740-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Update log file

Not applicable

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188740

Registry key verification

For Microsoft .NET Framework 3.5.1:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

Security update file name

For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB3188743-x86.msu

For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems:
Windows8.1-KB3188743-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security. Under Windows Update, click View update history, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188743

Registry key verification

These updates do not add a registry key to validate their installation.

Security update file name

For Microsoft .NET Framework 3.5 on Windows Server 2012:
Windows8-RT-KB3188741-x64.msu

For Microsoft .NET Framework 3.5 on Windows Server 2012 R2:
Windows8.1-KB3188743-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security. Under Windows Update, click View update history, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3188741
See Microsoft Knowledge Base article 3188743

Registry key verification

These updates do not add a registry key to validate their installation.

Security update file name

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10:
Windows10.0-KB3192440-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10:
Windows10.0-KB3192440-x64.msu

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1511:
Windows10.0-KB3192441-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1511:
Windows10.0-KB3192441-x64.msu

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1607:
Windows10.0-KB3194798-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1607:
Windows10.0-KB3194798-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3192440
See Microsoft Knowledge Base article 3192441
See Microsoft Knowledge Base article 3194798

Registry key verification

These updates do not add a registry key to validate their installation.

Security update file name

For Microsoft Word Viewer:
office2003-kb3118394-fullfile-enu.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

Use Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base article 3118394

Registry key verification

Not applicable

Security update file name

For all supported editions of Microsoft Office 2007:
ogl2007-KB3118301-fullfile-x86-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

Use Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base article 3118301

Registry key verification

Not applicable

Security update file name

For all supported editions of Microsoft Office 2010 (32-bit editions):
ogl2010-KB3118317-fullfile-x86-glb.exe

For all supported editions of Microsoft Office 2010 (64-bit editions):
ogl2010-KB3118317-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

Use Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base article 3118317

Registry key verification

Not applicable

Security update file name

For Microsoft Live Meeting 2007 Console (3189647):
LMSetup.exe

For Microsoft Lync 2010 (32-bit) (3188397):
lync.msp

For Microsoft Lync 2010 (64-bit) (3188397):
lync.msp

For Microsoft Lync 2010 Attendee (user level install) (3188399):
AttendeeUser.msp

For Microsoft Lync 2010 Attendee (admin level install) (3188400):
AttendeeAdmin.msp

For all supported editions of Microsoft Lync 2013 (Skype for Business) (32-bit) and Microsoft Lync Basic 2013 (Skype for Business Basic) (32-bit):
lync2013-KB3118348-fullfile-x86-glb.exe

For all supported editions of Microsoft Lync 2013 (Skype for Business) (64-bit) and Microsoft Lync Basic 2013 (Skype for Business Basic) (64-bit):
lync2013-KB3118348-fullfile-x64-glb.exe

For all supported 32-bit editions of Skype for Business 2016 and Skype for Business Basic 2016:
lync2016-KB3118327-fullfile-x86-glb.exe

For all supported 64-bit editions of Skype for Business 2016 and Skype for Business Basic 2016:
lync2016-KB3118327-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal Information

Use Add or Remove Programs item in Control Panel.

File Information

For Microsoft Live Meeting 2007 Console:
See Microsoft Knowledge Base article xxxxxx

For all supported editions of Microsoft Lync 2010:
See Microsoft Knowledge Base article xxxxxx

For Microsoft Lync 2010 Attendee (user level install):
See Microsoft Knowledge Base article xxxxxx

For Microsoft Lync 2010 Attendee (admin level install):
See Microsoft Knowledge Base article xxxxxx

For Microsoft Lync 2013 (Skype for Business) and Microsoft Lync Basic 2013 (Skype for Business Basic):
See Microsoft Knowledge Base article 3118348

For Skype for Business 2016 and Skype for Business Basic 2016:
See Microsoft Knowledge Base article 3118327

Registry Key Verification

For Microsoft Live Meeting 2007 Console:
Not applicable

For Microsoft Lync 2010 (32-bit):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4498

For Microsoft Lync 2010 (64-bit):
HKEY_LOCAL_MACHINE\ SOFTWARE\Wow6432Node\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4498

For Microsoft Lync 2010 Attendee (user level install):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4498

For Microsoft Lync 2010 Attendee (admin level install):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\94E53390F8C13794999249B19E6CFE33\InstallProperties\DisplayVersion = 4.0.7577.4498

For Microsoft Lync 2013 (Skype for Business) and Microsoft Lync Basic 2013 (Skype for Business Basic):
Not applicable

For Skype for Business 2016 and Skype for Business Basic 2016:
Not applicable

Security update file names

For Microsoft Silverlight 5 when installed on Mac:
Silverlight.dmg

For Microsoft Silverlight 5 Developer Runtime when installed on Mac:
silverlight_developer.dmg

Restart requirement

This update does not require a restart.

Removal information

Open the Finder, select the system drive, go to the folder Internet Plug-ins - Library, and delete the file Silverlight.Plugin. (Note that the update cannot be removed without removing the Silverlight plug-in.)

File information

See Microsoft Knowledge Base article 2932677

Installation verification

See the Update FAQ section in this bulletin that addresses the question, "How do I know which version and build of Microsoft Silverlight is currently installed?"

Security update file names

For Microsoft Silverlight 5 when installed on all supported 32-bit releases of Microsoft Windows:
silverlight.exe

For Microsoft Silverlight 5 Developer Runtime when installed on all supported 32-bit releases of Microsoft Windows:
silverlight_developer.exe

For Microsoft Silverlight 5 when installed on all supported 64-bit releases of Microsoft Windows:
silverlight_x64.exe

For Microsoft Silverlight 5 Developer Runtime when installed on all supported 64-bit releases of Microsoft Windows:
silverlight_developer_x64.exe

Installation switches

See the Silverlight Enterprise Deployment Guide

Restart requirement

This update does not require a restart.

Removal information

Use Add or Remove Programs item in Control Panel. (Note that the update cannot be removed without removing Silverlight.)

File information

See Microsoft Knowledge Base article 3193713

Registry key verification

For 32-bit installations of Microsoft Silverlight 5:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Silverlight "Version" = "5.1.50901.0"

For 64-bit installations of Microsoft Silverlight 5:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Silverlight "Version" = "5.1.50901.0"
and
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Silverlight "Version" = "5.1.50901.0"