Computational analyses of pinching dynamics of a finger exoskeleton composed of IPMC actuators | International Journal of Precision Engineering and Manufacturing Skip to main content
Springer Nature Link
Log in

Computational analyses of pinching dynamics of a finger exoskeleton composed of IPMC actuators

  • Published:
International Journal of Precision Engineering and Manufacturing Aims and scope Submit manuscript

Abstract

There is an increased demand for hand exoskeletons that are light weight, low profile, and flexible, and that consume less power. In order to replace the rigid actuators such as motors and pneumatic cylinders, an ionic polymer metal composite (IPMC) actuator may be a good candidate. Because of the limited forces generated by IPMC actuators, prediction of the IPMC actuation force for the required fingertip force is important in designing and improving the performance of a finger exoskeleton. Anthropomorphic data on index fingers and the stiffness of a finger joint were measured, and a standard index finger model was established. Electromechanical characteristics of IPMC actuators were experimentally measured and mathematically modeled. These were incorporated into the dynamics of an index finger actuated by IPMC, and the dynamics of tip pinching were simulated. The arrangement of IPMC actuators at the initial position significantly affected the required actuator force to hold a given load. The maximum actuator force required to hold 0.98 N of fingertip load decreased by 50% for IPMC actuators that were arranged straight at the initial pinching position as compared to straight at the initial open position.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
¥17,985 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Japan)

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Gopura, R. A. R. C. and Kiguchi, K., “Mechanical designs of active upper-limb exoskeleton robots: State-of-the-art and design difficulties,” Proceedings of the 2009 IEEE 11th International Conference on Rehabilitation Robotics, pp. 178–187, 2009.

  2. Mulas, M., Folgheraiter, M., and Gini, G., “An EMG-controlled exoskeleton for hand rehabilitation,” Proceedings of the 2005 IEEE 9th International Conference on Rehabilitation Robotics, pp. 371–374, 2005.

  3. Sarakoglou, I., Tsagarakis, N., and Caldwell, D., “Occupational and physical therapy using a hand exoskeleton based exerciser,” Proceedings of 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2973–2978, 2004.

  4. Wege, A. and Hommel, G., “Development and control of a hand exoskeleton for rehabilitation of hand injuries,” Proceedings of the 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 3046–3051, 2005.

  5. Lucas, L., DiCicco, M., and Matsuoka, Y., “An EMG-controlled hand exoskeleton for natural pinching,” Journal of Robotics and Mechatronics, Vol. 16, No. 5, pp. 482–488, 2004.

    Google Scholar 

  6. Sasaki, D., Noritsugu, T., Takaiwa, M., and Yamamoto, H., “Wearable power assist device for hand grasping using pneumatic artificial rubber muscle,” Proceedings of the 2004 IEEE International Workshop on Robot and Human Interactive Communication, pp. 655–660, 2004.

  7. Mihelj, M., Nef, T., and Riener, R., “ARMin-toward a six DoF upper limb rehabilitation robot,” Proceedings of the first IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, pp. 1154–1159, 2006.

  8. Cruz, E. and Kamper, D., “Use of a novel robotic interface to study finger motor control,” Annals of Biomedical Engineering, Vol. 38, No. 2, pp. 259–268, 2010.

    Article  Google Scholar 

  9. Bar-Cohen, Y., “Electroactive polymer (EAP) actuators as artificial muscles: reality, potential, and challenges, 2nd ed.,” SPIE Press, 2004.

  10. Shahinpoor, M. and Kim, K. J., “Ionic polymer-metal composites: III. Modeling and simulation as biomimetic sensors, actuators, transducers, and artificial muscles,” Smart Materials and Structures, Vol. 13, No. 6, pp. 1362–1388, 2004.

    Article  Google Scholar 

  11. Bar-Cohen, Y., “Electroactive Polymer Actuators and Devices (EAPAD),” Proceedings of SPIE’s 6th Annual International Symposium on Smart Structures and Materials, 1999.

  12. Mirfakhrai, T., Madden, J. D. W., and Baughman, R. H., “Polymer artificial muscles,” Materials Today, Vol. 10, No. 4, pp. 30–38, 2007.

    Article  Google Scholar 

  13. Herr, H. and Kornbluh, R., “New horizons for orthotic and prosthetic technology: artificial muscle for ambulation,” Proceedings of the Smart Structures and Materials: Electroactive Polymer Actuators and Devices (EAPAD), pp. 1–9, 2004.

  14. Pei, Q., Rosenthal, M. A., Pelrine, R., Stanford, S., and Kornbluh, R. D., “Multifunctional electroelastomer roll actuators and their application for biomimetic walking robots,” Proceedings of the Smart Structures and Materials: Electroactive Polymer Actuators and Devices (EAPAD), pp. 281–290, 2003.

  15. Ashley, S., “Artificial muscles,” Scientific American, Vol. 289, pp. 52–59, 2003.

    Article  Google Scholar 

  16. Yamakita, M., Kamamichi, N., Kaneda, Y., Asaka, K., and Luo, Z. W., “Development of an artificial muscle linear actuator using ionic polymer-metal composites,” Advanced Robotics, Vol. 18, No. 4, pp. 383–399, 2004.

    Article  Google Scholar 

  17. Shahinpoor, M., “Implantable Heart-Assist and Compression Devices Employing an Active Network of Electrically-Controllable Ionic Polymer-Metal Nanocomposites, in: Biomedical Applications of Electroactive Polymer Actuators,” John Wiley, pp. 137–159, 2009.

  18. Kim, C., Kim, S., Yang, H., Park, N., and Park, Y., “An Auto-focus Lens Actuator Using Ionic Polymer Metal Composites: Design, Fabrication and Control,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 10, pp. 1883–1887, 2012.

    Article  Google Scholar 

  19. Yamakita, M., Sera, A., Kamamichi, N., Asaka, K., and Luo, Z. W., “Integrated design of IPMC actuator/sensor,” Proceedings of the 2006 IEEE International Conference on Robotics and Automation, pp. 1834–1839, 2006.

  20. Biddiss, E. and Chau, T., “Electroactive polymeric sensors in hand prostheses: Bending response of an ionic polymer metal composite,” Medical Engineering and Physics, Vol. 28, No. 6, pp. 68–78, 2006.

    Article  Google Scholar 

  21. Wang, J., Li, J., Zhang, Y., and Wang, S., “Design of an exoskeleton for index finger rehabilitation,” Proceedings of the 31st Annual International Conference of the IEEE EMBS, pp. 5957–5960, 2009.

  22. Petroff, N., Reisinger, K. D., and Mason, P. A. C., “Fuzzy-control of a hand orthosis for restoring tip pinch, lateral pinch, and cylindrical prehensions to patients with elbow flexion intact,” IEEE Transactions On Neural Systems and Rehabilitation Engineering, Vol. 9, No. 2, pp. 225–231, 2001.

    Article  Google Scholar 

  23. Nakagawara, S., Kajimoto, H., Kawakami, N., Tachi, S., and Kawabuchi, I., “An encounter-type multi-fingered master hand using circuitous joints,” Proceedings of the 2005 IEEE International Conference on Robotics and Automation, pp. 2667–2672, 2005.

  24. Stergiopoulos, P., Fuchs, P., and Laurgeau, C., “Design of a 2-finger hand exoskeleton for VR grasping simulation,” Eurohaptics, pp. 80–93, 2003.

  25. Deole, U., Lumia, R., Shahinpoor, M., and Bermudez, M., “Design and test of IPMC artificial muscle microgripper,” Journal of Micro-Nano Mechatron, Vol. 4, No. 3, pp. 95–102, 2008.

    Article  Google Scholar 

  26. Nakabo, Y., Mukai, T., and Asaka, K., “Biomimetic soft robots using IPMC,” Electroactive Polymers for Robotic Applications: Artificial Muscles and Sensor, pp. 165–198, 2007.

  27. Yamakita, M., Kamamichi, N., Luo, Z., and Asaka, K., “Robotic application of IPMC actuators with redoping capability,” Electroactive Polymers for Robotic Applications: Artificial Muscles and Sensor, pp. 199–225, 2007.

  28. Yim, W. and Kim, K., “Dynamic Modeling of Segmented IPMC Actuator,” Electroactive Polymers for Robotic Applications: Artificial Muscles and Sensor, pp. 263–277, 2007.

  29. Arslan, Y. Z., Hacioglu, Y., and Yagiz, N., “Prosthetic hand finger control using fuzzy sliding modes,” Journal of Intelligent Robotics Systems, Vol. 52, No. 1, pp. 121–138, 2008.

    Article  Google Scholar 

  30. Lee, S. J., Han, M. J., Kim, S. J., Jho, J. Y., Lee, H. Y., and Kim, Y. H., “A new fabrication method for IPMC actuators and application to artificial fingers,” Smart Materials Structures, Vol. 15, No. 5, pp. 1217–1224, 2006.

    Article  Google Scholar 

  31. Lughmani, W. A., Jho, J. Y., Lee, J. Y., and Rhee, K., “Modeling of bending behavior of IPMC beams using concentrated ion boundary layer,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 5, pp. 131–139, 2009.

    Article  Google Scholar 

  32. Park, K. C., “A Study on Position/Impact/Force Control of Redundant Robot Manipulators,” M.S Dissertation, Mechanical Engineering, KAIST, 1993.

  33. Craig, J. J., “Introduction to robotics, 2nd ed.,” MA: Addison-Wesley Reading, pp. 195–210, 1989.

    MATH  Google Scholar 

  34. Lian, H., Qian, W., Estevez, L., Liu, H., Liu, Y., Jiang, T., Wang, K., Guo, W., and Giannelis, E. P., “Enhanced actuation in functionalized carbon nanotube-Nafion composites,” Sensors and Actuators B: Chemical, Vol. 156, No. 1, pp. 187–193, 2011.

    Article  Google Scholar 

  35. Jung, J.-H., Jeon, J.-H., Sridhar, V., and Oh, I.-K., “Electro-active graphene-Nafion actuators,” Carbon, Vol. 49, No. 4, pp. 1279–1289, 2011.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, College of Engineering, Myongji University, Yongin, South Korea, 449-728

    Soo Jin Lee, Yoon Jeong Kim, Gwang Hun Jeong & Kyehan Rhee

  2. Department of Chemical and Biological Engineering, College of Engineering, Seoul National University, Seoul, South Korea, 151-742

    Bye Ri Yoon & Jae Young Jho

  3. Department of Electrical Engineering, College of Engineering, Hongik University, Jochiwon, South Korea, 339-701

    Dong Min Kim

Authors
  1. Soo Jin Lee
    View author publications

    You can also search for this author inPubMed Google Scholar

  2. Yoon Jeong Kim
    View author publications

    You can also search for this author inPubMed Google Scholar

  3. Gwang Hun Jeong
    View author publications

    You can also search for this author inPubMed Google Scholar

  4. Bye Ri Yoon
    View author publications

    You can also search for this author inPubMed Google Scholar

  5. Jae Young Jho
    View author publications

    You can also search for this author inPubMed Google Scholar

  6. Dong Min Kim
    View author publications

    You can also search for this author inPubMed Google Scholar

  7. Kyehan Rhee
    View author publications

    You can also search for this author inPubMed Google Scholar

Corresponding author

Correspondence to Kyehan Rhee.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Lee, S.J., Kim, Y.J., Jeong, G.H. et al. Computational analyses of pinching dynamics of a finger exoskeleton composed of IPMC actuators. Int. J. Precis. Eng. Manuf. 13, 2135–2141 (2012). https://doi.org/10.1007/s12541-012-0283-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12541-012-0283-0

Keywords